jsonrpc.Executor/6::DEBUG::2017-01-25
14:19:23,623::lvm::288::Storage.Misc.excCmd::(cmd) FAILED: =
' WARNING: Not using lvmetad because config setting
use_lvmetad=0.\n WARNING: To avoid corruption, rescan devices to make
changes visible (pvscan --cache).\n Volume group "0e4ca0da-1721-4ea7-
92a
Gianluca,
It looks like VM doesn't receive broadcasts. It can be a network topology issue.
Could you double check /sys/class/net/bond1/bonding/mode and
/sys/class/net/bond1/bonding/slaves ?
Is it possible you have another VM with the same MAC address in the same
network segment?
On Thu, 2017-0
On Wed, Jan 25, 2017 at 8:08 PM, Beckman, Daniel
wrote:
> I’ve added this to Bugzilla:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1416533
Thanks!
>
>
> On 1/25/17, 11:02 AM, "users-boun...@ovirt.org on behalf of Beckman, Daniel"
> wrote:
>
> I tested this on a Windows 2012 R2 (x64) Da
On Wed, Jan 25, 2017 at 6:28 PM, Gianluca Cecchi
wrote:
> Hello,
> I'm checking Italian Translation in 4.0.6 and completing it for 4.1 (now at
> 92%).
> Suppose I found an untranslated / bad translated word: what is the best and
> quick way to go to Zanata and find the reference for it and correct
Hi Gianluca,
On 01/25/2017 06:28 PM, Gianluca Cecchi wrote:
Hello,
I'm on 4.0.6 with CentOS 7.3.
The hypervisor is an old blade BL685c G1 and the network adapters used
to provide network to vm are
07:04.0 Ethernet controller: Broadcom Limited NetXtreme BCM5715S Gigabit
Ethernet (rev a3)
07:04.1
Hi Fernando,
On 01/25/2017 03:29 PM, Fernando Fuentes wrote:
For got to add my server log.
http://pastebin.com/9PfASxqM
Could you please share vdsm/engine version too?
Adding Nir for review in vdsm/storage side.
--
Cheers
Douglas
___
Users mailing
Any body? :(
--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org
On Wed, Jan 25, 2017, at 02:29 PM, Fernando Fuentes wrote:
> For got to add my server log.
>
> http://pastebin.com/9PfASxqM
>
> --
> Fernando Fuentes
> ffuen...@txweather.org
> http://www.txweather.org
>
> On We
Hello,
I'm on 4.0.6 with CentOS 7.3.
The hypervisor is an old blade BL685c G1 and the network adapters used to
provide network to vm are
07:04.0 Ethernet controller: Broadcom Limited NetXtreme BCM5715S Gigabit
Ethernet (rev a3)
07:04.1 Ethernet controller: Broadcom Limited NetXtreme BCM5715S Gigabi
Thanks - that did it. I noticed the selinux contexts were all different
for the files/folders created by the RHEV manager. Is it safe to assume
if I use the RHEV manager to move files around that the selinux contexts
will automatically get set to the correct permissions?
On 1/25/2017 3:44 PM,
Hi Guys,
Just wondering if we have an updated manual or whats the current
procedure for upgrading the nodes in a hyperconverged ovirt gluster pool?
Ie Nodes run 4.0 oVirt, as well as GlusterFS, and hosted-engine running
in a gluster storage domain.
Put node in maintenance mode and disable g
Hi Paul,
Run this:
chown 36:36 /var/lib/exports/iso
Try adding it again in RHEV/oVirt manager. When you add it, it will create a
directory structure underneath your NFS share – something like /images/----/, which is where you need to
put the ISO (or VFD for flopp
Il 25/Gen/2017 21:32, "paul.greene.va" ha
scritto:
I'm trying to get an ISO domain configured in a new RHEVM manager. I did
not configure it during the initial ovirt-engine-setup, and am manually
configuring it after the fact.
I created an NFS share in /var/lib/exports/iso and dropped a couple o
I'm trying to get an ISO domain configured in a new RHEVM manager. I did
not configure it during the initial ovirt-engine-setup, and am manually
configuring it after the fact.
