[Users] Small howto to install ovirt dreyou on Centos 6.4
Hi For manager, - yum install wget - wget http://www.dreyou.org/ovirt/ovirt-dre.repo -P /etc/yum.repos.d/ - yum install ovirt-engine For hypervisor: selinux and firewall are activated, DO NOT remove them You must have a working dns between you nodes (if all-in-one it's ok), at least put nameservers into /etc/hosts (hyp and manger) - su -c 'rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm ' - yum install wget - wget http://www.dreyou.org/ovirt/ovirt-dre.repo -P /etc/yum.repos.d/ - yum clean all - yum makecache - check that ifcfg-eth0 does not contain NETMASK and PREFIX, remove PREFIX if needed - yum install vdsm - Ovirt node can now be added into the manager - setsebool -P virt_use_sanlock=on - setsebool -P virt_use_nfs=on - yum install vdsm-hook-qemucmdline vdsm-hook-fileinject vdsm-hook-floppy - service vdsmd restart Hope it can help. Kevin ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Starting VM gets paused
Hi I add a similar issue on fedora18, I fixed it : yum update --enablerepo=updates-testing systemd-197-1.fc18.2 Do know if it can help. Kevin 2013/6/14 Cuongds cuongds@gmail.com Nicolas Ecarnot nicolas@... writes: Le 20/04/2013 22:55, Itamar Heim a écrit : On 03/27/2013 10:38 AM, Nicolas Ecarnot wrote: Le 26/03/2013 12:17, Nicolas Ecarnot a écrit : Le 25/03/2013 12:10, Nicolas Ecarnot a écrit : Le 24/03/2013 09:53, Dafna Ron a écrit : is the vm preallocated or thin provision disk type? This VM has 3 disks : - first disk to host the windows system : Thin provision - second disk to store some data : Preallocated - third disk to store some more data : Thin provision I'm realizing that amongst the 15 VMs, only this one and another one that is stopped are using preallocated disks. I'm regularly migrating some VMs (and stopping and starting and playing with them) with no issue, and they all are using thin provisioned disks! Could this be a common factor of the problem? also, can you please attach engine, vdsm, libvirt and the vm's qemu logs? Relevant logs : Ok, I'm in the process of collecting the logs and posting them in a useable manner. More to come. Ok, once again, I ran a test and observed the relevant logs. I tried to isolate the time frames, but it may be long for vdsm.log Here they are : * /var/log/libvirt/qemu/serv-chk-adm3.log http://pastebin.com/JVKMSmxD * /var/log/libvirtd.log http://pastebin.com/sWGDCqNh * /var/log/vdsm/vdsm.log (the BIG one) http://pastebin.com/bevTEhym What I can add to help you help me, is that : - I saw that all my VM appear as tainted. I did not know what that meant (but RTFMed since), and this does not appear to disturb the other VMs - Many VMs including the problematic one have been imported from ovirt-v2v with now such issue. - This particular VM was also imported, but the starting point was a vmdk or ova single file. - Two additionnal data disks were added - As I said, this is the only running VM stored as pre allocated. Regards, One suggestion : I see no obvious errors in the log files. Could this paused state happen due to a VM's kernel panic? is this still relevant? It is! Further investigations from my colleague shown the following facts : - This VM has 3 disks. Only one of those disks is responsible for the problem - In this disk, my coworker has found only 3 files (database files) that he can do nothing with without leading to the freeze. - He tried to cat them into /dev/null, and this is leading to the freeze - He tried to copy them into another disk - freeze! We see absolutely no evidence of a kernel panic. Rather, this seems to be related to a network bottleneck between the node and the iSCSI SAN, leading to oVirt unable to sustain a sufficent bandwidth and freezing the VM. Since then, we moved to another solution, but for the sake of opensource debugging, we did kept the faulty VM for your eyes only :) Hi, anyone has answer? I got same issue. I create new vm and cannot start on ovirt node. The status wating for launch long time and vm cannot start. here is vdsm log: VM Channels Listener::DEBUG::2013-06-14 18:32:32,504::vmChannels::104::vds:: (_handle_unconnected) Trying to connect fileno 37. VM Channels Listener::DEBUG::2013-06-14 18:32:32,504::guestIF::95::vm.Vm:: (_connect) vmId=`ffd60b1c-9a3c-4853-88aa-7973f9756c96`::Attempting connection to /var/lib/libvirt/qemu/channels/4000570- 01.com.redhat.rhevm.vdsm VM Channels Listener::DEBUG::2013-06-14 18:32:33,505::vmChannels::104::vds:: (_handle_unconnected) Trying to connect fileno 32. VM Channels Listener::DEBUG::2013-06-14 18:32:33,505::guestIF::95::vm.Vm:: (_connect) vmId=`187f61c9-d81f-491a-b5f0-4798ec6c8342`::Attempting connection to /var/lib/libvirt/qemu/channels/4000565- 01.com.redhat.rhevm.vdsm VM Channels Listener::DEBUG::2013-06-14 18:32:33,505::vmChannels::104::vds:: (_handle_unconnected) Trying to connect fileno 33. VM Channels Listener::DEBUG::2013-06-14 18:32:33,505::guestIF::95::vm.Vm:: (_connect) vmId=`6c3074ae-c752-4622-94e7-a4ca09b252f7`::Attempting connection to /var/lib/libvirt/qemu/channels/4000563- 02.com.redhat.rhevm.vdsm VM Channels Listener::DEBUG::2013-06-14 18:32:33,506::vmChannels::104::vds:: (_handle_unconnected) Trying to connect fileno 35. VM Channels Listener::DEBUG::2013-06-14 18:32:33,506::guestIF::95::vm.Vm:: (_connect) vmId=`20f144cd-f027-4710-a433-dcdc62eec554`::Attempting connection to /var/lib/libvirt/qemu/channels/4000568- 01.com.redhat.rhevm.vdsm VM Channels Listener::DEBUG::2013-06-14 18:32:33,506::vmChannels::104::vds:: (_handle_unconnected) Trying to connect fileno 37. VM Channels Listener::DEBUG::2013-06-14 18:32:33,506::guestIF::95::vm.Vm:: (_connect)
Re: [Users] vlan interface failed : Bridged network Internet is attached to multiple interfaces: UNKNOWN on Host node1.
Hi
(it works)
I've installed a fresh f18 netinstall.
