]
On Thu, Jan 24, 2019 at 10:25 AM Alex K wrote:
> When I get the error the engine.log logs the attached engine-partial.log.
> At vdsm.log at SPM host I don't see any error generated.
> Full logs also attached.
>
> Thanx,
> Alex
>
>
>
>
> On Wed, Jan 23, 20
gt; oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/DDZXH5UG6QEH76A5EO4STZ4YV7RIQQ2I/
>
--
Elad Ben Aharon
ASSOCIATE MANAGER, RHV storage QE
__
t/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YI6NJXQSBM3WESMHHP2LXOBLCEKJ4P6B/
>
--
Elad Ben Aharon
ASSOCIATE MANAGER, RHV storage QE
___
Users mailing list -- users@ovirt.org
To unsub
Hi,
The volume group will be removed only if you specify format domain data to
true (mark the format check box in storage domain removal prompt).
On Wed, Oct 10, 2018 at 10:14 AM, Luca 'remix_tj' Lorenzetto <
lorenzetto.l...@gmail.com> wrote:
> Hi,
>
> i don't know, is a right question anyway.
>
Please make sure you have vdsm-hook-nestedvt installed on your hypervisor
On Thu, Oct 4, 2018 at 1:10 PM, wrote:
> Dear Team,
>
>
>
> Need help to enable nested virtualization in Ovirt VM’s.
>
>
>
> As when I checked my cpu info and kvm acceleration info, it is giving
> below output.
>
>
>
> *#
As a workaround, you can re-initialize the data center from an unattached
domain:
https://access.redhat.com/documentation/en-us/red_hat_
virtualization/4.2/html/administration_guide/sect-data_center_tasks#Re-
initializing_a_Data_Center
On Thu, Oct 4, 2018 at 8:46 AM, Vincent Royer wrote:
> I was
During detach, have you by any chance marked the format domain checkbox?
If not, what is the storage domain status in the fresh 4.2 ovirt instance?
On Wed, Oct 3, 2018 at 6:53 PM, Nathanaël Blanchet wrote:
> Hello,
>
> I detached an existing iso domain from an other ovirt instance and
> attached
gt; another question, what are the advantages and disadvantages between
> direct lun and vHBA?
> Thanks.
>
>
>
> --
> yours Adam
>
>
> *From:* Elad Ben Aharon
> *Date:* 2018-09-13 17:09
> *To:* adam...@adagene.com.cn
> *CC:* ovirtlist
> *
Hi Adam,
It is possible, follow
https://bugzilla.redhat.com/show_bug.cgi?id=431454#c97
On Thu, Sep 13, 2018 at 11:26 AM, adam...@adagene.com.cn <
adam...@adagene.com.cn> wrote:
> Hi, everyone. Is it possible to create a vHBA for a vm in ovirt cluster ?
> I once created a vHBA for a vm when I was
Hi,
I believe the EMC VNX iSCSI and NFS traffic are not on the same network
interface.
I'd check the bottleneck between the hypervisor and the storage, you can
use 'iperf' [1] for that.
And also, try to check the connectivity to the VNX's NFS ports while the VM
is paused while loading data on the
Hi,
This behavior is by design.
For the iSCSI multipathing sub tab to appear, the data center should have
an iSCSI domain attached.
Thanks,
Elad Ben Aharon
RHV QE
On Mon, Aug 13, 2018 at 5:54 PM, wrote:
> Hello.
>
> We have 6 servers in our cluster, which use 2 storage thro
We've opened a bug for that -
https://bugzilla.redhat.com/show_bug.cgi?id=1613282
On Sun, Aug 5, 2018 at 9:51 AM, Raz Tamir wrote:
>
>
> On Sun, Aug 5, 2018 at 9:47 AM, Punaatua PK wrote:
>
>> Hello Raz,
>>
>> yes i saw this bug. But the problem doesn't seem to be the same. I search
>> on googl
Can you please attach engine.log and vdsm.log?