I created an NFS share in /var/lib/exports/iso and dropped a couple of
files in there from elsewhere, just for testing
For got to add my server log.
http://pastebin.com/9PfASxqM
--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org
On Wed, Jan 25, 2017, at 02:25 PM, Fernando Fuentes wrote:
> Here a paste bin of my vdsm.log
>
> http://pastebin.com/YKbrpBur
>
> Regards,
>
>
> --
> Fernando Fuen
Here a paste bin of my vdsm.log
http://pastebin.com/YKbrpBur
Regards,
--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org
On Wed, Jan 25, 2017, at 10:19 AM, Fernando Fuentes wrote:
> I am adding a host to my cluster and is failing with:
>
>
> Jan 25, 2017 10:18:02 AM
>
Hello,
sometimes it happens that I open a spice console from a browser that
actually is itself inside a VM and connected through a spice console
session.
So Shift+F12 doesn't work at all and to exit from this inner console I have
to shutdown the VM so I loose the focus and I regain it inside the fi
We prefer Ceph too and we've got our ovirt instance configured in two
different ways.
1. Openstack Cinder, each VM's disk will have a single volume in ceph with
all volumes being under the same pool.
2. Export an RBD via NFS from a gateway machine, this can be a trivially
small physical or virtual
Hi,
I want to use Ceph with oVirt in some non standard way. The main idea is to
map rbd volume to all computes and to get the same block device, say
/dev/foo/bar, across all nodes, and then use "POSIX compliant file systems"
option to add Storage Domain.
Am I crazy? If not, what should I do next:
I’ve added this to Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1416533
On 1/25/17, 11:02 AM, "users-boun...@ovirt.org on behalf of Beckman, Daniel"
wrote:
I tested this on a Windows 2012 R2 (x64) DataCenter VM, newly built, on
oVirt 4.0.5.
It suffers from the same bug
Hello,
When you create/modify a vm, the memory definition still has to be defined
in megabytes..
Can we switch to GB, or change the input workflow so that there is a field
for the number itself and a list of values box to choose between GB, MB
(and perhaps TB in the future or already now)
Thanks,
G
I tested this on a Windows 2012 R2 (x64) DataCenter VM, newly built, on
oVirt 4.0.5.
It suffers from the same bug that’s been present since at least oVirt 3.6:
The Balloon service is setup with the wrong path:
C:\Program Files (x86)\oVirt Guest
Tools\drivers\Balloon\w2k12
Is the documentation described here up 2 date for 4.0.6 and/or 4.1?
https://www.ovirt.org/develop/release-management/features/storage/sharedrawdisk/
Is live migration possible for a vm with shared disks?
The disks seem to be only raw.. does this mean that if I edit a qcow2 disk
and make it shared i
I'm running a cluster of oVIRT on 4.0.6 and we are using purely NFS storage
for ISO/EXPORT/DATA domain. We are using a Tintri NFS appliance. What I
can't seem to figure out is when I go to create a Pool from a template it
fails. I have tried to export the template to export domain, then delete
the
I tested this on a Windows 2012 R2 (x64) DataCenter VM, newly built, on oVirt
4.0.5.
It suffers from the same bug that’s been present since at least oVirt 3.6: The
Balloon service is setup with the wrong path:
C:\Program Files (x86)\oVirt Guest
Tools\drivers\Balloon\w2k12R2\amd64\blnsvr.exe"
Hello,
there are some alerts that are automatically hidden (such as when I
configure Power mgmt, the previous related alert go away), but not all.
where to find info about their mgmt?
I don't see anything special in "Introduction to Administration Portal" in
RHEV 4.0 docs. Only that it is named "
Hello,
I'm checking Italian Translation in 4.0.6 and completing it for 4.1 (now at
92%).
Suppose I found an untranslated / bad translated word: what is the best and
quick way to go to Zanata and find the reference for it and correct?
For example in 4.0.6 I'm in dashboard and at bottom I have the th
I am adding a host to my cluster and is failing with:
Jan 25, 2017 10:18:02 AM
Failed to connect Host gigantes to Storage Pool HyperVirtDC
Jan 25, 2017 10:18:01 AM
Host gigantes cannot access the Storage Domain(s) attached to
the Data Center H
Hi Martin,
Good to see and thanks for pointing out! Looking forward to 4.1!
Cheers,
Matt
2017-01-25 13:21 GMT+01:00 Martin Perina :
> Hi Matt,
>
> please take a look at [1] which is included in upcoming oVirt 4.1.
>
> Regards
>
> Martin Perina
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?i
Hi Shirly,
OK, great! thanks for the clearification!
This might be updated and made more clear in the docs.
Thanks!