I've install all these rpm from
https://admin.fedoraproject.org/updates/FEDORA-2013-1590/initscripts-9.42.2-1.fc18,systemd-197-1.fc18.2
:
-rw-r--r--. 1 root root 123K 20 févr. 17:08
debugmode-9.42.2-1.fc18.x86_64.rpm
-rw-r--r--. 1 root root 919K 20 févr. 17:08
initscripts-9.42.2-1.fc18.x86_64.rpm
-rw-r--r--. 1 root root 192K 20 févr. 17:08
initscripts-debuginfo-9.42.2-1.fc18.x86_64.rpm
-rw-r--r--. 1 root root 37K 28 janv. 20:06
libgudev1-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 49K 28 janv. 20:06
libgudev1-devel-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 2,2M 28 janv. 20:06 systemd-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 27K 28 janv. 20:05
systemd-analyze-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 7,0M 28 janv. 20:05
systemd-debuginfo-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 131K 28 janv. 20:05
systemd-devel-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 128K 28 janv. 20:06
systemd-libs-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 33K 28 janv. 20:06
systemd-python-197-1.fc18.2.x86_64.rpm
-rw-r--r--. 1 root root 25K 28 janv. 20:05
systemd-sysv-197-1.fc18.2.x86_64.rpm
When installing vdsm from the manager, the node loose the network.
In fact NetworkManager to no add the gateway, so I add it to
/etc/sysconfig/network, and do a reinstall
The node reboot and come back as non operationnal.
In fact the ovirtmgmt was not attached to p1p1, so I attached it, and no
issue.
The node is up
Then I attached my Vlan interface, and IT WORKS as requested !!
Nice work guys, I have only set a gateway and installed required rpm, leave
NetworkManager started, and no issue regarding network for the moment.
Kevin
2013/2/21 Antoni Segura Puimedon asegu...@redhat.com
They pushed a change to initscripts and systemd that should fix the issue:
https://admin.fedoraproject.org/updates/FEDORA-2013-1590/initscripts-9.42.2-1.fc18,systemd-197-1.fc18.2
- Original Message -
From: Jeff Bailey bai...@cs.kent.edu
To: users@ovirt.org
Sent: Wednesday, February 20, 2013 11:26:33 AM
Subject: Re: [Users] vlan interface failed : Bridged network Internet is
attached to multiple interfaces: UNKNOWN
on Host node1.
On 2/20/2013 4:56 AM, Antoni Segura Puimedon wrote:
There's a systemd hackfest this week on occasion of the developers
conference in Brno. I'll try to see what can be done about this.
@Kevin. Did you try the 60-net.rules that Lukas Nykryn proposed?
ACTION==add, SUBSYSTEM==net, ATTRS{type}==1,
PROGRAM=/lib/udev/rename_device, RESULT==?*, NAME=$result
I had tried this and it didn't help. It seems that the vlan
interface
has type 1 (/sys/class/net/em1_1.538/type contains 1) and the rename
still happens.
Best,
Toni
- Original Message -
From: Jeff Bailey bai...@cs.kent.edu
To: users@ovirt.org
Sent: Wednesday, February 20, 2013 3:38:28 AM
Subject: Re: [Users] vlan interface failed : Bridged network
Internet is attached to multiple interfaces: UNKNOWN
on Host node1.
On 2/19/2013 8:04 PM, Jeff Bailey wrote:
On 2/19/2013 5:34 PM, Dan Kenigsberg wrote:
On Tue, Feb 19, 2013 at 11:12:42PM +0100, Kevin Maziere Aubry
wrote:
Hi
I've just found a workaround ... rm
/usr/lib/udev/rules.d/60-net.rules and
reboot
Then I can add vlan to physical interface.
2013/2/19 Kevin Maziere Aubry kevin.mazi...@alterway.fr
Hi
Today on IRC we worked on this issue and I will try to
summarized the
results of our troubleshooting :
Current stable systemd rpm has a bug with device mapper which
cause
all
device created on a fibrechannel to have wrong access right.
So the workaround is to replace systemd with the one on the
testing
repo.
But the testing release as also a bug with udev which rename
network
interface so that each new network interface is named
renameX@interface.
We test some udev workaround unsucessfully. (
https://bugzilla.redhat.com/show_bug.cgi?id=907365 )
Now I think a patch on systemd testing rpm should fix the
issue,
waiting
for it
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=912323
Last word that I've heard about this bug ^^^ (Bug 912323 -
Adding
a
VLAN Device does not Work ) is that Muli can no longer
reproduce
it on
his host.
If this does reproduce on your system, would you provide more
data
as
requested on
https://bugzilla.redhat.com/show_bug.cgi?id=912323#c2
?
Note that I've just called the systemd cavalry to our
assistance.
I thought I had a simple (if inconvenient) work around but it
looks
like something (either the deploy or syncing the management
network)
puts the HWADDR line back in ifcfg-em1_1. I'm going to do some
more
testing... Yep, it's the network sync that adds HWADDR back
which
then triggers udev to rename em1_1.538 to em1_1
Re: [Users] Fwd: Re: Permission issues
Sur. I update systemd and remove udev network conf file. I also stop network manager and add gateway to /etc/sysconfig/network. Also I set dns manager name to /etc/hosts file to avoid dns issue. It works ;) Le 20 févr. 2013 18:42, Jakub Bittner j.bitt...@nbu.cz a écrit : I wonder if is there any way to create ovirt-node from running Fedora 18 netinstalled server. Do anybody know what packages should I install? Thanks __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] vlan interface failed : Bridged network Internet is attached to multiple interfaces: UNKNOWN on Host node1.
Hi there Few weeks ago I report on the 3.2beta a problem to set a new Vlan tagged interface. I've sent logs to Antoni. Now on the stable release, fresh install, I try to add a vlan tagged interface, and I have exactly the same error. I don't understand how such a problem in a stable release is possible ? Does anyone success to had a vlan ? I can't use ovirtmgmt network to go to Internet, so that i can't use 3.2 release. I can send log again if needed, just ask :) Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan interface failed : Bridged network Internet is attached to multiple interfaces: UNKNOWN on Host node1.
Hi Today on IRC we worked on this issue and I will try to summarized the results of our troubleshooting : Current stable systemd rpm has a bug with device mapper which cause all device created on a fibrechannel to have wrong access right. So the workaround is to replace systemd with the one on the testing repo. But the testing release as also a bug with udev which rename network interface so that each new network interface is named renameX@interface. We test some udev workaround unsucessfully. ( https://bugzilla.redhat.com/show_bug.cgi?id=907365 ) Now I think a patch on systemd testing rpm should fix the issue, waiting for it Reference: https://bugzilla.redhat.com/show_bug.cgi?id=912323 Thx to Antoni for is help Hi there Few weeks ago I report on the 3.2beta a problem to set a new Vlan tagged interface. I've sent logs to Antoni. Now on the stable release, fresh install, I try to add a vlan tagged interface, and I have exactly the same error. I don't understand how such a problem in a stable release is possible ? Does anyone success to had a vlan ? I can't use ovirtmgmt network to go to Internet, so that i can't use 3.2 release. I can send log again if needed, just ask :) Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vlan interface failed : Bridged network Internet is attached to multiple interfaces: UNKNOWN on Host node1.