On Tue, Jun 19, 2018 at 6:58 PM, Albl, Oliver
wrote:
> Hi all,
>
>
>
> does anybody have an idea how to address this? There is also a side
> effect that I cannot change SPM (“Error while executing action: Cannot
> force select SPM. The Storage Poo
Jan 31, 2018 at 2:00 PM, Gianluca Cecchi
wrote:
> On Wed, Jan 31, 2018 at 12:33 PM, Elad Ben Aharon
> wrote:
>
>> You can correlate according to /rhev/data-center/%spuuid%/%sd
>> uuid%/images/
>> The image id you can take from:
>>
>> # lvs -o name,tags |l
-d237-4940-a02d-90bb90b1d45a,MD_5,PU_----
On Tue, Jan 30, 2018 at 5:58 PM, Gianluca Cecchi
wrote:
> On Tue, Jan 30, 2018 at 4:51 PM, Elad Ben Aharon
> wrote:
>
>> Please try:
>>
>> vdsClient -s 0 teardownImage
>>
>
&g
Please try:
vdsClient -s 0 teardownImage
On Tue, Jan 30, 2018 at 5:36 PM, Gianluca Cecchi
wrote:
> On Tue, Jan 30, 2018 at 4:29 PM, Elad Ben Aharon
> wrote:
>
>> Try to deactivate this LV:
>>
>> lvchange -an /dev/f7b481c8-b744-43d4-9faa-0e494a308490/6d23ec3e-79fb
Try to deactivate this LV:
lvchange -an
/dev/f7b481c8-b744-43d4-9faa-0e494a308490/6d23ec3e-79fb-47f0-85ff-08480476ea68
On Tue, Jan 30, 2018 at 5:25 PM, Gianluca Cecchi
wrote:
> On Tue, Jan 30, 2018 at 3:14 PM, Elad Ben Aharon
> wrote:
>
>> In a case of disk migration failure w
In a case of disk migration failure with leftover LV on the destination
domain, lvremove is what needed. Also, make sure to remove the image
directory on the destination domain (located under
/rhev/data-center/%spuuid%/%sduuid%/images/)
On Mon, Jan 29, 2018 at 5:25 PM, Gianluca Cecchi
wrote:
> H
Hi,
The storage where 'ISO' storage domain resides has to be reachable for the
engine server. Please check network connectivity between the two.
On Wed, Oct 18, 2017 at 7:41 PM, Alex K wrote:
> Hi all,
>
> I have setup a self hosted setup with 3 servers with several volumes in
> replica 3.
> Th
Hi,
Please make sure that the hosts can reach the iSCSI targets on your Dell
storage using the NICs that are being used by the 2 networks dedicated for
iSCSI.
You can try check it using 'ping -I '.
Thanks,
ELAD BEN AHARON
SENIOR QUALITY ENGINEER
Red Hat Israel Ltd. <https://w
ch
and activate it in the shared data center and register its VMs.
Thanks,
ELAD BEN AHARON
SENIOR QUALITY ENGINEER
Red Hat Israel Ltd. <https://www.redhat.com/>
34 Jerusalem Road, Building A, 1st floor
Ra'anana, Israel 4350109
ebena...@redhat.comT: +972-9-7692007/8272007
In which state was the domain before it got destroyed? If it was in
maintenance state and your oVirt version is higher than 4.0, the VMs
configuration files (ovf) are saved on the domain upon its movement to
maintenance.
Hence, in case it went through a graceful maintenance procedure, all
configura
Hi,
Can you please describe the full flow?
On which oVirt release the old domains were created?
Elad
On Mon, Jun 26, 2017 at 7:11 AM, Ben De Luca wrote:
> Hey,
> So, our DR plans included the idea of importing old domains. Is that
> meant to work now?
>
> -ben
> *very tired sysadmin*
>
e caused the failure. BZ to you sir and good day.
>
> Thank you
>
>
>
> On 06/25/2017 06:54 PM, Elad Ben Aharon wrote:
>
> Hi,
>
> Which types of storage do you have in the data center?
