a kannel restart and
message resubmit in our application if some time has elapsed since the
message was passed on to kannel but we did not receive a submit_sm_resp.
Thanks,
Andrew
--
*From:* Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com]
*Sent
--
*From:* Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com]
*Sent:* Tuesday, 20 April 2010 4:29 PM
*To:* Andrew Toth
*Cc:* Juan Nin; users@kannel.org
*Subject:* Re: receipted_msg_id in dlr?
Andrew,
Sorry I don't get the question.
If the message_id
I've managed to find it by replacing 1.4.3 by 1.4.1.
2010/4/20 Nikos Balkanas nbalka...@gmail.com
Hi Alex,
It seems that the 1.4.1 link is conspicually missing from older versions
section. Could you please add it?
Thanks,
Nikos
- Original Message - From: Alejandro Guerrieri
That's most probably a custom-patched version to connect to a non-standard
smsc. Those parameters are not documented on Kannel's user guide because
they do not exist.
Probably someone modified the source code to add those parameters. If you
have access to that code you could compare it against
1.4.1,
but I didn't find the original (unmodified) source code, and not in
kannel.org either (http://www.kannel.org/olddownload.shtml).
Does anybody has a clean (official) 1.4.1 source code, so I could make some
comparison?
Regards,
Antti
On 17.4.2010, at 19.50, Alejandro Guerrieri wrote
Weird, that's exactly what %F should do. Maybe those dashes are causing the
trouble?
Regards,
Alex
On Fri, Apr 16, 2010 at 3:22 AM, Andrew Toth at...@mobiledatagroup.comwrote:
Hi,
Thanks for the response, unfortunately that is not what we're after. See
example below.
2010-04-15 18:11:09
to connect with 3.4 now.
--
*From:* Alejandro Guerrieri [mailto:alejandro.guerri...@gmail.com]
*Sent:* Friday, 16 April 2010 4:25 PM
*To:* Andrew Toth
*Cc:* Juan Nin; users@kannel.org
*Subject:* Re: receipted_msg_id in dlr?
Weird, that's exactly what
Try increasing max-pending-submits. Check with the carrier what's the
maximum they allow (they might call it windowing).
Hope it helps.
Alex
On Fri, Apr 9, 2010 at 4:08 PM, Manoj B kannel.ma...@gmail.com wrote:
My operator have allowed me 100+ throughput, still I can push around 15
sms; can
Check the user guide for the throughput parameter. Of course you can't
throttle MO's nor incoming DLR's, the operator will send them at the rate
they please.
Regards,
Alex
On Thu, Apr 8, 2010 at 10:59 PM, Marcelo Aguila rm.agu...@gmail.com wrote:
Hi, guys.
Actually I'm migrating from an
Hmm, I wouldn't throw an opinion about the technologies involved without
really knowing what's really going on infrastructure-wise.
IMHO there's nothing wrong with your setup from a high level perspective. Of
course I can't tell a thing about how it is configured, dimensioned and/or
being used,
You get the dubious benefit of losing your store if the server crashes ;)
However, if you're using ext3 for the store and it grows too big, this is known
to cause io problems which could result into high load. Using a separate ext2
partition for the store is actually a very good idea, though
You can't...
On Fri, Mar 19, 2010 at 6:45 PM, Kidi Kidi kidi...@yahoo.fr wrote:
Hi all,
I want to send sms with udh through my http smsc but my operator don't use
udh parameter.
How can i do to send rich sms like ringtone, wap push, ... (which use udh)
?
Nope, you'll be surprised about some carriers from around the world...
BlackBerry de movistar, allí donde estés está tu oficin@
-Original Message-
From: Nikos Balkanas nbalka...@gmail.com
Date: Fri, 19 Mar 2010 22:08:37
To: alejandro.guerri...@gmail.com; Kidi Kidikidi...@yahoo.fr
Cc:
That means that the smsc has sent an SMPP optional parameter (TLV stands for
Tag, Length, Value) that kannel doesn't recognize.
0x14XX are user TLV's. You can ignore that warning.
If you need to access that value and you're using fairly recent CVS code
(with meta-data support) you can define the
Sadly, Kannel does not support query_sm yet.
On Wed, Mar 17, 2010 at 4:49 PM, Sergio Gabriel Gallegos
isc.sergi...@gmail.com wrote:
Exactly, not necessarily, but the carrier does not support DLR, so I need
to use Query_sm
Exactly, note necessarily, but the carrier doesn't support DLR's , so
? Query_SM can say whatever the
provider wants. You are going to pay that?
