University of Missouri Acquires Energetics LENR
Resources
http://news.newenergytimes.net/2012/10/24/university-of-missouri-acquires-energetics-lenr/
Oct. 24, 2012 By Steven B. Krivit
New Jersey-based Energetics Technologies LLC and its founders appear
to be out of the low-energy nuclear
At 09:05 AM 10/25/2012, OrionWorks - Steven V Johnson wrote:
That does seem to be Rossi's prior track record - to constantly
titillate his audience.
Many of his commercial hints have failed to materialize, or have
fizzled (big US company etc ..) -- but most of his technical hints
have
At 11:36 AM 10/21/2012, Jed Rothwell wrote:
Mark Gibbs
mgi...@gibbs.com
wrote:
I don't have the time to review the huge amount of literature you
people have already looked at ...
I'm still willing to do some leg-work on this (I'm collecting links, and
will order Ed Storms' book) -- but
Another warning on electrolysis and stuff
http://www.iscmns.org/CMNS/JCMNS-Vol9.pdf p64
Lakshmanan
During sodium metal dissolution in aqueous Epsom salts, it was
accidentally discovered that a massive explosion occurs in 0.85 M
Epsom solution on the completion of Na dissolution. ...
However, at
Seeing that we have this thread going :
Joseph Fine
October 25th, 2012 at 1:27 PM
Andrea Rossi,
You said you will soon provide information about the new 1 MW Hot Cat.
I have not yet made a volume estimate of the Hot-Cat (1 MW).
But I think the 1 MW Hot Cat will have 90 to 100 modules.
Some
Popsci :
If history is any guide, no such report would be issued. Rossi will reset
the goalpoststhe only thing he does with any consistencyand forestall
his day of reckoning for another few months, and then another few months
after that, until finally he disappears from the stage in a puff of
At 09:05 AM 10/23/2012, Akira Shirakawa wrote:
Hello group,
The 8-page article published on the November issue of Popular
Science is now publicly available for reading on the official PopSci
website. For sure, user reactions in the comment section don't seem
very enthusiastic, to say the
At 11:26 AM 10/23/2012, Jed Rothwell wrote:
I uploaded a version of this
paper with some revisions and corrections.
http://lenr-canr.org/acrobat/StormsEnatureofen.pdf
I had to read it several times to figure out the relationship between
GM#1 and GM#2.
Let me summarize my current understanding
At 12:36 PM 10/23/2012, Jed Rothwell wrote:
I uploaded a post with links to
all three articles and eCat news, conveniently located in one place:
http://lenr-canr.org/wordpress/?p=1356
You might add Wired's Sep 14 --- now archived
Cold fusion: smoke and mirrors, or raising a head of
steam?
At 11:01 AM 10/19/2012, Alan J Fletcher wrote:
Unfortunately, the result is only that it SUGGESTS a COP of 1
Since Defkalion specs have COP in the 20-30 range this seems rather
disappointing.
The blog goes on to say :
The objective of this test was to get only COP1.1 with a noise
http://www.amazon.com/Avery-Durable-Binder-EZ-Turn-17032/product-reviews/B001B0CTMU/ref=cm_cr_pr_btm_link_2?ie=UTF8pageNumber=2showViewpoints=0
(lenr.qumbu.com -- analyzing the Rossi/Focardi eCat -- and the
defkalion hyperion -- Hi, google!)
http://pesn.com/2012/10/16/9602208_Andrea-Rossis_Black-Box--by_Popular-Science/
With thumbnails of the article and a few comments (Not a hit piece,
but with inaccuracies).
At 11:30 AM 10/16/2012, David Roberson wrote:
I know
that I will have sparks and small flames as with the open system so now I
would like to know if there is significant danger of explosion. Is
anyone aware of reports of a relatively low volume open to the air glass
cell exploding and causing
At 09:36 AM 10/12/2012, Terry Blanton wrote:
http://www.e-catworld.com/2012/10/leonardo-corp-releases-new-hot-cat-report/
Electrical measurements : pce-830
http://www.industrial-needs.com/manual/power-anlayser-pce-830.pdf
Andrea Rossi
October 12th, 2012 at 3:27 PM
DEAR READERS:
THIS MORNING I SENT TO THE SPECIALIZED MAGAZINES THE TEXT OF MY REPORT.