>
> In case it's a block based storage (iSCSI/FC), check that the devic
Can you please provide engine.log and vdsm.log?
On Sun, Jun 25, 2017 at 2:29 PM, JC Clark wrote:
> Mr. Aharon,
>
> One question comes to mind, if the mounts don't mount to the rhev... mount
> point, what is the easiest way to rectify that problem?
>
>
>
> On 06/25/2
Hi,
Which types of storage do you have in the data center?
In case it's a block based storage (iSCSI/FC), check that the devices
(LUNs) where you domains reside are accessible though multipath and LVM:
# multipath -ll
# pvs
# vgs
In case it's a file based storage (NFS/GlusterFS), check that the
Hi,
Answer inline
On Thu, Jun 8, 2017 at 1:07 PM, Stefano Bovina wrote:
> Hi,
> does a storage best practise document for oVirt exist?
>
>
> Some examples:
>
> oVirt allows to extend an existing storage domain: Is it better to keep a
> 1:1 relation between LUN and oVirt storage domain?
>
What do
Hi,
In order to create a new ISO domain or import an existing one to a data
center, you need the data center to have at least one active storage domain
of type data.
On Tue, May 2, 2017 at 5:13 PM, Langley, Robert
wrote:
> I went to add my ISO domain as the first storage domain. It got created
Hi,
Please provide the logs
On Thu, Apr 27, 2017 at 2:12 PM, Endre Karlson
wrote:
> I have a existing NFS storage domain I would like to import.
>
> I add the Name attribute and set the path and hit Enter but it gives me
> "Error while executing actions Attach Storage Domain: Internal Engine
>
Answer inline
On Wed, Apr 5, 2017 at 1:09 AM, Gianluca Cecchi
wrote:
> On Tue, Apr 4, 2017 at 11:49 PM, Elad Ben Aharon
> wrote:
>
>> Hi Gianluca,
>>
>> If you don't have a copy of the template disk on ST2 it means that the
>> VMs were created as deep
Hi Gianluca,
If you don't have a copy of the template disk on ST2 it means that the VMs
were created as deep copy from the template (i.e, they are independent -
you can check it in the the 'general' VM sub-tab).
If this is the case then you won't have any problem with detaching ST2.
On Tue, Apr
Hi,
You're raising a very interesting issue here.
- Is the best way to do it is to create a route between the the two subnets?
You do have to configure routing between the engine and the server where
the ISO domain resides.
PS : For iSCSI ISO domain, I don't know how it will be done, I didn't tr
Please check with 'lsblk' on the VM if you see the new size.
On Thu, Mar 2, 2017 at 11:01 AM, Arman Khalatyan wrote:
> did you check this:
> http://www.ovirt.org/develop/release-management/features/
> storage/lun-resize/
> I had similar trouble but after rebooting host or restarting vdsmd the
>
Hi,
Please provide engine.log (/var/log/ovirt-engine/engine.log).
Also, please execute the following command in engine and provide its output:
# su - postgres -c "psql -U postgres engine -c 'select * from vds;'" |
less -S
Thanks,
Elad
On Sat, Jan 14, 2017 at 1:10 AM, Jeramy Johnson
wrote:
etSpmStatus `vdsClient -s 0
> getConnectedStoragePoolsList`
> spmId = 1
> spmStatus = SPM
> spmLver = 8
>
> [root@virt01-int ~]# vdsClient -s 0 getAllTasks
>
> [root@virt01-int ~]#
>
>
> thanks for your time,
> JP
>
> 2016-12-20 12:55 GMT-03:
ards,
> JP
>
>
>
> 2016-12-20 12:32 GMT-03:00 Elad Ben Aharon :
>
>> Hi,
>>
>> Did you check for running tasks in the SPM host?
>>
>>
>>
>> On Tue, Dec 20, 2016 at 5:04 PM, Juan Pablo
>> wrote:
>>
>>> Hi,
>>>
Hi,
Did you check for running tasks in the SPM host?