Hi I've just found a workaround ... rm /usr/lib/udev/rules.d/60-net.rules and reboot Then I can add vlan to physical interface. 2013/2/19 Kevin Maziere Aubry kevin.mazi...@alterway.fr Hi Today on IRC we worked on this issue and I will try to summarized the results of our troubleshooting : Current stable systemd rpm has a bug with device mapper which cause all device created on a fibrechannel to have wrong access right. So the workaround is to replace systemd with the one on the testing repo. But the testing release as also a bug with udev which rename network interface so that each new network interface is named renameX@interface. We test some udev workaround unsucessfully. ( https://bugzilla.redhat.com/show_bug.cgi?id=907365 ) Now I think a patch on systemd testing rpm should fix the issue, waiting for it Reference: https://bugzilla.redhat.com/show_bug.cgi?id=912323 Thx to Antoni for is help Hi there Few weeks ago I report on the 3.2beta a problem to set a new Vlan tagged interface. I've sent logs to Antoni. Now on the stable release, fresh install, I try to add a vlan tagged interface, and I have exactly the same error. I don't understand how such a problem in a stable release is possible ? Does anyone success to had a vlan ? I can't use ovirtmgmt network to go to Internet, so that i can't use 3.2 release. I can send log again if needed, just ask :) Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] snapshot taken while live VM operates cause unresponsive hypervisor behavior
Hi I add the same problem on ovrit3.1 on f17 and it is resolved on f18+ovirt3.2 Kevin 2013/2/7 Dafna Ron d...@redhat.com also full engine, vdsm and libvirtd logs On 02/07/2013 05:05 PM, Shu Ming wrote: The libvirt and qemu version in the VDSM host may help the debugging. Alexandru Vladulescu: Hi, Using 3.1.0-3.19 from dreyou's repo on Centos 6.3 version, running multiple VM on the hypervisor node and attempting to take a snapshot from one of the running VMs generates errors for VDSM daemon as show below: / //[root@hyper02 ~]# vdsClient -s 0 list// //Traceback (most recent call last):// //File /usr/share/vdsm/vdsClient.py, line 2275, in module// //code, message = commands[command][0](commandArgs)// //File /usr/share/vdsm/vdsClient.py, line 280, in do_list// //response = self.s.list(True, vms)// //File /usr/lib64/python2.6/xmlrpclib.py, line 1199, in __call__// //return self.__send(self.__name, args)// //File /usr/lib64/python2.6/xmlrpclib.py, line 1489, in __request// //verbose=self.__verbose// //File /usr/lib64/python2.6/xmlrpclib.py, line 1253, in request// //return self._parse_response(h.getfile(), sock)// //File /usr/lib64/python2.6/xmlrpclib.py, line 1392, in _parse_response// //return u.close()// //File /usr/lib64/python2.6/xmlrpclib.py, line 838, in close// //raise Fault(**self._stack[0])// //Fault: Fault 1: type 'exceptions.TypeError':cannot marshal None unless allow_none is enabled/ Paste from ovirt admin GUI log: /2013-Feb-07, 15:29:59 VM ipa01 is down. Exit message: User shut down// //2013-Feb-07, 15:29:34 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02).// //2013-Feb-07, 15:29:32 Starting migration of VM ipa01 from Host Hyper02 to Host Hyper01 (User: admin@internal.).// //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02).// //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02). Trying to migrate to another Host.// //2013-Feb-07, 15:29:08 Starting migration of VM ipa01 from Host Hyper02 to Host Hyper01 (User: admin@internal.).// //2013-Feb-07, 15:24:58 Detected new Host Hyper02. Host state was set to Up.// //2013-Feb-07, 15:24:53 Host Hyper02 is initializing. Message: Recovering from crash or Initializing// //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: Hyper02).// //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: Hyper02).// //2013-Feb-07, 15:20:43 Snapshot [initial installation][after ipa server installation] creation for VM ipa01 has been completed.// //2013-Feb-07, 15:20:43 VM ipa01 has paused due to unknown storage error./ Looking through htop command could see that VM were still running and responsive but any vdsclient command failed with the upper code paste I have given. Solution here was to connect to each VM, shut it down and restart vdsmd and power it up again. There's no problem with the storage size as it has aprox 800GB free of space and running through NFS. All nfs mount points were running okay at that time. After the VM has been snapshoot-ed went into pause mode and had to un-pause it from GUI, but the VM was still responsive through network and operations. Has anybody seen something related to this by now or it's just related to 3.1 version ? Mentioning the fact that I did a research on the similar mailing list topics and could not find something related to this error. I would happily provide logs if needed. Regards, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dafna Ron ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] adding multiple interfaces with different networks
Hi Ovirt: 3.2 I agree, I removed it on a DC that has no host and the option on the network tree is removed. But when I add host to the DC again, and edit their network interface, the ovirtgmgt is seen with the vm icon. And the ovirtmgmt is configured has static, and I can't change that. Also the ovirtmgmt network is mark unsynchronized, I don't know what it mean and how to fix it http://www.ovirt.org/SetupNetworks_SyncNetworks#How_to_Sync_Network.3F Also I can't add a network to the host, I have no error message, but in events I can see Bridged network Internet is attached to multiple interfaces: UNKNOWN on Host node2. Host node1's following network(s) are not synchronized with their Logical Network configuration: ovirtmgmt. So I think that unsync network cause all my trouble. Kevin 2013/2/4 Mike Kolesnik mkole...@redhat.com -- Hi Hi Kevin, I've tested to uncheck the box vm network on ovirt 3.2 and there is an error message saying that the interface must be remove on all hosts (hypervisor) that are using it. The VM network is separate from the admin network, so I sound like a bug :( It isn't a bug, it is a check that is being made to make sure nothing will break if you change a network's property (VM or not, the VLAN ID, the MTU). If you have a host that already has this network set-up on it, then it will become unsynchronized with the logical definition of the network, meaning that it might fail to run your VMs. This is why it states that in order to change any of these properties, you need to remove the network from the host. If you want to change these properties on a management network, then the data center that has this network mustn't have any hosts when you change the properties. Regards, Mike Kevin 2013/1/23 Mike Kolesnik mkole...