Still trying to get a single server hosted engine setup running at Hetzner.de...
If I use the HE Appliance and do not use cloud-init the VM launches but can not
be accessed.
[ INFO ] Detecting available oVirt engine appliances
The following appliance have been found on your system:
Hi,
- Derek Atkins wrote:
> Hi,
>
> On Thu, December 8, 2016 11:15 am, Mark Steckel wrote:
> >
> > - Derek Atkins wrote:
> >> Hi,
> >>
> >> Mark Steckel writes:
> >>
> >> > Am I missing and or just misunderstandin
- Derek Atkins wrote:
> Hi,
>
> Mark Steckel writes:
>
> > Am I missing and or just misunderstanding something here?
> >
> > Oh, and does ip_forwarding need to be set in the kernel? (ie
> > net.ipv4.ip_forward=1)
>
> If you expect the host to ac
[Apologize. Accidentally hit send instead of save. Continuing below...]
> - Yedidyah Bar David wrote:
> > On Thu, Dec 8, 2016 at 12:42 AM, Mark Steckel wrote:
> > > Hi,
> > >
> > > OK, I reset things and tried again but was more more careful regarding
- Yedidyah Bar David wrote:
> On Thu, Dec 8, 2016 at 12:42 AM, Mark Steckel wrote:
> > Hi,
> >
> > OK, I reset things and tried again but was more more careful regarding the
> > DNS setup which I believe was correct this. In other words, the FQDNs were
> >
e appliance -- I ran my own CentOS
> install on the engine. The logs imply it's suggesting you can access the
> engine VM console, but maybe it's exiting quickly?
>
> -derek
>
> On Wed, December 7, 2016 3:52 pm, Mark Steckel wrote:
> > I tested dnsmasq from the host by
&g
VM and test from there?
> Maybe set up *real* DNS?
>
> -derek
>
> On Wed, December 7, 2016 3:41 pm, Mark Steckel wrote:
> > Hi Derek,
> >
> > - Derek Atkins wrote:
> >> Hi Mark,
> >>
> >> The error is correct, hosted-engine-1.pc
e local dns and to read from
/etc/hosts for hosted-engine-1.pcstrac.com.
The only thing I think I flubbed was neglecting to add the host's IP to the
host's /etc/resolv.conf.
Scrubbing and staring again.
Mark
>
> -derek
>
> On Wed, December 7, 2016 3:13 pm, Mark Steckel w
Folks,
Thanks to Didi in another thread I'm making progress. (Lesson learned, choose
'disk' and not 'cdrom' when using the he-appliance.)
So I reset to a fresh CentOS 7, installed various software packages including
ovirt.
I configed eth0 with a /32 public IP. I also added an alias for a x.x.x
- Yedidyah Bar David wrote:
> On Wed, Dec 7, 2016 at 4:46 PM, Mark Steckel wrote:
> > Log attached.
> >
> > - Yedidyah Bar David wrote:
> >> On Wed, Dec 7, 2016 at 4:36 PM, Mark Steckel wrote:
> >> > Folks,
> >> >
> >> >
Log attached.
- Yedidyah Bar David wrote:
> On Wed, Dec 7, 2016 at 4:36 PM, Mark Steckel wrote:
> > Folks,
> >
> > I executed "hosted-engine --deploy" on a fresh CentOS 7.2 install. Before
> > executing the cmd I also installed the he-appliance. (Also
Folks,
I executed "hosted-engine --deploy" on a fresh CentOS 7.2 install. Before
executing the cmd I also installed the he-appliance. (Also ran yum update,
installed a few packages and rebooted before doing the hosted engine deploy.)
The process seems to go well but then it hangs here:
ne --deploy" is executed?
- Yedidyah Bar David wrote:
> On Wed, Dec 7, 2016 at 11:36 AM, Mark Steckel wrote:
> > Marcin,
> >
> > - Marcin Mirecki wrote:
> >> Mark,
> >>
> >> > Enter the name which will be used to iden
gt;
> Marcin
>
>
> - Original Message -
> > From: "Mark Steckel"
> > To: users@ovirt.org
> > Sent: Wednesday, December 7, 2016 6:08:38 AM
> > Subject: [ovirt-users] Hosted-engine --deploy FQDN questions
> >
> > Folks,
> >
Folks,
I'm an OVirt newbie having troubles setting up my first Hosted Engine and am
stumbling. In this case I think it may be because of the following two set-up
questions.
Enter the name which will be used to identify this host inside the
Administrator Portal [hosted_engine_1]:
rted working.
Now I just need to figure out how to configure the /29 for the VMs.
Thanks
Mark
- Derek Atkins wrote:
> Hi,
>
> On Mon, November 21, 2016 4:30 pm, Mark Steckel wrote:
> >
> [snip]
> >> >> > Advice so far seems to be:
> >> >&
- Derek Atkins wrote:
> Hi,
>
> On Mon, November 21, 2016 4:21 pm, Mark Steckel wrote:
> >
> > - Derek Atkins wrote:
> >> Hi,
> >>
> >> Mark Steckel writes:
> >>
> >> > Thanks all who have responded so far.
> >
- Derek Atkins wrote:
> Hi,
>
> Mark Steckel writes:
>
> > Thanks all who have responded so far.
> >
> > Advice so far seems to be:
> > * Use 'screen' when deploying. Easy
> > * Don't use/disable Network-Manager. Easy
&g
Thanks all who have responded so far.
Advice so far seems to be:
* Use 'screen' when deploying. Easy
* Don't use/disable Network-Manager. Easy
* Preconfigure the ovirtmgmt bridge. I've got questions...
The server has a public /32 as the primary IP, and a public /29 which will be
used for the VMs
- Yedidyah Bar David wrote:
> On Sat, Nov 19, 2016 at 11:28 AM, Joop wrote:
> > On 18-11-2016 23:47, Mark Steckel wrote:
> >> Hi folks,
> >>
> >> I'm a complete OVirt newbie trying to set up a self hosted, single server
> >> and looking for
Hi folks,
I'm a complete OVirt newbie trying to set up a self hosted, single server and
looking for some pointers to get going... (While new to OVirt, I'm long time
sysadmin so not totally clueless.)
The server I'm using has a 4-core CPU, 64 GB of ram, and a pair of 500 GB SSDs
set up with RAI
21 matches
Mail list logo