BR,
Nikos
- Original Message -
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Sergio Gabriel Gallegos isc.sergi...@gmail.com
*Cc:* users@kannel.org
*Sent:* Wednesday, March 17, 2010 7:02 PM
:12:18
To: Alejandro Guerrierialejandro.guerri...@gmail.com
Cc: users@kannel.org
Subject: Re: How to consulting status of sms via query_sm asynchronous
Alejandro , only need to know if the message was taken. :(
2010/3/17 Alejandro Guerrieri alejandro.guerri...@gmail.com
Well, yes in my own
Carriers in Argentina don't usually connect new companies directly unless
there's a big reason to do so, if you know what I mean ;). You need to get
in touch with aggregators, many of them provide SMPP services.
Regards,
Alex
On Wed, Mar 17, 2010 at 8:21 PM, Mario Chacon the.ma...@gmail.com
No idea about Peru, but again, I'd check if there's any local aggregators
(or the usual global ones like mBlox, Clickatell, etc.) providing service
there. MT traffic is usually easier to get (almost all global aggregators
can terminate on most countries). Getting MO traffic it's another story
Yes, you're out of luck, you need to patch the source code to be able to
parse it.
Regards,
Alex
On Tue, Mar 16, 2010 at 10:18 AM, Drazen Kozic drazen.ko...@asw.eu wrote:
Hi,
We are using Kannel more than two years and we are very satisfied. Now, we
are using version 1.4.1. The
:
Is this problem solved in version 1.4.2?
Alejandro Guerrieri wrote:
Yes, you're out of luck, you need to patch the source code to be able to
parse it.
Regards,
Alex
On Tue, Mar 16, 2010 at 10:18 AM, Drazen Kozic drazen.ko...@asw.eumailto:
drazen.ko...@asw.eu wrote:
Hi,
We
You can achieve similar results without sacrificing performance, by tweaking
the tcp parameters on sysctl as well, for example to recycle the tcp
sockets.
Besides, maybe the application's taking too much time to respond?
Regards,
Alex
On Tue, Mar 2, 2010 at 12:23 PM, Gabor Maros
You need to set the log-level to 0 and look on the smsc's log afterwards.
Regards,
Alex
On Mon, Mar 1, 2010 at 7:25 PM, Jakob Thomsen gede...@cs.au.dk wrote:
Hi Marcelo,
Thanks for your quick reply. I am probably looking in the wrong places but
I haven’t been able to find the PDU in
That's not a kannel problem, but regular Linux sysadmin stuff.
You're getting too many open files, so the system can't open more
files/sockets and your smsbox dies. You need to increase the number of open
files with the ulimit command or by setting it on sysctl.conf
Anyway, I'd also check your
That's old and experimental code I think. I've managed to make it work
time ago, bug was buggy and abandoned soon after. Honestly I don't remember
too well how was it, but found some help by reading the code.
Regards,
Alex
On Mon, Feb 22, 2010 at 4:51 PM, sangprabv sangpr...@gmail.com wrote:
Yes, I'd say so.
Regards,
Alex
On Tue, Feb 23, 2010 at 1:59 AM, sangprabv sangpr...@gmail.com wrote:
Thanks for the reply Alex, so it means it is not recommended to use it in
production environment?
sangprabv
sangpr...@gmail.com
On Feb 22, 2010, at 10:59 PM, Alejandro Guerrieri wrote
RTFM...
On Sun, Feb 21, 2010 at 3:29 PM, LoLoVioLo lolovi...@hotmail.com wrote:
Hi,
I am willing to use the URL report ability in Kannel.
Where can I find a complete list of arguments (i.e. msgid, state, msisdn,
etc) I can use in url path ?
Is there a way to set dlr-mask and dlr-url on a
That's not possible, since the web interface doesn't actually wait for the
message to get accepted to return.
You need to use DLR's for any extra information. Kannel creates a first DLR
when the message is accepted, you could use that to get the internal id
among other useful information.
spend more time on googling then i started posting
questions. I already gone through kannel user guide but there is one example
is there.How to understand other parameters passing through kannel http
admin commands.