@redhat.com -- Hi I have exactly the same issue. This mean that a 1Gb (at least) interface must be dedicated to the ovirtmgmt interface, which is not a good idea. Can you please try marking the ovirtmgmt network as non-vm network, syncing it with the hosts, and then try to add VLAN networks on the same bond (or interface)? You should probably do this with latest versions of oVirt/VDSM. Kevin 2012/12/26 Jonathan Horne jho...@skopos.us 2012-12-26 16:48:56,416 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method 2012-12-26 16:48:56,417 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = bonding 'bond2' is already member of network 'ovirtmgmt' 2012-12-26 16:48:56,418 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (ajp--0.0.0.0-8009-8) [2d2d6184] org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = bonding 'bond2' is already member of network 'ovirtmgmt' 2012-12-26 16:48:56,418 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--0.0.0.0-8009-8) [2d2d6184] Command SetupNetworksVDS execution failed. Exception: RuntimeException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = bonding 'bond2' is already member of network 'ovirtmgmt' so im guessing… i can't have my vlan3204 or vlan3202 share an interface with ovirtmgmt? [root@d0lppc021 ~]# rpm -qa|grep ovirt ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch ovirt-engine-cli-3.1.0.7-1.el6.noarch ovirt-image-uploader-3.1.0-16.el6.noarch ovirt-engine-backend-3.1.0-3.19.el6.noarch ovirt-engine-tools-common-3.1.0-3.19.el6.noarch ovirt-iso-uploader-3.1.0-16.el6.noarch ovirt-engine-genericapi-3.1.0-3.19.el6.noarch ovirt-engine-config-3.1.0-3.19.el6.noarch ovirt-log-collector-3.1.0-16.el6.noarch ovirt-engine-restapi-3.1.0-3.19.el6.noarch ovirt-engine-userportal-3.1.0-3.19.el6.noarch ovirt-engine-notification-service-3.1.0-3.19.el6.noarch ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch ovirt-engine-3.1.0-3.19.el6.noarch ovirt-engine-jbossas711-1-0.x86_64 ovirt-engine-setup-3.1.0-3.19.el6.noarch ovirt-engine-sdk-3.1.0.5-1.el6.noarch -- This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable
[Users] Storage FC on ovirt 3.2 : /dev/dm* bad chown
Hi My environnement is Fedora18 / Ovirt 3.2 and VDSM vdsm-4.10.3-6.fc18.x86_64. I use a storage on fiber channel. When creating a VM the disk is created by ovirt. When starting the VM the disk has not the permission to be accessed by vdsm. In fact the device for the disk has root:disks as owner/group. Changing that by 36.36 permit the VM to start and work fine. But snapshots do not work, and a reboot cause udev to remap the disk to another /dev/dm-* device. My fedora18 has selinux disabled. On irc : apuimedo vdsm/storage/blockSD.py:cmd = [constants.EXT_CHOWN, %s:%s % apuimedo vdsm/storage/blockSD.py:self.log.error(failed to chown %s, masterDir) apuimedo vdsm/storage/fileUtils.py:def chown(path, user=-1, group=-1): apuimedo vdsm/storage/fileUtils.py:os.chown(path, uid, gid) apuimedo vdsm/storage/lvm.py:cmd = [constants.EXT_CHOWN, USER_GROUP, lv_path] Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage FC on ovirt 3.2 : /dev/dm* bad chown
Hi It looks like this bug report : https://bugzilla.redhat.com/show_bug.cgi?id=903716 Kevin 2013/2/1 Kevin Maziere Aubry kevin.mazi...@alterway.fr Hi My environnement is Fedora18 / Ovirt 3.2 and VDSM vdsm-4.10.3-6.fc18.x86_64. I use a storage on fiber channel. When creating a VM the disk is created by ovirt. When starting the VM the disk has not the permission to be accessed by vdsm. In fact the device for the disk has root:disks as owner/group. Changing that by 36.36 permit the VM to start and work fine. But snapshots do not work, and a reboot cause udev to remap the disk to another /dev/dm-* device. My fedora18 has selinux disabled. On irc : apuimedo vdsm/storage/blockSD.py:cmd = [constants.EXT_CHOWN, %s:%s % apuimedo vdsm/storage/blockSD.py:self.log.error(failed to chown %s, masterDir) apuimedo vdsm/storage/fileUtils.py:def chown(path, user=-1, group=-1): apuimedo vdsm/storage/fileUtils.py:os.chown(path, uid, gid) apuimedo vdsm/storage/lvm.py:cmd = [constants.EXT_CHOWN, USER_GROUP, lv_path] Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] BFA FC driver no stable on Fedora
Hi Mike thanks for your reply. I'm using oVirt Node Hypervisor release 2.5.5 (0.1.fc17). On the latest kernel on fedora17 the problem is still here. I've other issue on this node image, so I will test on fc18 and vdsm from repo. Kevin 2013/1/23 Mike Burns mbu...@redhat.com On Wed, 2013-01-23 at 10:25 +0100, Kevin Maziere Aubry wrote: Hi I've spent hours to make my Brocade FC card working on Fedora17 or Ovirt Node build. In fact the card are randomly seen by the system, which is really painfull. So I've downloaded, compile and installed the latest driver from Brocade, and now when I load the module the card is seen. So I've installed : bfa_util_linux_noioctl-3.2.0.0-0.noarch bfa_driver_linux-3.2.0.0-0.noarch Hi Kevin, A few things: 1. what version of ovirt-node are you using? 2. You can use the plugin tooling to install an updated kmod package as long as it's in rpm format. This will ensure that it gets into both the system and the initramfs. It's an offline process that will produce a new iso that you can install or upgrade to. The tool is called edit-node and is available in the ovirt-node-tools rpm (from the ovirt.org repos) 3. Do you know if it's fixed in a recent release of the kernel on Fedora? If it is, then we can spin an updated version of the image and pick up the fix directly from fedora. Mike And the module info are : # modinfo bfa filename: /lib/modules/3.3.4-5.fc17.x86_64/kernel/drivers/scsi/bfa.ko version:3.2.0.0 author: Brocade Communications Systems, Inc. description:Brocade Fibre Channel HBA Driver fcpim ipfc license:GPL srcversion: 5C0FBDF3571ABCA9632B9CA alias: pci:v1657d0022sv*sd*bc0Csc04i00* alias: pci:v1657d0021sv*sd*bc0Csc04i00* alias: pci:v1657d0014sv*sd*bc0Csc04i00* alias: pci:v1657d0017sv*sd*bc*sc*i* alias: pci:v1657d0013sv*sd*bc*sc*i* depends:scsi_transport_fc vermagic: 3.3.4-5.fc17.x86_64 SMP mod_unload parm: os_name:OS name of the hba host machine (charp) parm: os_patch:OS patch level of the hba host machine (charp) parm: host_name:Hostname of the hba host machine (charp) parm: num_rports:Max number of rports supported per port (physical/logical), default=1024 (int) parm: num_ioims:Max number of ioim requests, default=2000 (int) parm: num_tios:Max number of fwtio requests, default=0 (int) parm: num_tms:Max number of task im requests, default=128 (int) parm: num_fcxps:Max number of fcxp requests, default=64 (int) parm: num_ufbufs:Max number of unsolicited frame buffers, default=64 (int) parm: reqq_size:Max number of request queue elements, default=256 (int) parm: rspq_size:Max number of response queue elements, default=64 (int) parm: num_sgpgs:Number of scatter/gather pages, default=2048 (int) parm: rport_del_timeout:Rport delete timeout, default=90 secs, Range[0] (int) parm: bfa_lun_queue_depth:Lun queue depth, default=32, Range[0] (int) parm: bfa_io_max_sge:Max io scatter/gather elements , default=255 (int) parm: log_level:Driver log level, default=3, Range[Critical:1|Error:2|Warning:3|Info:4] (int) parm: ioc_auto_recover:IOC auto recovery, default=1, Range[off:0|on:1] (int) parm: linkup_delay:Link up delay, default=30 secs for boot port. Otherwise 10 secs in RHEL4 0 for [RHEL5, SLES10, ESX40] Range[0] (int) parm: msix_disable_cb:Disable Message Signaled Interrupts for Brocade-415/425/815/825 cards, default=0, Range[false:0|true:1] (int) parm: msix_disable_ct:Disable Message Signaled Interrupts if possible for Brocade-1010/1020/804/1007/1741 cards, default=0, Range[false:0|true:1] (int) parm: fdmi_enable:Enables fdmi registration, default=1, Range[false:0|true:1] (int) parm: pcie_max_read_reqsz:PCIe max read request size, default=0 (use system setting), Range[128|256|512|1024|2048|4096] (int) parm: max_xfer_size:default=32MB, Range[64k|128k|256k|512k| 1024k|2048k] (int) parm: max_rport_logins:Max number of logins to initiator and target rports on a port (physical/logical), default=1024 (int) I guess that I could be a possible to update the driver inside the Ovirt Node build ? Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way
[Users] VM migration failed on oVirt Node Hypervisor release 2.5.5 (0.1.fc17) : empty cacert.pem
Hi My concern is about ovirt node oVirt Node Hypervisor release 2.5.5 (0.1.fc17), iso downloaded from ovirt. I've installed and connect 4 nodes on a manager, and try to migrate a VM between hypervisors. I always fail with error : libvirtError: operation failed: Failed to connect to remote libvirt URI qemu+tls://172.16.6.3/system where 172.0.0.1 is the IP of a nde. I've check on the node and the port 16514 is open. I also test the virsh command to have a better error message : virsh -c tls://172.16.6.3/system error: Unable to import client certificate /etc/pki/CA/cacert.pem I've checked the cert file on the ovirt node and found it was empty, and that on all nodes install from the Ovirt ISO it is empty I also checked /config/etc/pki/CA/cacert.pem, which is also empty. On a vdsm node install from package on fedora17, it works. ls -al /etc/pki/CA/cacert.pem lrwxrwxrwx. 1 root root 30 18 janv. 14:30 /etc/pki/CA/cacert.pem - /etc/pki/vdsm/certs/cacert.pem And the cert is good. I've seen no bug report regarding the feature... Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] BFA FC driver no stable on Fedora
Hi I've spent hours to make my Brocade FC card working on Fedora17 or Ovirt Node build. In fact the card are randomly seen by the system, which is really painfull. So I've downloaded, compile and installed the latest driver from Brocade, and now when I load the module the card is seen. So I've installed : bfa_util_linux_noioctl-3.2.0.0-0.noarch bfa_driver_linux-3.2.0.0-0.noarch And the module info are : # modinfo bfa filename: /lib/modules/3.3.4-5.fc17.x86_64/kernel/drivers/scsi/bfa.ko version:3.2.0.0 author: Brocade Communications Systems, Inc. description:Brocade Fibre Channel HBA Driver fcpim ipfc license:GPL srcversion: 5C0FBDF3571ABCA9632B9CA alias: pci:v1657d0022sv*sd*bc0Csc04i00* alias: pci:v1657d0021sv*sd*bc0Csc04i00* alias: pci:v1657d0014sv*sd*bc0Csc04i00* alias: pci:v1657d0017sv*sd*bc*sc*i* alias: pci:v1657d0013sv*sd*bc*sc*i* depends:scsi_transport_fc vermagic: 3.3.4-5.fc17.x86_64 SMP mod_unload parm: os_name:OS name of the hba host machine (charp) parm: os_patch:OS patch level of the hba host machine (charp) parm: host_name:Hostname of the hba host machine (charp) parm: num_rports:Max number of rports supported per port (physical/logical), default=1024 (int) parm: num_ioims:Max number of ioim requests, default=2000 (int) parm: num_tios:Max number of fwtio requests, default=0 (int) parm: num_tms:Max number of task im requests, default=128 (int) parm: num_fcxps:Max number of fcxp requests, default=64 (int) parm: num_ufbufs:Max number of unsolicited frame buffers, default=64 (int) parm: reqq_size:Max number of request queue elements, default=256 (int) parm: rspq_size:Max number of response queue elements, default=64 (int) parm: num_sgpgs:Number of scatter/gather pages, default=2048 (int) parm: rport_del_timeout:Rport delete timeout, default=90 secs, Range[0] (int) parm: bfa_lun_queue_depth:Lun queue depth, default=32, Range[0] (int) parm: bfa_io_max_sge:Max io scatter/gather elements , default=255 (int) parm: log_level:Driver log level, default=3, Range[Critical:1|Error:2|Warning:3|Info:4] (int) parm: ioc_auto_recover:IOC auto recovery, default=1, Range[off:0|on:1] (int) parm: linkup_delay:Link up delay, default=30 secs for boot port. Otherwise 10 secs in RHEL4 0 for [RHEL5, SLES10, ESX40] Range[0] (int) parm: msix_disable_cb:Disable Message Signaled Interrupts for Brocade-415/425/815/825 cards, default=0, Range[false:0|true:1] (int) parm: msix_disable_ct:Disable Message Signaled Interrupts if possible for Brocade-1010/1020/804/1007/1741 cards, default=0, Range[false:0|true:1] (int) parm: fdmi_enable:Enables fdmi registration, default=1, Range[false:0|true:1] (int) parm: pcie_max_read_reqsz:PCIe max read request size, default=0 (use system setting), Range[128|256|512|1024|2048|4096] (int) parm: max_xfer_size:default=32MB, Range[64k|128k|256k|512k|1024k|2048k] (int) parm: max_rport_logins:Max number of logins to initiator and target rports on a port (physical/logical), default=1024 (int) I guess that I could be a possible to update the driver inside the Ovirt Node build ? Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] FC on ovirt-node with brocade : port never up
Hi all I have a strange behaviour between my ovirt node and my FC switch. All material are brocade. Ovirt node release : oVirt Node Hypervisor release 2.5.5 (0.1.fc17) The thing is that the node doesn't detect the FC port, it detect the FC card only. On 10 clone hosts, 2 have detected the link, all others fails. And for these 2 hosts I've rebooted them many time before it works. Because there is only the BFA driver include, I can't debug anything, or update Does anyone have a feedback on that ? Kevin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] What do you want to see in oVirt next?