UNFORTUNATELY, I CLICKED THE WRONG ADDRESS, AND SENT THE DRAFT FULL OF
TYPOS, WITH NONSENSE NUMBERS. I AM JUST RETURNED FROM PORDENONE AND
REALIZED THIS !!! ( IT IS
At 07:51 AM 10/4/2012, Jeff Berkowitz wrote:
This morning I found a link that
may be related to the borax and nickels thing:
http://www.sparkbangbuzz.com/els/borax-el.htm
A great find! Here's Popular Science 1936 :
Whats up with a new E-CAT
Meeting Scheduled for Pordenone, Italy on Oct 12.
http://www.journal-of-nuclear-physics.com/?p=733cpage=7#comment-343916
Andrea Rossi
October 2nd, 2012 at 3:17 PM
Dear Steven N. Karels:
Your question is inspiring: well, I will not go to Pordenone to clean the
At 12:33 PM 10/4/2012, Mark Gibbs wrote:
The clean of the tops of
the Dolomites with the wax and the he-he-ing seem unusually odd
even for Rossi ... Does anyone know if the former is a bad translation of
a colloquialism?
I took it to mean skiing : (wiki) A tourist mecca, the Dolomites
are famous
At 07:57 AM 10/2/2012, fznidar...@aol.com wrote:
It has
now been one year since Rossi's big demonstration. Products were to
come out at the end of last year, then in the Summer of 2012. Now
its one year later and there is nothing. No products, no
independent tests by a reputable group.
From:
Disclaimer : I'm TOTALLY out of my sphere of competence here.
Most WLT-disprovers bring the electron from infinity (or Mars) and
collide it with the Proton.
But I think they need to look at the naturally occurring Electron
Capture.
http://en.wikipedia.org/wiki/Electron_capture
eg A proton in
Since I don't yet have a wet environment I
unpacked and set up my power supply.
Like this one
:
http://www.ebay.com/itm/Precision-Variable-Adjustable-30V-5A-DC-Power-Supply-Digital-Regulated-Lab-Grade-/150910739194?pt=LH_DefaultDomain_0hash=item2322fb22fa
(gee .. there's one like it for 50c
The manual is ... Chinese and Chinglish :
*regulator / steady flow characteristics
The series features the work of power as the voltage regulator /
converter-type automatic steady flow, it changes with the load
Regulators with the state of steady flow between the consecutive
conversion,
Replicators :
I plan to hold my 2 nickels vertically, and only partly immersed in
the Borax (so that all connections are above the fluid).
How far apart should they be?
I saw elsewhere that all Australian silver coins are also
nickel-copper :(maybe swedish, too) : A big coin would be
At 11:17 AM 9/27/2012, Alan J Fletcher wrote:
I saw elsewhere that all Australian silver coins are also
nickel-copper :(maybe swedish, too) : A big coin would be easier to
connect than a nickel.
US 10c : 21 mm diameter
AUS 20c : 28mm
SW 1KR : 25mm
I think I'll stop by a coin dealer and see
At 02:18 PM 9/27/2012, David Roberson wrote:
I also
placed my connections above the bath. With Borax, they had to be
fairly close together to get 1 amp. I estimate from memory about
1/2 inch maximum.
Thanks --- have you observed HOT NICKELS yet?
Power supply : got (The manual's Chinese, with an .. interesting
English translation)
There are knobs for current and power. I guess I'll have to
twiddle them to see how they interact
Bunch of alligator clips : got
Cooking thermometer : got
Radiation detectors : ordered
I ordered a 5-pack.
I've been looking through my personal archives.