Thanks and Regards,
Kiran Reddy
Alejandro Guerrieri wrote:
... and we don't
/add-smsc?password=x
is this correct ?
http://192.168.1.94:13000/remove-smsc?password=xsmsc=reddy is this
correct ?
**
Regards,
Kiran Reddy
Alejandro Guerrieri wrote:
The CVS documentation is on the Download page on Kannel's site.
If you'd REALLY googled a bit, for example kannel
Actually my personal choice is to have 2 partitions: ext2 for kannel's
spool, and ext3 (or whatever journaled fs you prefer) for all the rest.
This has many advantages:
* ext2 is way faster than other fs when dealing with a large number of small
files.
* fs corruption on the ext2 partition
... and we don't need to know which stuff _works_ for you, only the ones
that _doesn't_ work (well, they work, you're just don't using adding the
proper parameters).
Besides, everything's perfectly documented. Don't be lazy and spend some
time googling and reading instead of resending the same
Then you're probably doing something wrong in your configuration or request.
The CVS version you're using supports TLV's for sure.
We can't help you without logs and some examples on what you're doing...
Regards,
Alex
On Wed, Feb 17, 2010 at 3:36 PM, GSM Revolution gsm@gmail.com wrote:
Can I add it to Facebook and Twitter as well? Please please please! :D
On Tue, Feb 16, 2010 at 6:18 PM, seikath seik...@gmail.com wrote:
yep, its nice to have a mailing list in your list of business contacts :)
heh
On 02/16/2010 07:05 PM, Nikos Balkanas wrote:
Just about everyone in the
On SMPP is 0-3, being 0 the lower priority. Don't know on other drivers,
maybe it's different?
Regards,
Alex
On Thu, Feb 11, 2010 at 11:50 AM, Gabor Maros gabor.ma...@erstebank.huwrote:
Hi,
Just one additional thing.
You mentioned that priority is 1-9. I've red again the documentation and
Check the docs, there's a setting to deal with that. You don't need to patch
anything.
On Thu, Feb 11, 2010 at 7:14 PM, preeteesh kakkar
preeteesh.kak...@gmail.com wrote:
Hi Kent,
Thanks a lot for your reply.
Yes you are correct but its opposite of what you said. The message_id from
You're not specifying the smsc-id, but you've filtered the TLV's to only go
thru Unicel1. Try commenting the smsc-id line, or specifying the smsc on
the url.
Also check the logs to see if you find something in there.
Regards,
Alex
On Wed, Feb 3, 2010 at 1:33 PM, GSM Revolution
these configs on 1.4.3 but kannel failed to start. I
need to get the recent copy from CVS. Is there any documentation on this?
Regards.
On Mon, Feb 1, 2010 at 4:01 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
You need to tell kannel about the sar parameters (you need
)
cygxml2-2.dll = /usr/bin/cygxml2-2.dll (0x63dc)
cygz.dll = /usr/bin/cygz.dll (0x692c)
Thanks,
Sindu
--
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Sindu R riss.regis...@yahoo.com
*Cc:* Nikos Balkanas n...@amdtelecom.net; users
You need to tell kannel about the sar parameters (you need to be using a
fairly recent CVS for use this):
group = smpp-tlv
name = sar_ref
tag= 0x020C
type = integer
length = 2
group = smpp-tlv
name = sar_tot
tag= 0x020E
type = integer
length = 1
group = smpp-tlv
name =
checking Kannel version... 1..4.3
checking Kannel libs... -L/usr/local/lib/kannel -lgw -lwap -lgwlib -lrt
-lresolv -lm -lpthread -liconv -L/usr/lib -lxml2 -lz -liconv -lm
-L/usr/local
...
checking Kannel includes... -I/usr/local/include/kannel -g -O2
-D_LARGE_FILES= -I/usr/include/libxml2
xxx.xxx.x.xxx. Libxml version 2.7.4. Compiled with MySQL
5.1.42, using MySQL 5.1.42. Using native malloc.
What else could be wrong?
Thanks,
Sindu
--
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Nikos Balkanas n...@amdtelecom.net
*Cc:* Sindu R
I'm afraid Kannel does't know how to re-assemble based on SAR-* values. Even
if you define the TLV's, the logic to re-assemble is missing. Kannel can
only re-assemble based on UDH values.
