Am 31.03.14 11:39, schrieb Peter Münster:
What about integrating the jumpplay-patch
(http://www.vdr-wiki.de/wiki/index.php/Jumpplay-patch) into the
VDR developer version?
I wish the patch whould not stop the playback on the last mark, as the
last mark is in many cases not correct.
Gruß,
Am 31.03.14 12:19, schrieb Peter Münster:
Why is the last mark not correct?
hehe, ask noad ;)
What about adjusting the last mark?
What about removing the last mark?
What about a setup-parameter jumpplay-dont-stop-on-last-mark?
I prefer a parameter to disable the end on the last mark.
Am 31.03.14 22:03, schrieb VDR User:
Btw, instead of asking Klaus to create workarounds for noad problems,
why not ask the author of noad to fix his plugin? I'm sure Klaus would
suggest the same after stating there's zero chance he will add a
specialworkaroundforwrongmarkfromnoadparameter.
Am 27.02.13 11:56, schrieb Peter Münster:
Support for seeing the VDR osd over mplayer doesn't exist yet.
I use xineliboutput with a nvidia on-board graphic card to replay all
kind of video without problems (SD and HD).
Matthias
--
Programming today is a race between software engineers
Am 27.02.13 23:01, schrieb Peter Münster:
I use xineliboutput too, but it crashes too often. See also
http://article.gmane.org/gmane.linux.vdr/47161
I used gentoo without problems and now yavdr without problems. It never
crashed so it is related to the version/distribution or to your hardware
Am 16.02.13 14:09, schrieb th_zieg...@gmx.de:
Any other hints regarding what USB DVB-S receiver, sat-dish, etc.
works well is also welcome.
as sat-dish I can recommend kathrein (90cm) with kathrein LNB. Is maybe
more expensive than other companies, but you get the quality you pay. As
Dear Art,
Am 11.10.11 09:54, schrieb Arturo Martinez:
Can somebody recommend a cheap usb or serial remote control for a VDR
dedicated box (with kernel 3.x installed)
I use this one here:
Hauppauge MC Remote Control Kit Fernbedienung - Infrarot
Works out of the box with lirc or the kernel
On 22.03.11 21:03, Udo Richter wrote:
The setup.conf option is DumpNaluFill=0 or 1.
thanks, I will give it a test phase.
One question here, if I shrink already existing recordings with the
command line tool, is it necessary to delete the index?
However I'd suggest you should run your VDR
On 20.02.11 21:31, Udo Richter wrote:
I've uploaded the final patch version of the h.264 NALU fill removal for
VDR 1.7.16.
which config parameter I must set in the setup.conf to enable this
patch? (I have no video output on my recording machine, so OSD is not
working)
Thanks,
Matthias
--
Am 14.10.10 12:01, schrieb Arturo Martinez:
Could somebody tell me how could I implement this within vdr, so I
select 'Commands' and then the file to be converted and either it calls
the bash script to do the job or otherwise converts it using the same
parameters?
check the file MANUAL in the
Am 30.08.10 02:05, schrieb Simon Baxter:
I have the same problem (transfer mode stopping) with plain VDR (no
plugins) and a FF card.
i.e. works fine in vdr-1.7.(=)11 but not in vdr-1.7.(=12)
have you upgraded the firmware for your FF card, too?
Bye,
Matthias
--
Programming today is a race
Hi,
Am 26.08.10 12:16, schrieb Laz:
Then my old TV blew up and I now have a full-HD LCD TV. I've been using
the same setup with the new TV and it still works pretty well for the SD
signals I can currently receive.
if you new LCD with HDMI use it to connect your HDMI output of the ION
board
Am 24.08.10 16:35, schrieb Tony Houghton:
It depends on whether the Ion2 can generate the modelines you need.
You'll have to check around for that. I expect most people buying new
hardware like this would already have an LCD TV by now, so the info
could be hard to find :-(.
hm, here you are
Hi Thomas,
Am 25.08.2010 18:33, schrieb Thomas Hilber:
AFAIK all more recent (aka VDPAU compatible) nVidia graphics run VGA2SCART
flawlessly. There are found many VGA2SCART success stories at [2].
thanks, that are great news (but in the README only the ATI and Intel
cards are mentioned :) ).
Hi List,
Am 23.08.10 15:26, schrieb Tony Houghton:
[1] http://crashme.cx/vdr-portal-picts/VGA_SCART_RGB_NEWER.png
wow, that are interesting news.