I declared on Wed Apr 22, 2009 02:07pm
I'm changing my position from 'maybe' to 'yes'.
and came across a Jed quote :
Wednesday, March 24, 2010
Chemists taken in by Cold Fusion . . . AGAIN!
I found Miles at the 2010 ACS reporting 6/6 (Though for my purposes
his $50 calorimeter got the press's attention).
At 01:02 PM 9/25/2012, Jed Rothwell wrote:
They described a lot more about it at ICCF17. Kidwell finally agrees
it is anomalous.
Does Kidwell say so in a paper?
http://www.defkalion-energy.com/forum/viewtopic.php?f=4t=1303p=9562#p9562
Dear drew,
we do not know where Sterling Allen got this not-even-close-to-real
info on his last report. Please be so kind to ask him as he has not
contacted us since last March, when he payed a short visit in one of our
I think these are Chuck's first posts on usenet
:
5/4/89
https://groups.google.com/forum/?hl=enfromgroups=#!topic/alt.fusion/BwPLHQ2lO
TE
...
Using these ideas, here is a basement physics experiment,
I've tried
(It's only sugjested as possible way to see cold fusion if B2H-- is
doing as I
At 02:05 PM 9/24/2012, Alan J Fletcher wrote:
I think these are Chuck's first posts on usenet :
5/4/89
That would be 5/14/89
I just won a 0-30V 5A power supply on eBay. Now I need to save up
for a coup'la nickels.
(I really AM going to scoop up some free Borax!)
At 01:17 PM 9/21/2012, Alain Sepeda wrote:
Just an announce for contributors, this is an idea about making a
wiki on LENR...
I'll come over to the dark light side if I'm thrown off the CF
and ECAT wikis. Otherwise I'm too busy pushing rocks up hills.
At 04:14 PM 9/21/2012, Jeff Berkowitz wrote:
I got email on the from a lurker about this too. Agree. In an
electrolytic cell, the cathode is the one connected to the negative
terminal of the power supply, and this is the business end for H2.
And with AC the ends will alternate?
At 12:25 PM 9/19/2012, Jones Beene wrote:
If I had a nickel for every time ...
So ... with that caveat in mind, here's a cheap tip about what to do with
another cheap tip - all those Buffalo coins you've been saving for the meter
... IOW - there is a ready source of Romanowski alloy for Celani
I saw your post of that old email, and was kind of embarrassed to see I
left out a few details, like my reasoning for Ni and Borax. At the time, I
knew Ni to be a good catalyst for some hydrogen reactions, an could
absorb good amounts of H into the lattice. Borax is used as a flux
for
At 01:25 PM 9/20/2012, Jones Beene wrote:
OK Chuck, I'll bite on the AC and nickels.
I asked Chuck if there are any dangers ... since he's still around 30
years later, and had a geiger counter, I presume the neutron flux
wasn't too high.
Heck, if this works it could be interesting.
http://www.iscmns.org/news.htm
JCMNS Volumes 6 to 9 published
14 September 2012: Editor in Chief Jean Paul Biberian has
released another volume of the peer reviewed
Journal of
Condensed Matter Nuclear Science.
JCMNS-Vol6.pdf
.
JCMNS-Vol7.pdf
.
JCMNS-Vol8.pdf
contains the first part of the
Is this the first paper in which one group has reported100% success in
multiple tests (over 150)?
http://newenergytimes.com/v2/conferences/2012/ICCF17/ICCF-17-Godes-Controlled-Electron-Capture-Paper.pdf
(I'm using that link because it's in the wired article).
(lenr.qumbu.com -- analyzing the
At 11:06 AM 9/13/2012, Alan J Fletcher wrote:
http://en.wikipedia.org/wiki/Wikipedia:Articles_for_deletion/Energy_Catalyzer_(2nd_nomination)#Energy_Catalyzer
It survived deletion, despite complaints that:
Off wiki mailing list by Alanf777, Zedshort and others here:
(vortex)
which seems
Andrea Rossi
September 17th, 2012 at 7:02 AM
DEAR GIO:
I WANT TO ADD THAT SO FAR THE MEASUREMENTS MADE BY NEW SYSTEMS HAVE
CONFIRMED, SUBSTANTIALLY, THE DATA PRESENTED IN THE REPORT OF ZURICH. IN
PARTICULAR: WE HAVE ELIMINATED THE INTERNAL CYLINDER, TO MAKE EASIER THE
MEASUREMENT OF THE
Cold fusion: smoke and mirrors, or raising a head of steam?
http://www.wired.co.uk/news/archive/2012-09/14/cold-fusion
I've only skimmed it.