On Tue, Dec 20, 2016 at 5:04 PM, Juan Pablo
wrote:
> Hi,
> first of all , thanks to all the Ovirt/Rhev team for the outstanding work!
>
> we are having a small issue with Ovirt 4.0.5 after testing a full end of
> year infrastructure shutdow
Hi, can you please provide engine.log?
On Mon, Dec 19, 2016 at 5:06 PM, Pat Riehecky wrote:
> Last Friday I started a job to add 1 new disk to each of 4 VMs - total of
> 4 disks each 100G.
>
> It seems to still be running, but no host shows an obvious IO load.
> State is
>
> Adding Disk (hour gl
You can destroy the domain. It will remove the domain and its disks from
the engine DB.
Right click on the relevant domain which is in 'maintenance' -> 'Destroy'
On Wed, Dec 14, 2016 at 10:29 AM, Gary Pedretty wrote:
> How do you remove a data storage domain, that is not the primary data
> domai
f this is by design (so that users should look elsewhere). I
> > can still try to run the delete from the 'Edit' page, and capture
> > browser console output. Otherwise, apologies for troubling you with
> > this.
> >
> > Kind regards,
> >
> > Ca
e:
> Hi Eled,
>
> I've attached the ui log and the engine log but I'm not sure what the
> browser console log is - there is a 'console.log' in
> /var/log/ovirt-engine,
> but it is zero size (do I have to turn up debugging perhaps?).
>
> Kind regards,
&g
Hi,
Please attach browser console log and engine.log
Thanks
On Fri, Dec 9, 2016 at 8:04 PM, cmc wrote:
> Just another note on this: I now get a UI exception every time I try
> to provision a disk, although it does succeed so. I'm guessing
> something else is going on, but there is no error in
Can you please attach engine.log?
Thanks
On Mon, Nov 14, 2016 at 6:28 PM, Martijn Grendelman <
martijn.grendel...@isaac.nl> wrote:
> 2016-11-14 17:24:27,980 ERROR
> [org.ovirt.engine.core.bll.exportimport.ImportVmCommand]
> (org.ovirt.thread.pool-8-thread-39) [4a0b828a] Exception:
> java.lang.ref
Did you attach a virtio / virtio-scsi driver to the VM?
If not, you can find them located under /usr/share/virtio-win/ in the
engine, you can upload them to an ISO domain using 'engine-iso-uploader'.
On Sat, Nov 12, 2016 at 12:03 PM, Raian Nasrulla wrote:
>
>
>
> *Hi,I am using ovirt 4.0 *
>
>
By design, host local storage is accessible from the host itself only and
that's why it cannot be used in shared storage Data Centres.
On Thu, Oct 27, 2016 at 9:59 AM, Sebastian Greco
wrote:
> Hi,
>
> Is there a technical reason for not being able to use the local host
> storage if that host is
to move unable to see the newly added iSCSI
> storage domain, any configs do I need to do ?
>
> On Mon, Sep 26, 2016 at 4:46 PM, Elad Ben Aharon
> wrote:
>
>> If you are trying to move the disk to another domain, you should do it
>> via the 'Move' button and not
nks,
> Nagaraju
>
>
> On Mon, Sep 26, 2016 at 4:11 PM, Elad Ben Aharon
> wrote:
>
>> Hi,
>>
>> Disk profile is not copied along with the virtual disk as part of disk
>> migration between storage domains.
>> You can create another disk profile in the t
Hi,
Disk profile is not copied along with the virtual disk as part of disk
migration between storage domains.
You can create another disk profile in the target storage domain, which is
similar to source domain disk profile.
Elad
On Mon, Sep 26, 2016 at 12:51 PM, Budur Nagaraju wrote:
> HI
>
>
Have you configured the quota to 'Enforced'?