+1 :) Le 6 janv. 2013 17:41, Jorick Astrego jor...@netbulae.eu a écrit : Hi, Firstly, thanks for all the great work on oVirt in 2012. What I haven't seen mentioned yet is any Open vSwitch or Openstack Quantum integration. This would help scale oVirt even further. I've seen a POC already out there http://www.siliconloons.com/?**p=179http://www.siliconloons.com/?p=179 Regards, Jorick Astrego Netbulae B.V. __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Hi http://pastebin.fr/26180 contains all the result. I do not use bond interface. I manager over ovirmgmt on p1p1, and VM are on Internet which is bridge on p1p2.100. Kévin 2013/1/3 Dan Yasny dya...@redhat.com virsh -r net-dumpxml direct-pool -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Thx, I will try to fix that. Kévin 2013/1/3 Dan Yasny dya...@redhat.com Ifconfig shows no FEX adapters, this is the reason the direct-pool network has no interfaces. You need to configure your UCS chassis to assign dynamic NICs to the hosts. An unassigned dynamic NIC can be easily detected as a device that has a mac that looks like 00:00:00:00:00:00 (which is what the vmfex hook looks for) - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Dan Yasny dya...@redhat.com Cc: users@ovirt.org Sent: Thursday, 3 January, 2013 10:41:27 AM Subject: Re: [Users] vm-fex paramters Hi http://pastebin.fr/26180 contains all the result. I do not use bond interface. I manager over ovirmgmt on p1p1, and VM are on Internet which is bridge on p1p2.100. Kévin 2013/1/3 Dan Yasny dya...@redhat.com virsh -r net-dumpxml direct-pool -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Change locale for VNC console
Hi Could you give the exact procedure to do that ? Thanks Kévin 2013/1/3 Alexandre Santos santosa...@gmail.com As Itamar once explained to me (I had the same problem): you can change the vnc keyboard layout via the config tool (VncKeyboardLayout option) globally. still missing as a per vm option (though you can easily do this via a hook if you need it per vm) Alex 2013/1/3 Frank Wall fw...@inotronic.de: Hi, when using oVirt 3.1 the locale for all VNC consoles defaults to en_US. This is OK if the user is using the same locale. But with any other locale on the client side (fr_FR, de_DE), the keyboard is really scrambled. As a result the VNC console is somewhat useless for an affected user. So my questions are... 1. How do I change the locale for VNC, either globally or for each VM? 2. Will there be an REST API call to configure the locale of the console? Thanks - Frank ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] What do you want to see in oVirt next?
Hii I think a IPAM is mandatory, so that the VM can grab their IP without human configuration. Kévin 2013/1/3 Itamar Heim ih...@redhat.com Hi Everyone, as we wrap oVirt 3.2, I wanted to check with oVirt users on what they find good/useful in oVirt, and what they would like to see improved/added in coming versions? Thanks, Itamar __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] vm-fex paramters
Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Hi I get the plugin from here : yum install http://resources.ovirt.org/releases/nightly/rpm/Fedora/17/noarch/vdsm-hook-vmfex-4.10.3-0.41.gitad916c7.fc17.noarch.rpm The error are : Thread-801738::DEBUG::2013-01-02 10:35:24,568::__init__::1249::Storage.Misc.excCmd::(_log) FAILED: err = 'vmfex: starting to edit VM \nvmfex: customProperty: \'00:1a:4a:1f:96:01\':\'p1p\'\nvmfex: ERROR Traceback (most recent call last):\n File /usr/libexec/vdsm/hooks/before_vm_start/50_vmfex, line 174, in module\nvmfexd = ast.literal_eval(vmfex)\n File /usr/lib64/python2.7/ast.py, line 49, in literal_eval\nnode_or_string = parse(node_or_string, mode=\'eval\')\n File /usr/lib64/python2.7/ast.py, line 37, in parse\nreturn compile(source, filename, mode, PyCF_ONLY_AST)\n File unknown, line 1\n\'00:1a:4a:1f:96:01\':\'p1p\'\n ^\nSyntaxError: invalid syntax\n\n'; rc = 2 SyntaxError: invalid syntax Where p1p is my UCS profile. Kévin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, 2 January, 2013 11:37:03 AM Subject: [Users] vm-fex paramters Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex Hi Kevin, Where did you download the hook from? -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Thanks Dan, the params are now good.
New error regarding libvirt :
Traceback (most recent call last):
File /usr/share/vdsm/vm.py, line 570, in _startUnderlyingVm
self._run()
File /usr/share/vdsm/libvirtvm.py, line 1364, in _run
self._connection.createXML(domxml, flags),
File /usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py, line
82, in wrapper
ret = f(*args, **kwargs)
File /usr/lib64/python2.7/site-packages/libvirt.py, line 2564, in
createXML
if ret is None:raise libvirtError('virDomainCreateXML() failed',
conn=self)
libvirtError: erreur interne network 'direct-pool' uses a direct mode, but
has no forward dev and no interface pool
Thread-823791::DEBUG::2013-01-02
18:21:49,892::vm::920::vm.Vm::(setDownStatus)
vmId=`32c3e4a2-96c1-40a5-b03c-dafeba50962e`::Changed state to Down: erreur
interne network 'direct-pool' uses a direct mode, but has no forward dev
and no interface pool
[root@node1 ~]# rpm -qa | grep libvirt
libvirt-debuginfo-0.10.1-1.fc17.x86_64
libvirt-0.10.1-1.fc17.x86_64
libvirt-daemon-config-network-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-interface-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-network-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-storage-0.10.1-1.fc17.x86_64
libvirt-daemon-lxc-0.10.1-1.fc17.x86_64
libvirt-daemon-qemu-0.10.1-1.fc17.x86_64
libvirt-docs-0.10.1-1.fc17.x86_64
libvirt-python-0.10.1-1.fc17.x86_64
libvirt-client-0.10.1-1.fc17.x86_64
libvirt-daemon-0.10.1-1.fc17.x86_64
libvirt-daemon-config-nwfilter-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-libxl-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-lxc-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-nodedev-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-nwfilter-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-secret-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-uml-0.10.1-1.fc17.x86_64
libvirt-daemon-kvm-0.10.1-1.fc17.x86_64
libvirt-daemon-uml-0.10.1-1.fc17.x86_64
libvirt-devel-0.10.1-1.fc17.x86_64
libvirt-lock-sanlock-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-qemu-0.10.1-1.fc17.x86_64
libvirt-daemon-driver-xen-0.10.1-1.fc17.x86_64
[root@node1 ~]#
Kevin
2013/1/2 Dan Yasny dya...@redhat.com
- Original Message -
From: Kevin Maziere Aubry kevin.mazi...@alterway.fr
To: Dan Yasny dya...@redhat.com
Sent: Wednesday, 2 January, 2013 3:26:46 PM
Subject: Re: [Users] vm-fex paramters
Hi
I tried these syntax :
'macadress':'profile'
macadress:profile
macadress:profile
The custom property you enter in the UI should look like this:
{'00:1a:4a:1f:96:01':'p1p'}
for additional mappings, what you write in the UI is as follows:
{'$MAC':'$PROFILE','$MAC1':'PROFILE1','MAC2':'PROFILE2'}
This strictly follows the python dictionary syntax, and it fails, because
the syntax requires curly braces
With macadress the mac adresse generic format : aa:aa:aa:aa:aa:aa
And the profile the name I set un UCs : p1p
Kevin
2013/1/2 Dan Yasny dya...@redhat.com
- Original Message -
From: Kevin Maziere Aubry kevin.mazi...@alterway.fr
To: Dan Yasny dya...@redhat.com
Sent: Wednesday, 2 January, 2013 1:26:52 PM
Subject: Re: [Users] vm-fex paramters
vmfex and I can add whatever I want as a parameter
Yes, but what exactly did you add?