Matt
2017-01-25 14:41 GMT+01:00 Shirly Radco :
> Please see at the to of this section:
> "The following is a list of options for configuring application settings for
> the Data W
Please see at the to of this section:
"The following is a list of options for configuring application settings
for the Data Warehouse service. These options are available in the
/usr/share/ovirt-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf
file. *Configure any changes to the defaul
Hi Matt,
please take a look at [1] which is included in upcoming oVirt 4.1.
Regards
Martin Perina
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1145240
On Wed, Jan 25, 2017 at 1:11 PM, Matt . wrote:
> is there a way to disable powerchecks for specific servers/clusters
> when powermanageme
is there a way to disable powerchecks for specific servers/clusters
when powermanagement is not configured for a host? the alerts are
filling because of it and it's unneeded.
Would be nice to know.
Thanks!
___
Users mailing list
Users@ovirt.org
http://l
Didi,
For example, BZ#1389251. It doesn’t look very serious. Actually “User is not
able to edit her profile” is a side effect. Since users logged in by LDAP group
permissions just did not have accounts in the engine, users did lose their
access to created VMs after logout. This was a showstoppe
Hi All,
vdsClient will be removed from master branch today.
It is using XMLRPC protocol which has been deprecated and replaced by
JSON-RPC.
A new client for vdsm was introduced in 4.1: vdsm-client.
This is a simple client that uses JSON-RPC protocol which was introduced in
ovirt 3.5.
The client
Tested and working nice on my setup (Ovirt 4.0.5).
Thanks!
AG
-Original Message-
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Juan Hernández
Sent: Tuesday, January 24, 2017 3:41 PM
To: emanuel.santosvar...@mahle.com; users@ovirt.org
Subject: Re: [ovirt-users
Hi Shirly,
The reason why I ask is because the explanation here:
https://access.redhat.com/documentation/en/red-hat-virtualization/4.0/single/data-warehouse-guide/#Application_Settings_for_the_Data_Warehouse_service_in_ovirt-engine-dwhd.conf
2017-01-24 10:49 GMT+01:00 Shirly Radco :
> Hi,
>
> W
Hi,
This has been fixed with using vnc and connecting on the right port.
Do you need more info ?
Thanks,
Matt
2017-01-25 11:20 GMT+01:00 Simone Tiraboschi :
>
>
> On Wed, Jan 25, 2017 at 4:51 AM, Matt . wrote:
>>
>> Oops, I was connecting using Spice and needed VNC. Maybe it's nice to
>> put
Hime Simone,
As discussed on IRC, it's fixed (like this).
I wil create the discussed ticket for the option later this day.
Thanks!
Matt
2017-01-25 11:26 GMT+01:00 Simone Tiraboschi :
>
>
> On Wed, Jan 25, 2017 at 5:28 AM, Matt . wrote:
>>
>> I'm trying to resume a pause started HostedEngine b
On Wed, Jan 25, 2017 at 5:28 AM, Matt . wrote:
> I'm trying to resume a pause started HostedEngine but I'm failing and
> I see lots of topics about some option --vm-resume being needed.
>
> "virsh resume HostedEngine" asks me for a username which is not set,
> so I'm wondering how to get this wor
On Wed, Jan 25, 2017 at 4:51 AM, Matt . wrote:
> Oops, I was connecting using Spice and needed VNC. Maybe it's nice to
> put this in the output or the help for the console command.
>
The console commands now directly points to the serial console and it's
intended to bu run on the host where the
Hello,
just for the record, I have reported this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1416300
Regards
Jan
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On Wed, Jan 25, 2017 at 10:38 AM, Gianluca Cecchi
wrote:
> On Wed, Jan 25, 2017 at 8:00 AM, Yedidyah Bar David wrote:
>>
>>
>>
>> An updated Windows Guest Tools ISO is now available as well, from:
>>
>>
>> http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/oVirt-toolsSetup/4.1-1.fc24/
>
>
> Is it m
On Wed, Jan 25, 2017 at 8:00 AM, Yedidyah Bar David wrote:
>
>
> An updated Windows Guest Tools ISO is now available as well, from:
>
> http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/oVirt-
> toolsSetup/4.1-1.fc24/
Is it meant to be used also in 4.0.x environments?
___
Hi,
where would I have to add this:
I mean which file or is it somewhere in the config ?
I found something that sounds like it would do the same. What do you think
about that ?
http://www.jieyung.com/en/faq.asp?newsclassid=377&newsid=508
It's written for 3.5 and does some
44 matches
Mail list logo