On Fri, Sep 23, 2016 at 12:15 PM, Budur Nagaraju wrote:
> Hi
>
> I have storage of 2TB lun and only 90 GB is free ,when I set a qouta
> limit to 1800GB , it showing the 300GB available free space , any configs
> am missing ?
>
> Thanks,
> Nagaraju
Hi,
It looks like you've been trying to configure the iSCSI bond with a network
which was configured as 'required'. This is not allowed by design. Please
do the following:
Navigate to 'Networks' tab, pick the storage network, navigate to the
'Clusters' sub-tab and click on 'Manage Networks' and un
;
> Thanks & Regards,
>
>
> Anantha Raghava eXza Technology Consulting & Services
> On Thursday 25 August 2016 01:02 PM, Elad Ben Aharon wrote:
>
> Thanks.
>
> vdsm.log had been rotated since, it's too new and doesn't have the
> relevant information.
> Fro
va <
rag...@exzatechconsulting.com> wrote:
> Hi,
>
> Yes, this is the first domain in DC. Please find the log files attached.
> vdsm.log is 7.2MB in size. Hence sending it as zip file.
>
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava eXza Technology Cons
Is this the first domain in the DC?
If so, it sounds like you hit
https://bugzilla.redhat.com/show_bug.cgi?id=1359788.
Also, please provide engine.log and vdsm.log
Thanks
On Wed, Aug 24, 2016 at 8:11 PM, Anantha Raghava <
rag...@exzatechconsulting.com> wrote:
> Hi,
>
> Trying to add iSCSI stora
Thanks.
You're getting an iSCSI connection timeout [1], [2]. It means the host
cannot connect to the targets from iface: enp9s0f1 nor iface: enp9s0f0.
This causes the host to loose its connection to the storage and also, the
connection to the engine becomes inactive. Therefore, the host changes i
ond0.32@bond0: mtu 1500 qdisc
>> noqueue master ADMIN state UP
>> link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff
>> 17: ADMIN: mtu 1500 qdisc noqueue
>> state UP
>> link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff
>> 20: bond0.24@bond0: mtu 15
I don't think it's necessary.
Please provide the host's routing table and interfaces list ('ip a' or
ifconfing) while it's configured with the bond.
Thanks
On Tue, Aug 16, 2016 at 4:39 PM, Uwe Laverenz wrote:
> Hi Elad,
>
> Am 16.08.2016 um 10:52 schr
Please be sure that ovirtmgmt is not part of the iSCSI bond.
It does seem to have a conflict between default and enp9s0f0 / enp9s0f1.
Try to put the host in maintenance and then delete the iscsi nodes using
'iscsiadm -m node -o delete'. Then activate the host.
Thanks,
Elad
___
SCSI sessions will
be refreshed with the new connection specifications.
Please let me know if it works for you.
Elad
On Tue, Aug 16, 2016 at 9:26 AM, Uwe Laverenz wrote:
> Hi,
>
> Am 15.08.2016 um 16:53 schrieb Elad Ben Aharon:
>
> Is the iSCSI domain that supposed to be connected
Hi,
Is the iSCSI domain that supposed to be connected through the bond the
current master domain?
Also, can you please provide the output of 'iscsiadm -m session -P3' ?
Thanks
On Mon, Aug 15, 2016 at 4:31 PM, Uwe Laverenz wrote:
> Hi all,
>
> I'd like to test iSCSI multipathing with OVirt
As Yaniv suggested, the Gluster Hyper-Converged solution [1] will give you
the ability to have all hosts access the storage.
[1]
http://www.ovirt.org/develop/release-management/features/engine/self-hosted-engine-hyper-converged-gluster-support/
On Sun, Aug 14, 2016 at 1:52 PM, Elad Ben Aharon
Hi Michael,
You can create a local storage domain using the host's local storage drive.
But, by design, local Data-Centers can have only a single host (i.e, you
can't have other hosts using this storage).
For local storage deployment, first create a directory on the file system
of the host's loca
What's the VM status when you try to activate the disk?