Regards,
Alex
On Mon, Jan 18, 2010 at 8:20 PM, Abdulraheem Obaisi aopa...@hotmail.comwrote:
Hi Alex,
I
I think you're misreading the code. The mask values are not passed to the
SMPP driver as-is, but are just a way to tell the driver what to
send/request. In this case, the 0x20 value means that kannel should ask for
intermediate dlrs. This is not necessarily only for SMPP, other drivers
might
You're correct, Kannel cannot set the message mode on a per-message basis.
Tell your provider to send you a couple of tcp dumps with some examples.
Maybe he's referring to another parameter within the smpp pdu's?
Regards,
Alex
On Thu, Jan 14, 2010 at 11:19 AM, Rolandow kan...@rolandow.nl
have any info i'll send it here.
2010/1/13 Alejandro Guerrieri alejandro.guerri...@gmail.com
Some MO's are dropped under heavy traffic.
MT traffic is NOT affected at all.
Not sure about DLR's (didn't experienced myself, but since DLR's and MO's
are fairly similar... maybe)
Regards
the same issues than before, some loss between sqlbox and smsbox.
Anyone is having similar issues?
2009/12/29 Alejandro Guerrieri alejandro.guerri...@gmail.com
Ok, so maybe the problem is related to the way bearerbox and sqlbox
exchange messages. Good to know...
Regards,
Alex
On Tue
or MT or BOTH ?
--
Kenny
w: www.nuObjects.com
Bulk SMS Solutions | Managed Hosting | Enterprise Application Development
On Wed, Jan 13, 2010 at 8:18 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
My patch adds support for meta-data on _all_ DB engines, not only mysql.
Have
Afaik Kannel cannot handle concatenation based on sar parameters, only
UDH-based concatenation.
Regards,
Alex
On Sun, Jan 10, 2010 at 7:48 PM, Abdulraheem Obaisi aopa...@hotmail.comwrote:
Hi,
I have configured TLV optional parameters like what mention in latest
manual and depending on
2010-01-10 23:00:38 [32012] [6] DEBUG:Octet string dump ends.
2010-01-10 23:00:38 [32012] [6] DEBUG: SMPP PDU dump ends.
###
On Sat, Jan 9, 2010 at 1:03 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
Ok, you could try inserting the binary
Ok, you could try inserting the binary code instead of the % encoded data.
Something like CHAR(0x1B, 0x06, 0x01...) etc.
Regards,
Alex
--
Alejandro Guerrieri
aguerri...@kannel.org
On Sat, Jan 9, 2010 at 1:42 AM, Sam nu.e...@gmail.com wrote:
Thanks Alex .. as you would see below.. the problem
How big is the store? Are you using spool with ext3?
If the store spool builds up, ext3 could become a serious performance hog.
I'd recommend you to use a separate ext2 partition for the spool dir, your
performance will improve a lot (specially if you have to restart kannel with
tens/hundreds of
(
'host' = 'localhost',
'port' = 13013,
'user' = 'foo',
'pass' = 'bar'
);
$result = sendwappush ( $fields, $kannel );
print SENTbr$resultbr;
/*
sendwappush function.
Copyleft 2004 by Alejandro Guerrieri
This code is open source and GPL licensed
*/
function
:29 AM, Alejandro Guerrieri wrote:
No, the first release aims to make sqlbox meta-data aware. I don't want to
delay that further.
After that is properly tested and committed, the next release will get the
custom SQL functionality in place.
Regards,
Alex
On Mon, Dec 28, 2009 at 6:21 PM
. Still fine.
Willy
Sent from my Sony Ericsson XPERIA™ X1.
--
From: Alejandro Guerrieri alejandro.guerri...@gmail.com
Sent: 29 December 2009 18:41
To: Willy Mularto sangpr...@gmail.com
Cc: ken.bell...@gmail.com; users@kannel.org; de...@kannel.org
Subject: Re
/11/27 Bruno Aguirre brunoaguirreris...@gmail.com
Ok, thanks a lot!
2009/11/27 Alejandro Guerrieri alejandro.guerri...@gmail.com
My guess is that it's the missing meta-data field support on sqlbox,
but I still need to do some extra tests to confirm.
I've the patch partially ready (missing
/28 Alejandro Guerrieri alejandro.guerri...@gmail.com
I'm working on the patch to support meta-data right now. I'll have a
version for testing during this week for sure, though it'll need testing on
all DB engines.