Does it means I can buy a Atom board with an ION2 chip on it and can use
the VGA connector to connect my old TV till I buy a new LCD and use then
Hi,
has anyone the extrecmenu plugin working with 1.7.14 and can provide
with a patch?
Thanks,
Matthias
--
Programming today is a race between software engineers striving to build bigger and
better idiot-proof programs, and the universe trying to produce bigger and better idiots.
So far,
Hi Helmut,
Am 28.03.10 15:47, schrieb Helmut Auer:
This one is for vdr-1.7.12 but it should work with 1.7.14 also:
http://www.vdr-portal.de/board/thread.php?postid=881950#post881950
thanks, works great.
Thanks,
Matthias
--
Programming today is a race between software engineers striving
Hi,
Halim Sahin wrote:
Unfortunately softdevice development seems dead so i switched some
months ago to xineliboutput.
at first I would like to say thank you a lot to all VDR developer
especially to Klaus!
VDR is a tool I cannot live without it.
I upgraded my xineliboutput this weekend to
Am 15.01.2010 15:12, schrieb Pertti Kosunen:
~/.xine/config_xineliboutput:
audio.device.alsa_passthrough_device:hdmi:CARD=Nvidia,DEV=0
audio.output.speaker_arrangement:Pass Through
(aplay -L show correct output device name)
...
--post tvtime:use_vo_driver,cheap_mode=0...
VDPAUs
Hi,
I have now replaced my primary video with a nice Atom board and inserted
there a Tevii S470 card.
Output is via HDMI and the xineliboutput plugin.
It is working really great, thanks a lot for the really fantastic software!
But I have now a big problem.
I upgraded now from vdr 1.7.2 to
Hi Falk,
Falk Spitzberg wrote:
You need a new driver/firmware for your FF card to support TS playback.
The latest v4l drivers include the correct version. I have the same card
and it works just fine with VDR 1.7.9.
thanks a lot.
I installed a new kernel and now everything works fine.
Hi,
Karl Glatz wrote:
But what about the patches (e.g. the one which lets the app dedect
wheter it's a dvb-s2 or dvb-s card) are they included in upstream?
I do not use DVB-S2, so no need for it yet.
Thanks for your answer.
Bye,
Matthias
--
Programming today is a race between software
Hi,
is it enough for VDR 1.7.8 to install a new kernel (2.6.30) or do I need
to install dvb drivers from a seperate source?
Bye
Matthias
--
Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the universe trying to
produce
Hi Klaus,
Klaus Schmidinger schrieb:
If I knew the answer to that, I guess I wouldn't have had to write
the above statement ;-)
;)
Yeah you are right.
I think I will wait for version 1.7.5 and then I will start to test it.
Best regards
Matthias
--
Programming today is a race between
Hi Antti,
Antti Hartikainen wrote:
You haven't applied patch to the vdr core. It's included in the package.
thx for your answer.
Bye
Matthias
--
Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the universe trying to
Hello Tobias,
Tobi schrieb:
A new version of the VDR Teletext Subtitles plug-in was just released.
Downloads:
http://projects.vdr-developer.org/projects/list_files/plg-ttxtsubs
seems not to compile, I get errormessages:
video:/usr/local/video/VDR/PLUGINS/src/ttxtsubs# make
g++ -g -O2
Hi,
[EMAIL PROTECTED] schrieb:
The best solution, at my opinion, is to use the plugin vomp under vdr and run
the vompclient under windows, you will have access to channels, records and
timers
http://www.loggytronic.com/vomp.php
thanks a lot for that tip.
I tried it and now I can watch my
Hi,
Torgeir Veimo wrote:
Sorry for the noise.. Reattaching to the screen instance I instantly
realized that the cause was an erroneous video out parameter..
why not using mplayer.sh?
It is a shell script that has some additional features.
Bye,
Matthias
--
Programming today is a race
Hi,
I was now able to compile a driver and get it running with VDR 1.7.1
here a short summary:
To get the driver:
cd /usr/local/src/
mkdir hvr4000
mkdir -p hvr4000/liblianindvb-test
cd hvr4000/liblianindvb-test
hg init
hg pull http://arvdr-dev.free-x.de:8080/testdvb/
hg update
Compile the
Hi Community,
I tried these days to migrate to the new driver structure and VDR 1.7
(to later get the HVR4000 running).
The driver I used is:
http://liplianindvb.sourceforge.net/cgi-bin/hgwebdir.cgi/liplianindvb/
To compile the driver I copied compiler.h from the kernel source to the
driver
Hi Siegfried,
Siegfried Haas wrote:
I´m using vdr1.4.7 on a Suse10.3 with one FF-DVB-S-Card (technotrend
rev.1.3) and one budget DVB-T (winTV nova).