On Mon, Jul 25, 2016 at 4:23 PM, Barak Korren wrote:
> On 25 July 2016 at 16:13, Yaniv Kaul wrote:
> > After successfully attaching a disk and verifying its status is in 'ok',
> > I've tried:
> > api.vms.get(VM0_NAME).disks.get(DISK1_NAME)
Hi,
Can you please provide the logs from the time of the upgrade (engine and
vdsm)?
On Thu, Apr 21, 2016 at 5:22 PM, Dobó László wrote:
> Hi,
>
> I just upgraded from 3.6.3 to 3.6.5, but the hosted engine vm still not
> visible in vms list.
> Its running on iscsi storage domain. The hosted_stora
2
> Via Ruggero Bonghi, 11/B – 00184 Roma
>
> giuseppe.berell...@ptvgroup.com
> www.sistemaits.com
>
> facebook.com/sistemaits <https://www.facebook.com/sistemaits>
> linkedin.com/SISTeMA
> <https://www.linkedin.com/company/sistema-soluzioni-per-l-ingeg
>
> *Da:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *Per conto
> di *Giuseppe Berellini
> *Inviato:* mercoledì 10 febbraio 2016 14:18
> *A:* Elad Ben Aharon
> *Cc:* users@ovirt.org
> *Oggetto:* [ovirt-users] R: Problem installing oVirt 3.6.3-rc with
> GlusterFS over In
gt;
> - The storage domain for oVirt Engine is not listed in the storage tab
>
> - the hosted engine not in the Virtual Machines tab
>
>
>
> Is it OK? What should I do now?
>
>
>
> Thanks for your support!
>
> Giuseppe
>
>
>
>
>
> --
>
;
> PTV SISTeMA
>
> Phone +39 06 993 444 15
> Mobile +39 349 3241969
> Fax +39 06 993 348 72
> Via Ruggero Bonghi, 11/B – 00184 Roma
>
> giuseppe.berell...@ptvgroup.com
> www.sistemaits.com
>
> facebook.com/sistemaits <https://www.facebook.com/sistemaits>
> linkedin.c
Hi,
A new behaviour has been introduced for hosted-engine in 3.6.3 that
involves an automatic import of the hosted-engine storage domain. This auto
import will take place along with first DC initialization (first storage
pool creation).
That means that once a first data domain is created in the se
not how the
> LUNs would be called.
>
> Does that look like it would work?
>
> Thanks
>
>
> On Thu, Feb 4, 2016 at 5:20 PM, Elad Ben Aharon
> wrote:
>
>> Hi,
>>
>> oVirt allows such operations using this feature [1].
>> Basically, while the sto
Hi,
oVirt allows such operations using this feature [1].
Basically, while the storage domain is deactivated (maintenance status),
you'll have to replicate all the data to the fourth LUN (from the storage
server side), replace the storage connections of this storage domain from
RHEVM REST API (expl
ange the config for the HE in
> /etc/ovirt-hosted-engine/hosted-engine.conf so how should that look like?
> There is only one variable for storage and since there is dual pathing
> there is 2 ip:s so is there some other config for multipathing?
>
> storage=x.x.x.x
>
> 2016-02-03 13
ntenance
> and restart it?
> If that is possible then it is ok for me?
>
> /Christian
>
> 2016-02-03 11:07 GMT+01:00 Elad Ben Aharon :
>
>> Hi,
>>
>> Deployment over more than one path is currently not supported. There is a
>> request for it: https://bugzill
Hi,
Deployment over more than one path is currently not supported. There is a
request for it: https://bugzilla.redhat.com/show_bug.cgi?id=1193961
I can't think of a way for manually change to dual paths and keep the VM
running without interruptions.
Adding Simone and Nir who might have an idea.
Hi,
Did you try to import the data domain as an existing one to the DC [1]?