Regards,
Alex
On Mon, Dec 28, 2009 at 5:51 PM, Bruno Aguirre
I've done a patch for that, check the list archives, I'll probably modify it
in the next few days to rename the parameter, but it's already usable:
http://www.mail-archive.com/de...@kannel.org/msg09581.html
Regards,
Alex
On Mon, Dec 21, 2009 at 12:03 PM, Jinson jin...@mobme.in wrote:
My
into Emerging 50 Companies in India by Nasscom
On Mon, Dec 21, 2009 at 4:57 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
I've done a patch for that, check the list archives, I'll probably modify
it in the next few days to rename the parameter, but it's already usable:
http
-stop-daemon.o] Error 1
Any help please. TIA
Willy
sangpr...@gmail.com
On Dec 17, 2009, at 2:00 PM, Alejandro Guerrieri wrote:
Seems like you're missing the mysql headers. Check if mysql.h is on /
usr/local/mysql/include/mysql or someplace else.
Regards,
Alex
On Thu, Dec 17, 2009 at 2
Did I get it all wrong, or Henri's only trying to send a WAP push to a
phone?
If that's the case, I've made time ago a simple php function you could use:
http://www.blogalex.com/archives/12
There's no need to implement the whole protocol just to send a simple URL.
However if you need more
Seems like you're missing the mysql headers. Check if mysql.h is on
/usr/local/mysql/include/mysql or someplace else.
Regards,
Alex
On Thu, Dec 17, 2009 at 2:25 AM, uYe sangpr...@gmail.com wrote:
Hi,
I'm trying to install kannel with mysql support on Mac Leopard 10.5.8. And
I got these
to find it while the file is
exists
Willy
sangpr...@gmail.com
On Dec 17, 2009, at 2:00 PM, Alejandro Guerrieri wrote:
Seems like you're missing the mysql headers. Check if mysql.h is on
/usr/local/mysql/include/mysql or someplace else.
Regards,
Alex
On Thu, Dec 17, 2009 at 2:25 AM
Enabling dlr-mask and dlr-url will get you the NACK message as a DLR. If
you're using latest CVS you'll get some extra values as meta-data as well.
Regards,
Alex
On Fri, Dec 4, 2009 at 2:35 PM, Kyriacos Sakkas kyria...@netsmart.com.cywrote:
Firstly apologies to all if this is documented
get created when its
NACked, so that something can be returned.
Kyriacos
Alejandro Guerrieri wrote:
Enabling dlr-mask and dlr-url will get you the NACK message as a DLR.
If you're using latest CVS you'll get some extra values as meta-data
as well.
Regards,
Alex
On Fri, Dec
Source address is the shortcode. Check if you're putting the right one on the
from field, otherwise contact the operator, they might have a
misconfiguration.
Regards,
Alex
BlackBerry de movistar, allí donde estés está tu oficin@
-Original Message-
From: Ariful Hossain
http smsc's works from bearerbox I think
2009/12/3 Nikos Balkanas n...@amdtelecom.net
Hi Alex,
Right now all client connections have a set limit of 240 hardwired in
code. It is easy to make this configurable globally, and I think it would be
an improvement over the hardcoded one.
Now,
You need to pass the value on the meta-data field. For example:
meta-data=?smpp?my-custom-var=1
(urlencoded of course)
Regards,
Alex
On Wed, Dec 2, 2009 at 9:01 AM, Elton Hoxha elt...@gmail.com wrote:
Hi guys,
I`m trying to use kannel for sending ussd request and receiving back using
explanations for each hexa code?
Thank You,
Elton
On Wed, Dec 2, 2009 at 11:23 AM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
You need to pass the value on the meta-data field. For example:
meta-data=?smpp?my-custom-var=1
(urlencoded of course)
Regards,
Alex
On Wed
There seems to be an issue with latest CVS'es (with meta-data) and Sqlbox.
I'm working on a fix, but I've been quite busy lately, I hope to be able to
finish it next week.
Regards,
Alex
On Fri, Nov 27, 2009 at 7:11 PM, Bruno Aguirre brunoaguirreris...@gmail.com
wrote:
Hi to all!.
I'm
PM, Bruno Aguirre brunoaguirreris...@gmail.com
wrote:
Ok, is there any way i can help? Perhaps if you have an idea of where is
the issue i can help you in the fix
2009/11/27 Alejandro Guerrieri alejandro.guerri...@gmail.com
There seems to be an issue with latest CVS'es (with meta-data
If you're connecting sqlbox to smsbox, as it appears to be the case, then
you should start smsbox _before_ sqlbox.