(lenr.qumbu.com -- analyzing the Rossi/Focardi eCat -- and the
defkalion hyperion -- Hi, google!)
At 10:26 AM 9/14/2012, Alan J Fletcher wrote:
http://www.wired.co.uk/news/archive/2012-09/14/cold-fusion
I've only skimmed it.
Lots of Krivit
ps : Steven Vincent Johnson already had it up. but it wasn't (still
isn't) showing on the web archive.
At 10:33 AM 9/14/2012, Alan J Fletcher wrote:
http://www.wired.co.uk/news/archive/2012-09/14/cold-fusion
I've only skimmed it.
I put a summary up on the wiki. I doubt that it will survive editing.
At 11:22 AM 9/14/2012, Alan J Fletcher wrote:
http://www.wired.co.uk/news/archive/2012-09/14/cold-fusion
I put a summary up on the wiki. I doubt that it will survive editing.
Deleted already.
At 12:31 PM 9/14/2012, Jed Rothwell wrote:
Like I sez, you got no business in Wikipedia. I mean, what? -- are
you asking to be collapsed and arbitrated?
Just out of curiosity, how long did it take them to delete this?
They stay on their toes!
I warned them in Talk that there was a wired
At 12:47 PM 9/14/2012, James Bowery wrote:
2 minutes:
I've got to learn to scroll before I post.
btw The Lede currently ends with an extended quoted from Ugo Bardi (From
March)
Professor Ugo Bardi of the University of Florence, noting contradictory
claims made by Rossi regarding the emission or
At 04:18 PM 9/14/2012, Abd ul-Rahman Lomax wrote:
Well, very funny, Jed. However,
Mr. Fletcher is essentially clueless as to what would be acceptable as a
source for Wikipedia. I looked about and didn't see where he was
threatened with arbitration, which is weird. The last thing
that the cabal
At 03:33 PM 9/14/2012, Alan J Fletcher wrote:
I remember now why I gave up in December last year. But I thought it
was my turn to put in a shift or two at the coalface (or whatever).
I'm now getting my feet wet in Cold Fusion ... let's see how quick
THEY are. (Some of the players are the same).
Andrea Rossi
September 13th, 2012 at 1:45 AM
Dear Giuseppe B.:
Mr Gary Wright ( a false name that the coward snake The Snake- is
using for cowardice, has contacted SGS in an unproper way and has put an
unproper question.
So he published on his newbogusenergybricolage that we do not have a
At 08:53 AM 9/13/2012, Akira Shirakawa wrote:
http://www.youtube.com/watch?v=euNzXkapqwQ
(the video is 39:34 minutes long)
These let the camera run interviews make me appreciate the work of
a good editor.
I went with a non-snarky fairly neutral wait and see
response:
http://en.wikipedia.org/wiki/Wikipedia:Articles_for_deletion/Energy_Catalyzer_(2nd_nomination)#Energy_Catalyzer
Keep Although the eCat has not achieved mainstream media
attention, there is sufficient
Non-WP:RS
evidence that things
At 12:55 PM 9/13/2012, Akira Shirakawa wrote:
On 2012-09-12 23:04, Harry Veeder wrote:
This blog called Shut down Rossi can't find any evidence that safety
certificate was issue by SGS as Rossi claims.
Here's the safety certificate by SGS:
http://www.scribd.com/doc/105839897/EFA-rep-1107
At 01:19 PM 9/13/2012, Alan J Fletcher wrote:
I gleefully added it to the wiki (and deletion discussion) !!!