2013/1/2 Dan Yasny dya...@redhat.com
- Original Message -
From: Kevin Maziere Aubry kevin.mazi...@alterway.fr
To: Dan Yasny dya...@redhat.com
Cc: users@ovirt.org
Sent: Wednesday, 2 January, 2013 12:01:27 PM
Subject: Re: [Users] vm-fex paramters
Hi
I get the plugin from here :
yum install
http://resources.ovirt.org/releases/nightly/rpm/Fedora/17/noarch/vdsm-hook-vmfex-4.10.3-0.41.gitad916c7.fc17.noarch.rpm
The error are :
Thread-801738::DEBUG::2013-01-02
10:35:24,568::__init__::1249::Storage.Misc.excCmd::(_log) FAILED:
err = 'vmfex: starting to edit VM \nvmfex: customProperty:
\'00:1a:4a:1f:96:01\':\'p1p\'\nvmfex: ERROR Traceback (most
recent
call last):\n File
/usr/libexec/vdsm/hooks/before_vm_start/50_vmfex, line 174, in
module\n vmfexd = ast.literal_eval(vmfex)\n File
/usr/lib64/python2.7/ast.py, line 49, in literal_eval\n
node_or_string = parse(node_or_string, mode=\'eval\')\n File
/usr/lib64/python2.7/ast.py, line 37, in parse\n return
compile(source, filename, mode, PyCF_ONLY_AST)\n File
unknown,
line 1\n \'00:1a:4a:1f:96:01\':\'p1p\'\n ^\nSyntaxError: invalid
syntax\n\n'; rc = 2
SyntaxError: invalid syntax
Where p1p is my UCS profile.
Thanks, can you also post your custom property, exactly as is looks
in the GUI?
Kévin
2013/1/2 Dan Yasny dya...@redhat.com
- Original Message -
From: Kevin Maziere Aubry kevin.mazi...@alterway.fr
To: users@ovirt.org
Sent: Wednesday, 2 January, 2013 11:37:03 AM
Subject
Re: [Users] tagged vs untagged and sharing the interface
Hi You can have as many vlan as you want on the same interface. Just create a new interface on the cluster with the required vlan set, and associate it on each node on the cluster. Ovirtmgmt is attached by default to an untagged interface, and you can add vlan and configure your switch port in dual mode (native vlan on cisco ).So your physical interface will handle ovirtmgmt on native vlan and others vlan on vlan interface on node. Don't Forget to update ovirtmgmt interface when adding an interface to the node, or ovirtmgmt will be in DHCP. Kevin Le 27 déc. 2012 21:01, Jonathan Horne jho...@skopos.us a écrit : if someone could help me confirm, but it appear that i cannot co-populate tagged vlan on the same interface as ovirtmgmt? for me it would really be better if i can share these 2 on same interface, but if i can't ill just have to live with it. can any one confirm this? thanks, jonathan -- This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Network reconfiguration in ovirt 3.1
Hi all System : Fedora 17 On node : Libvirt 0.10 Kernel Linux node1 3.6.10-2.fc17.x86_64 Stable VDSM from repo On manager : Ovirt 3.1 stable Kernel Linux ovirt-manager 3.5.4-1.fc17.x86_64 By default the ovirtmgmt interface is created on node as a bridge with the same parameters than p1p1. That is good so that you keep network working on the node. I've setup a new tagged network on Ovirt, which I have to add to all the node of my cluster. So I plug this new network on p1p2, do not touch to ovirtmgmt network, and apply... and the server is lost. In fact when reconfiguring the network the ovirtmgmt card is set to DHCP, which is the problem. And the only solution to make vdsm back online, is to reset the complete node. Kévin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Vdsm/libvir error during deploy
Hi
I suggest also to remove /var/lib/vdsm/netbackup directory.
Kevin
2012/12/21 Alon Bar-Lev alo...@redhat.com
- Original Message -
From: Joop jvdw...@xs4all.nl
To: users@ovirt.org
Sent: Friday, December 21, 2012 12:30:17 PM
Subject: [Users] Vdsm/libvir error during deploy
While using the latest nightly I can't deploy new hosts using oVirt.
rpm -aq | grep ovirt
ovirt-engine-backend-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-dbscripts-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-iso-uploader-3.1.0-1.fc17.noarch
ovirt-engine-tools-common-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-userportal-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-host-deploy-0.0.0-0.0.master.20121220.gitec2416f.fc17.noarch
ovirt-engine-config-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-cli-3.2.0.7-1.20121219.git5eddf58.fc17.noarch
ovirt-engine-webadmin-portal-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-restapi-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-genericapi-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-host-deploy-java-0.0.0-0.0.master.20121220.gitec2416f.fc17.noarch
ovirt-engine-notification-service-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-engine-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
ovirt-release-fedora-5-2.noarch
ovirt-image-uploader-3.1.0-1.fc17.noarch
ovirt-engine-sdk-3.2.0.5-1.20121219.gitc0ab704.fc17.noarch
ovirt-log-collector-3.1.0-1.fc17.noarch
ovirt-engine-setup-3.2.0-1.20121220.git9fdb0c2.fc17.noarch
I did an engine-cleanup/engine-setup to start with a clean slate,
further
I have a host that is used before and keeps loosing
networkconnectivity
when the vdsmd service is started so I did several yum removes of
packages
(libvirt related and qemu related and vdsm*) and removed the /etc/
and
/var entries where needed. Then I ran add host and end up with the
same
error I had before, full deploy log is attached but this is the real
and
only set of errors:
2012-12-21 11:00:26 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.bridge
plugin.executeRaw:324 execute: ['/usr/share/vdsm/addNetwork',
'ovirtmgmt',
'', '', u'em1', 'ONBOOT=yes', 'IPADDR=192.168.216.152',
'DNS2=172.19.1.18', 'DNS1=172.19.1.12',
'UUID=e121a99a-994e-479d-8de1-a56c14315545', 'IPV6INIT=no',
'USERCTL=no',
'GATEWAY=192.168.216.254', 'NETMASK=255.255.255.0',
'blockingdhcp=true'],
env=None
2012-12-21 11:00:30 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.bridge
plugin.executeRaw:341 execute-result: ['/usr/share/vdsm/addNetwork',
'ovirtmgmt', '', '', u'em1', 'ONBOOT=yes', 'IPADDR=192.168.216.152',
'DNS2=172.19.1.18', 'DNS1=172.19.1.12',
'UUID=e121a99a-994e-479d-8de1-a56c14315545', 'IPV6INIT=no',
'USERCTL=no',
'GATEWAY=192.168.216.254', 'NETMASK=255.255.255.0',
'blockingdhcp=true'],
rc=255
2012-12-21 11:00:30 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.bridge
plugin.execute:388 execute-output: ['/usr/share/vdsm/addNetwork',
'ovirtmgmt', '', '', u'em1', 'ONBOOT=yes', 'IPADDR=192.168.216.152',
'DNS2=172.19.1.18', 'DNS1=172.19.1.12',
'UUID=e121a99a-994e-479d-8de1-a56c14315545', 'IPV6INIT=no',
'USERCTL=no',
'GATEWAY=192.168.216.254', 'NETMASK=255.255.255.0',
'blockingdhcp=true']
stdout:
2012-12-21 11:00:30 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.bridge