Everything worked well until yesterday.
When I turned on the TV there was no output on the TV and when one timer
started recording vdr
Hi Martin,
Martin Emrich wrote:
Looks that way. With this hot weather in Germany at the moment: maybe
the cards just get too hot?
could be the problem. In fact the DVB-S cards are getting really hot.
Maybe it's better to install a cooling on them?
Would it be an option to buy a budget card?
Hi,
I have here an old VDR system running and my DVB-S cards are stopping to
work now (VDR 1.6 and 2xDVB-S cards).
It starts with a lot of distortions and then they stops to record
completely. I have only 0 minute records for my new timers.
In the log file I have:
Jul 6 14:25:24 video vdr:
Hi,
Klaus Schmidinger wrote:
Should there be a stable version 1.6.0 now, based on what's in
version 1.5.14, but without DVB-S2 or even H.264 support?
yes
Best regards,
Matthias
--
Programming today is a race between software engineers striving to
build bigger and better idiot-proof
Hi Tony,
Tony Grant wrote:
Sorry it doesn't. I RTFM and modified Make.config and I have the error
so there is something wrong.
I have the same here but if I modify the Makefile like described before
the problem is fixed. It seems to me that the Makefile does not use DVBDIR.
Best regards,
Hi,
Igor wrote:
please, try to copy the files
from
/multiproto/linux/include/linux/dvb/version.h
/multiproto/linux/include/linux/dvb/frontend.h
to
/usr/include/linux/dvb
and recompile the VDR
ok it was really a -I Problem with the compile process.
I edited the Make.config but
Hi,
VDR User schrieb:
Ps. I'm using a copy of the Make.config example packaged with VDR.
At the end of the file you can clearly see:
### You don't need to touch the following:
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
yes you are right. My buildscript copies the file from a
Hi,
I have here the problem that vdr 1.5.10 will not run anymore. So I
tried to debug it but I had problems with it.
I ran it with gdb vdr
then inserted run
I got:
Starting program: /usr/local/video/vdr-1.5.10/vdr
Failed to read a valid object file image from memory.
[Thread debugging using
Hi Halim,
Halim Sahin wrote:
Have you installed the libstdc++...dbg and libc6...dbg packages?
yes I have installed them, but I have seen that my gentoo system
recently update these libraries and VDR was compiled against the new ones.
But my diskless client used the old one so it couldn't work.
Hi Martin,
Martin Prochnow wrote:
The icons should be displayed at the left of a list entry. Take a look
at the screenshot at plugin's homepage
(http://martins-kabuff.de/extrecmenu_en.html).
hm, ok is seems that my font is missing that icons.
As I mentioned before you need a true type font
Hi Martin,
Martin Prochnow wrote:
the plugins does not show a message if cutting is finished. As you don't
have to wait for a finished cutting process and there are also icons
that mark cutting recordings I think there is no need for it.
hm ok, maybe I have that icons not on my VDR.
Where
Hi Martin,
Martin Prochnow wrote:
I did not mentioned it: the plugin is ment for use with actual stable
VDR versions. It does compile with the current developer versions of VDR
but it does not support the new font handling or the new translation
handling.
I will not get any message if
Hi Halim,
Halim Sahin wrote:
If I write unset $LANG
all apps are producing english output.
yes that is excatly what VDR also does but if I have not defined LANG
then I'm not able to select another language in the OSD of VDR and that
is the issue I tried to address.
Everything else is fine.
Hello Anssi,
* Anssi Hannula [EMAIL PROTECTED] [22-08-07 16:33]:
Could you try what these commands print in VDR source directory:
TEXTDOMAINDIR=./locale TEXTDOMAIN=vdr LANGUAGE=de_DE gettext -s \
'LanguageName$English'
LanguageName$English
TEXTDOMAINDIR=./locale TEXTDOMAIN=vdr
Hello Anssi,
* Anssi Hannula [EMAIL PROTECTED] [23-08-07 14:56]:
Does locale/de_DE/LC_MESSAGES/vdr.mo exist in VDR directory?
yes it exists:
20 -rw-r--r-- 1 root root 18013 Aug 20 14:47 vdr.mo
What distro?
gentoo
Does the localization work in other programs, like ls --help and so on?
yes,
Hello Anssi,
* Anssi Hannula [EMAIL PROTECTED] [23-08-07 16:14]:
And when using LANGUAGE=de_DE instead of LANG=de_DE?
that does not work, ls --help keeps english with LANGUAGE=de_DE only
LANG=de_DE works.