[1] http://www.ovirt.org/Features/ImportStorageDomain
On Tue, Feb 2, 2016 at 3:25 PM, Charles Kozler wrote:
> Say I have backed up a storage domain to another NFS. I now want to
> restore that backup. What would be the
Hi Willard,
It shouldn't be a problem if you have the Gluster volume mounted on your
hosts. Hosted-engine deployment should not be affected.
Thanks,
Elad
On Thu, Oct 22, 2015 at 9:51 PM, Willard Dennis
wrote:
> Hi all,
>
> Back to trying out the latest oVirt with latest Gluster, and wanting to
Hi Jiri,
Is the image located under the same storage pool the host is currently
connected to?
You can check the current connected storage pool by the following:
# vdsClient -s 0 getConnectedStoragePoolsList
On Fri, Oct 9, 2015 at 12:45 PM, Jiří Sléžka wrote:
> Hello,
>
> I have some orphaned im
Hi Christopher,
Thanks for raising the issue. It sounds like the issue you are referring to
is related to the fix of https://bugzilla.redhat.com/show_bug.cgi?id=1261996
.
Adding some more people who should be involved.
On Sun, Oct 11, 2015 at 10:49 AM, Elad Ben Aharon
wrote:
> Hi Christop
Seems like an issue with the configuration image saved on the shared
storage. Simone, can you take a look?
Thanks
2015-08-28 17:18:30 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.heconf
heconflib.create_heconfimage:230 stderr: dd: failed to open
‘/rhev/data-center/mnt/lich**FILTERED**:_
Hi Will,
Which oVirt version are you using? (rpm -q ovirt-engine)
Is the GlusterFS storage domain the master?
Also, please provide:
- /var/log/ovirt-engine/engine.log
- /var/log/vdsm/vdsm.log from both nodes
- /var/log/gluster/*
And the output of 'rpm -q glusterfs' from both hosts.
Tha
Hi,
It might occur because the VM you're trying to import has attached disks that
reside on several storage domains which part of them are not in the
environment.
- Original Message -
From: "Tang Jackson"
To: users@ovirt.org
Cc: "Shigekuni Kazuhiro"
Sent: Wednesday, June 10, 201
Hi Marcelo,
In order to help I will need you to provide the following:
- /var/log/ovirt-engine/engine.log from the ovirt-engine server
- /var/log/vdsm/vdsm.log from the host(s).
Both from the time of the failure.
Thanks
- Original Message -
From: "Marcelo Donato"
To: users@ovirt
Also, can you please describe the exact scenario?
- Original Message -
From: "Elad Ben Aharon"
To: "VONDRA Alain"
Cc: users@ovirt.org
Sent: Wednesday, 1 April, 2015 11:44:01 AM
Subject: Re: [ovirt-users] Storage domain not in pool issue
Can you please try
Can you please try to detach them from the current DC? If it will work, please
try to re-attach them to the desired DC and to activate them.
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon"
Cc: "Adam Litke" , users@ovirt.org, "Al
Were these domains attached to another DC previously?
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon" , "Adam Litke"
Cc: users@ovirt.org, "Allon Mureinik"
Sent: Wednesday, 1 April, 2015 10:52:19 AM
Subject: RE: [ovirt-user
Hi Adam,
Can you please take a look? By the provided information, there seems to be an
issue of synchronization failure between engine and vdsm regarding the storage
pool which the 2 domains are attached to.
Thanks
- Original Message -
From: "VONDRA Alain"
To: "
Please attach /var/log/ovirt-engine/engine.log from engine and
/var/log/vdsm/vdsm.log from the host(s).
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon" , "Idan Shaby"
Cc: users@ovirt.org
Sent: Tuesday, 31 March, 2015 1:49:42 AM
Sub
so.
Idan, can you please take a look?
Thanks
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon"
Cc: users@ovirt.org
Sent: Monday, 30 March, 2015 4:18:08 PM
Subject: RE: [ovirt-users] Storage domain not in pool issue
Thank you for your help !