plugin.execute:393 execute-output: ['/usr/share/vdsm/addNetwork',
'ovirtmgmt', '', '', u'em1', 'ONBOOT=yes', 'IPADDR=192.168.216.152',
'DNS2=172.19.1.18', 'DNS1=172.19.1.12',
'UUID=e121a99a-994e-479d-8de1-a56c14315545', 'IPV6INIT=no',
'USERCTL=no',
'GATEWAY=192.168.216.254', 'NETMASK=255.255.255.0',
'blockingdhcp=true']
stderr:
WARNING:Storage.LVM:Cannot create env file [Errno 2] No such file or
directory: '/var/run/vdsm/lvm.env'
WARNING:root:options IPADDR is deprecated. Use ipaddr instead
WARNING:root:options NETMASK is deprecated. Use netmask instead
WARNING:root:options GATEWAY is deprecated. Use gateway instead
WARNING:root:options ONBOOT is deprecated. Use onboot instead
INFO:root:Adding network ovirtmgmt with vlan=, bonding=,
nics=['em1'],
bondingOptions=None, mtu=None, bridged=True, options={'blockingdhcp':
'true', 'UUID': 'e121a99a-994e-479d-8de1-a56c14315545', 'USERCTL':
'no',
'DNS2': '172.19.1.18', 'DNS1': '172.19.1.12', 'onboot': 'yes',
'IPV6INIT':
'no'}
libvir: Network Driver error : Network not found: no network with
matching
name 'vdsm-ovirtmgmt'
libvir: Network Driver error : Network not found: no network with
matching
name 'vdsm-ovirtmgmt'
libvir: Network Driver error : Requested operation is not valid:
cannot
set autostart for transient network
Traceback (most recent call last):
File /usr/lib64/python2.7/runpy.py, line 162, in
_run_module_as_main
__main__, fname, loader, pkg_name)
File /usr/lib64/python2.7/runpy.py, line 72, in _run_code
exec code in run_globals
File /usr/share/vdsm/configNetwork.py, line
[Users] Question about network card order
Hello My first email on the mailing, I hope the first one of a longue serie. The email concerns a Network Card order issue for which I like to report a have your advises. I've made a template which contains 2 network cards, Each one bridge on different vlan network. When I create a VM from this template, the network card mac address assignation is random... so that by default my fedora assign eth0 to the smallest mac address, and so on for eth1/eth2 ... But no way to define network card order in template, so that sometime the smallest mac address is on eth0, sometime on eth1 (and in fact more often on eth1), sometime my VM works, sometime I have to destroy and recreate network interfaces. Is there a workaround or anything else ? Thanks Kévin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Question about network card order
Thanks for your reply. 2012/10/3 Igor Lvovsky ilvov...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, October 3, 2012 9:58:44 AM Subject: [Users] Question about network card order Hello My first email on the mailing, I hope the first one of a longue serie. Welcome to community :) The email concerns a Network Card order issue for which I like to report a have your advises. I've made a template which contains 2 network cards, Each one bridge on different vlan network. When I create a VM from this template, the network card mac address assignation is random... so that by default my fedora assign eth0 to the smallest mac address, and so on for eth1/eth2 ... But no way to define network card order in template, so that sometime the smallest mac address is on eth0, sometime on eth1 (and in fact more often on eth1), sometime my VM works, sometime I have to destroy and recreate network interfaces. Unfortunately it's a known issue that related mostly to guest kernel rather than RHEV-M. This is not related to order of NICs during VM start, because RHEV-M keep the MAC assignment and even PCI address assignment same over VM reboots. The real reason hidden somewhere deep in kernel/udev behaviour. We need to understand why 2 NICs with same MAC addresses and same PCI addresses may get different names (eth0/eth1) over machine reboot. Michael, any ideas? Is there a workaround or anything else ? No, I am not aware of any workaround Regards, Igor Thanks Kévin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Question about network card order
Sur :) 2012/10/3 Simon Grinberg si...@redhat.com -- *From: *Kevin Maziere Aubry kevin.mazi...@alterway.fr *To: *Antoni Segura Puimedon asegu...@redhat.com *Cc: *Michael Tsirkin mtsir...@redhat.com, Dor Laor dl...@redhat.com, users@ovirt.org *Sent: *Wednesday, October 3, 2012 3:02:47 PM *Subject: *Re: [Users] Question about network card order The mac adress are unknown until the creation of the VM, so udev won't help here :( But after the creation of the VM and before the first run you have the option to edit/view those MAC addresses. Give whatever you want before the first run. 2012/10/3 Antoni Segura Puimedon asegu...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Igor Lvovsky ilvov...@redhat.com Cc: Dor Laor dl...@redhat.com, Michael Tsirkin mtsir...@redhat.com, users@ovirt.org Sent: Wednesday, October 3, 2012 8:35:04 AM Subject: Re: [Users] Question about network card order Thanks for your reply. 2012/10/3 Igor Lvovsky ilvov...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, October 3, 2012 9:58:44 AM Subject: [Users] Question about network card order Hello My first email on the mailing, I hope the first one of a longue serie. Welcome to community :) The email concerns a Network Card order issue for which I like to report a have your advises. I've made a template which contains 2 network cards, Each one bridge on different vlan network. When I create a VM from this template, the network card mac address assignation is random... so that by default my fedora assign eth0 to the smallest mac address, and so on for eth1/eth2 ... But no way to define network card order in template, so that sometime the smallest mac address is on eth0, sometime on eth1 (and in fact more often on eth1), sometime my VM works, sometime I have to destroy and recreate network interfaces. Unfortunately it's a known issue that related mostly to guest kernel rather than RHEV-M. This is not related to order of NICs during VM start, because RHEV-M keep the MAC assignment and even PCI address assignment same over VM reboots. The real reason hidden somewhere deep in kernel/udev behaviour. We need to understand why 2 NICs with same MAC addresses and same PCI addresses may get different names (eth0/eth1) over machine reboot. Michael, any ideas? Is there a workaround or anything else ? No, I am not aware of any workaround Wouldn't it be possible to write some matching rules in: /etc/udev/rules.d/70-persistent-net.rules for your template so you would have it consistent. Mind that you should not rename to the kernel eth namespace. Best, Toni Regards, Igor Thanks Kévin -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