Best regards,
Matthias
--
Programming today is a race between software engineers
Hi Anssi,
Anssi Hannula wrote:
What is the output of locale?
it says:
LANG=
LC_CTYPE=POSIX
LC_NUMERIC=POSIX
LC_TIME=POSIX
LC_COLLATE=POSIX
LC_MONETARY=POSIX
LC_MESSAGES=POSIX
LC_PAPER=POSIX
LC_NAME=POSIX
LC_ADDRESS=POSIX
LC_TELEPHONE=POSIX
LC_MEASUREMENT=POSIX
LC_IDENTIFICATION=POSIX
LC_ALL=
I
Hi Klaus,
Klaus Schmidinger wrote:
I don't really want anything in particular here ;-)
:)
All I want is that the gettext() calls deliver the right
texts.
my it is some your your ToDo list.
- Fix the problem that a user cannot select a language in VDR if no LANG
is defined on the shell
- or
Hi Luca,
Luca Olivetti wrote:
That shouldn't be necessary with 1.5.8: I only have 3 locales installed
but I can select all languages from the osd setup menu (and see the
corresponding translations).
hm, that is strange. I have here a vanilla VDR (with some plugins but
the sourcecode of VDR
Hi Udo,
Udo Richter wrote:
Post the output of locale -a. You may need to install missing locales,
check your distribution on how to.
hm, that is a really long list, I deleted many lines and kept only the
hopefully relevant stuff:
C
POSIX
...
de_AT.utf8
[EMAIL PROTECTED]
de_BE
de_BE.utf8
Hi Halim,
Halim Sahin wrote:
cp Make.config.template Make.config
edit it and set LOCDIR=./locale
ok I changed it, now VDR says at startup:
Aug 20 14:53:36 localhost vdr: [23028] found 21 locales in ./locale
Aug 20 14:53:36 localhost vdr: [23028] no locale for language code 'deu,ger'
Aug 20
Hi Matthias,
Matthias Schwarzott wrote:
General question: Why is the locale dir called de_DE and not just de - as
that
seems what most other programs on my system do?
because German is spoken in more then one country: de_DE, de_AT and I
think de_CH and more. I havn't not list with all
Hi,
I'm not sure what I changed but I thing that after Pro7 had changed the
frequency the problem with distortions in recordings started.
The new channel line is:
ProSieben;ProSiebenSat.1:12544:hC56:S19.2E:22000:511:512=deu;515=deu:33:0:17501:1:1107:0
I have running VDR 1.4.7.
It is a dual
Hi Frank,
Frank Schmirler schrieb:
This is a known issue with version 0.0.1. Please make sure that plugin
svdrpservice is loaded before remotetimers (i.e. vdr -Psvdrpservice
-Premotetimers) or apply remotetimers-svdrpservice.diff which is available on
http://vdr.schmirler.de/.
oh good to
Hello Stone,
* Stone [EMAIL PROTECTED] [13-02-07 18:44]:
Has anyone noticed that the timeline page in vdradmin does not work with
the new IE7? Anyone know of a workaround?
With Firefox is everything fine, so I think it is a bug in IE7. Easily
use Firefox and everthing is fine.
Best regards,
Hi
I have TELE 5 now on number 12 (moved with the VDR channel editor to
this place).
But if I try now to programm a timer in the following way:
Menu - Program - red button I see on channel 609 TELE 5 and not 12
TELE5
The line in channel.conf is:
TELE
Hello Oliver,
* Oliver Endriss [EMAIL PROTECTED] [07-12-06 05:23]:
Which firmware revision are you using? If you are running a xx2623 test
version you should update to the latest one (F22623).
thx. I updated to the new test firmware f42623 and the problem is
solved.
Best regards,
Matthias
--
Hi,
I updated these days my system from kernel 2.6.15.4 to 2.6.19 and now
every movie on every program is now in 16:9 even the movies which had
been 4:3 before.
Is there something broken in the driver from the kernel or is it a
problem with the firmware or VDR?
I have VDR 1.4.4 running and 2xFF
Hi,
I have the problem that VDR deletes directories in my /video0 or
/video1 ... which not belongs to VDR.
I use vdrconvert to convert my VDR recordings to DVDs so I have a
directory /video1/filme which VDR deletes and vdrconvert breaks.
Is it possible to deny the delete of this directory?
59 matches
Mail list logo