I
e its output here.
su - postgres -c "psql -U postgres engine -c 'select id,storage_pool_id from
storage_domains;'" | less -S
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon"
Cc: users@ovirt.org
Sent: Monday, 30 March, 2015 3
Which oVirt version are you using?
Also, please execute the following command and paste its output here.
vdsClient -s 0 getStorageDomainInfo d7b9d7cc-f7d6-43c7-ae13-e720951657c9
- Original Message -
From: "VONDRA Alain"
To: "Elad Ben Aharon"
Cc: users@ovirt.o
Hi,
Besides from these 2 storage domains, do you have an active master storage
domain in the pool?
Elad Ben Aharon
RHEV-QE storage
- Original Message -
From: "VONDRA Alain"
To: users@ovirt.org
Sent: Monday, 30 March, 2015 12:18:26 PM
Subject: [ovirt-users] Stor
Please try:
Under VMs tab --> Change CD --> Eject
Elad Ben Aharon
RHEV-QE storage
- Original Message -
From: "Nathanaël Blanchet"
To: users@ovirt.org
Sent: Tuesday, 3 March, 2015 4:01:44 PM
Subject: [ovirt-users] iso domain don't go into mainte
It will require an available size according to the disk snapshot you're
attempting to remove.
- Original Message -
From: "Rik Theys"
To: "Elad Ben Aharon"
Cc: users@ovirt.org
Sent: Wednesday, 11 February, 2015 3:06:35 PM
Subject: Re: [ovirt-users] Can
5. It also
depends on the OS you're using on the hosts. RHEL 7.1 supports it, but again,
as tech preview.
Therefore, the safest way to remove the snapshot of the disk would be to do it
while the VM is not running.
- Original Message -
From: "Rik Theys"
To: "Elad Ben
tab.
As for your second question, the free space has to be in the same storage
domain.
- Original Message -----
From: "Rik Theys"
To: "Elad Ben Aharon"
Cc: users@ovirt.org
Sent: Wednesday, 11 February, 2015 2:10:13 PM
Subject: Re: [ovirt-users] Can't re
*equals or larger than the disk size
- Original Message -
From: "Elad Ben Aharon"
To: "Rik Theys"
Cc: users@ovirt.org
Sent: Wednesday, 11 February, 2015 12:18:35 PM
Subject: Re: [ovirt-users] Can't remove snapshot due to low disk space on
storage domain?
size.
Elad Ben Aharon
RHEV-QE storage
- Original Message -
From: "Rik Theys"
To: users@ovirt.org
Sent: Tuesday, 10 February, 2015 12:00:10 PM
Subject: [ovirt-users] Can't remove snapshot due to low disk space on storage
domain?
Hi,
I'm running
eAcqusitionFailed()
ResourceAcqusitionFailed: Could not acquire resource. Probably resource factory
threw an exception.: ()
- Original Message -
From: "Steven M. Bellistri"
To: "Elad Ben Aharon"
Sent: Tuesday, 10 February, 2015 6:35:32 PM
Subject: RE: [ovirt-use
Thanks Steven, I filed a bug for the Virt-IO-SCSI issue
https://bugzilla.redhat.com/show_bug.cgi?id=1191397 .
- Original Message -
From: "Steven M. Bellistri"
To: "Elad Ben Aharon"
Cc: "Aharon Canan" , users@ovirt.org
Sent: Tuesday, 10 February
Hi Donny,
Is it possible that the VMs that you fail yo import due to " Error while
executing action: Cannot import VM. Storage Domain doesn't exist " have disks
located on other storage domains which weren't imported to the setup?
Elad Ben Aharon
RHEV-QE storage
--
tions, like disks creation, it shouldn't
take more than a few minutes.
- Original Message -
From: "Steven M. Bellistri"
To: "Elad Ben Aharon"
Cc: "Aharon Canan" , users@ovirt.org
Sent: Thursday, 5 February, 2015 5:41:11 PM
Subject: RE: [ovirt-use
1 - 100 of 133 matches
Mail list logo