Hope it helps,
Alex
On Wed, Nov 25, 2009 at 12:19 PM, jyotiranjan panda tell2jy...@gmail.comwrote:
Hi all,
I am not able to run sqlbox with kannel-1.4.1.
I have made a start
PM, jyotiranjan panda tell2jy...@gmail.comwrote:
Dear Alex,
the same error I am geting, please look into my config if I have to change
anything?
I am connecting as smsbox -- sqlbox bearerbox
Regards
Jyoti
On 11/25/09, Alejandro Guerrieri alejandro.guerri
Please paste the deliver_sm PDU dump. I bet you're not sending the
destination_addr.
Regards,
Alejandro
On Thu, Nov 19, 2009 at 10:18 AM, st2forget st2for...@gmail.com wrote:
Hi all, I'm new Kannel user. I've configure Kannel to bind with SMSC
Simulator via SMPP protocol. The problem is
Check the PDU's, if the concatenation is done by using the sar_* optional
parameters, kannel cannot assemble it. Kannel can only assemble concatenated
messages if concatenation is done using udh.
Regards,
Alejandro
On Mon, Nov 16, 2009 at 4:33 PM, Elton Hoxha elt...@gmail.com wrote:
Hi guys,
split the longs sms using SAR and some others using UDH?
THanks
Elton
On Mon, Nov 16, 2009 at 4:51 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
Check the PDU's, if the concatenation is done by using the sar_* optional
parameters, kannel cannot assemble it. Kannel can only
Maybe it's a TLV? Can you paste your pdu dump?
Regards,
Alejandro
On Tue, Nov 10, 2009 at 5:15 PM, Konstantin Vayner pon...@appcell.netwrote:
Hi list,
One of the smscs (smpp) we are connected to sends a privacy_indicator field
in deliver_sm.
And the operator in question wants our
the telco it guys ;)
Regards,
Konstantin
On Tue, Nov 10, 2009 at 6:44 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
Then you should be able to get it by using the meta-data functionality
then.
You need a more or less recent CVS, though, 1.4.3 and earlier won't cut
mentioned below is that correct ?
If possible can you please give me sample urls like below and sample
configuration.
Regards,
Kiran Reddy
Alejandro Guerrieri wrote:
If not set, the priority used is 0.
Kannel uses an a la Robert Sedgewick algorithm. If no other priorities
are present
could be the cause of this strange effect.
Thanks,
Ayokunle O.
On Fri, Nov 6, 2009 at 6:00 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
If not set, the priority used is 0.
Kannel uses an a la Robert Sedgewick algorithm. If no other priorities
are present, the queue
You need to use accepted-smsc and/or denied-smsc to prevent messages
directed to one smsc to be sent by the other(s).
For example:
group = smsc
name = A
accepted-smsc = A
...
group = smsc
name = B
accepted-smsc = B
...
Check the userguide for more details.
Hope it helps,
Alejandro
On Mon,
?
Regards,
Ayokunle O.
On Mon, Nov 9, 2009 at 12:43 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
That's to be expected in fact, if the queue is caused by retries. New
messages have higher priority than retries.
Regards,
Alejandro
On Mon, Nov 9, 2009 at 12:36 PM, ayokunle
Claudio,
Use the latest CVS snapshot, it's considered as stable as 1.4.3 and it has
the meta-data functionality.
That document is mostly valid (at least for meta-data) it's only lacking the
per-smsc setting, which was added later.
Anyway, you can always download the latest snapshot's userguide
One more thing: do _not_ mix boxes between 1.4.1 and CVS, and be sure you
don't have messages left on the store. The file formats are different.
Regards,
Alejandro
On Mon, Nov 9, 2009 at 10:16 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
Claudio,
Use the latest CVS snapshot
Have you tried googling for it? You'll find your question answered about a
thousand times.
There's a very very well written blog post by Donald Jackson with complete
details. I'm sure you'll figure out the rest.
Regards,
Alejandro
2009/11/3 David G. Navarro Ferrer dgnava...@estudiantes.uci.cu
2782057873 is.
...
2009-10-27 05:09:36 [21789] [12] DEBUG: DLR[internal]: Adding DLR
smsc=hua4, *ts=2782057873*, src=8601661, dst=XXX, mask=7, boxc
...
Regards.
On Thu, Oct 29, 2009 at 12:13 PM, Alejandro Guerrieri
alejandro.guerri...@gmail.com wrote:
Yes, they are correlated, only
:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Latitude Test latitude...@googlemail.com
*Cc:* users users@kannel.org
*Sent:* Friday, October 30, 2009 11:03 AM
*Subject:* Re: how DLR mapping is done internally?
I think it's a leftover from older times where an actual timestamp was used
Yes, they are correlated, only one is decimal and the other hex:
2782057873 == 0xa5d2d591
*
*
*
Kannel has a parameter to match different formats, check the user guide for
the msg-id-type parameter.
Hope it helps,
Alejandro
*
On Thu, Oct 29, 2009 at 11:55 AM, Latitude Test
...@estudiantes.uci.cu
| *To:* Alejandro Guerrieri alejandro.guerri...@gmail.com
| *Cc:* users users@kannel.org
| *Sent:* Wednesday, October 28, 2009 6:14 PM
| *Subject:* Re: kannel + DNS
|
|
| you're right. My question is not whether I can put Kannel within the DNS.
My question is how to bind the Kannel
No it's not related to kannel at all and there's nothing to do in kannel to
point a domain to an IP.
If you're asking this, you need to do your homework about DNS resolution...
Besides, the architecture document, apart from being out of date, it's not
the user guide, which you should be using to
reaching a Web server passes the
DNS to convert my IP address to a URL under a domain. Does anyone know how?
I recommend, so that really does know how Kannel in all its magnitude, the
document architecture.
- Alejandro Guerrieri alejandro.guerri...@gmail.com escribió:
|
No it's not related
.
- Alejandro Guerrieri alejandro.guerri...@gmail.com escribió:
| David,
|
Nobody said it wasn't important. It's just not the right document to learn
how to use Kannel.
|
You evidently ignore how does the DNS protocol works, otherwise you
wouldn't be asking the nonsense questions you're asking
, some other terminal, super user terminal... but it's no
use. Thought that it's because my phone :(. or maybe it's because device
busy or cannot get information of Nokia N70 ME :(
Alejandro Guerrieri wrote:
Have you tried from minicom or any other terminal client?
Regards,
Alejandro
Have you tried from minicom or any other terminal client?
Regards,
Alejandro
On Mon, Oct 26, 2009 at 10:36 AM, sangprabv sangpr...@gmail.com wrote:
If it is about permission then try to be root, it should fix it. If it
does then try to look for any appropriate permission setting ;)
No SSL Support ?
I'm not sure about how would this affect OMA, but you could try recompiling
Kannel with SSL support and see if it helps.
SSL support is compiled by default if you have the proper libraries, check
on the SSL section while running ./configure, you may need to add
was this submitted, and why it didn't make it to the CVS?
BR,
Nikos
- Original Message -
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Nicolas Dagnet ndag...@gmail.com
*Cc:* users@kannel.org
*Sent:* Sunday, October 25, 2009 2:58 AM
*Subject:* Re: Strange behaviour
No, any complaint XML parser should treat a CDATA section as is, without
enforcing XML compliance with the data inside. The goal of CDATA is to be
able to pass data without having to worry for invalid characters, etc. If
you want to ignore something on XML, you should use a !-- comment --.
I also
that people do not branch
off. Can you try resubmitting? Last time I am afraid I was not involved with
SMS and didn't pay much attention to it.
BR,
Nikos
- Original Message -
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Nikos Balkanas nbalka...@gmail.com
*Cc
?
Nikos
- Original Message -
*From:* Alejandro Guerrieri alejandro.guerri...@gmail.com
*To:* Nikos Balkanas nbalka...@gmail.com
*Cc:* users@kannel.org
*Sent:* Sunday, October 25, 2009 12:07 PM
*Subject:* Re: rejection of dlr-url field in CDATA
No, any complaint XML parser should treat
Try sending the UDH as binary data instead, you're sending the text
representation:
smsbox:
2009-10-25 13:16:19 [28320] [6] DEBUG: data: 06 05 04 23 f4 00 00 42 45
47 49 4e 3a 56 43 41 ...#...BEGIN:VCA
sqlbox:
2009-10-25 13:23:26 [28320] [6] DEBUG: data: 25 30 36 25 30 35 25 30 34
25
201 - 300 of 988 matches
Mail list logo