Of course it's been deleted already as a primary source with zero relevance
Now for the questions -- the certificate states 200kW IN, 1MW out --
does the certification confirm those numbers?
At 01:42 PM 9/13/2012, Alan J Fletcher wrote:
Now for the questions -- the certificate states 200kW IN, 1MW out --
does the certification confirm those numbers?
The directive is at
http://eur-lex.europa.eu/smartapi/cgi/sga_doc?smartapi!celexplus!prod!CELEXnumdoclg=ENnumdoc=32006L0032
At 02:03 PM 9/13/2012, Wolf Fischer wrote:
Still - didn't SGS have to test this prototype in some way to find
out if it runs within their safety parameters? How did they run these tests?
Here's a clear copy as a PDF file : (I'd only seen the jpg)
Thanks to AK for the correct link (which I'd already fixed on the
wiki -- though even my comments in talk have been collapsed -- and
I'm being threatened with arbitration.)
Article 5 and Annex I indicate that this is at least a pre-requisite
for commercial sale, and that other regulations may
At 02:58 PM 9/13/2012, Craig Haynie wrote:
Can someone confirm the power output? The certificate says:
Power In: 200 kw (max) Power Out: 1MW
Water flow rate: 1500 kg/hr Temperature in: 85C Temperature out: 120C
As AK pointed out, this particular certificate doesn't certify the
http://pesn.com/2012/09/11/9602180_2012_E-Cat_Conference_Report--1_MW_E-Cat_Ready/
(plus other links).
Biggest news/ leak is :
A little secret I'll let you in on is that Rossi does have
self-looped data for the Hot-Cat, but chose not to release that at
this time. Self-looped is effectively
Sterling Allen also posted a link to a video
http://peswiki.com/index.php/Directory:Bob_Rohner%27s_Noble_Gas_Engine#Plasma_Cycle_is_Not_Air_Driven
A 1-cylinder Papp is assembled from scratch, charged with gas and
operated.
http://www.youtube.com/watch?v=0fd-coQ84XU
The cylinder fires against
Also note the paragraph at the end :
It is important to make a clear distinction between high temperature
prototype, which test measurement has been made, and the recent
safety certified 1 MW plant. We work for a separate validation of
the 1 MW plant full operation, says Magnus Holm
The page is up for formal deletion.
http://en.wikipedia.org/wiki/Wikipedia:Articles_for_deletion/Energy_Catalyzer_(2nd_nomination)
I haven't decided yet whether to vote for Delete or Keep. I'll
probably go with a snarky Keep.
Andrea Rossi
September 10th, 2012 at 3:14 PM
DEAR READERS:
TODAY A BIG MESS IS POPPED OUT FROM A SHORT MEASUREMENT THAT HAS BEEN
DONE THE LAST WEEK. I REALLY HAVE DIFFICULTY TO UNDERSTAND WHY SOME
PERSONS HAVE TOTALLY IGNORED WHAT I CLEARLY SAID IN MY PRELIMINAR
STATEMENT IN THE REPORT
http://drmyronevans.wordpress.com/2012/09/10/e-cat-congress-in-zurich/
In a message dated 10/09/2012 11:30:41 GMT Daylight Time, [Horst ]
writes:
I am back now from the congress. This was a big succuss with about
200 participants. Rossi attended all sessions and gave an extensive
evening
At 04:01 PM 9/10/2012, Alan J Fletcher wrote:
http://drmyronevans.wordpress.com/2012/09/10/e-cat-congress-in-zurich/
Evans seems to be associated with Unified Field Theory stuff
... Horst = H. Eckardt, Ph.D. (Munich)
http://www.aias.us/index.php?goto=showPageByTitlepageTitle=Home
http
I only just found out that Mats now has his own magazine (as managing
editor) :
http://matslew.wordpress.com/2012/06/20/we-just-launched-next-magasin-on-how-technologys-changing-the-world
A few days ago we finally launched
Next Magasin a new magazine on
how technologys changing the world
More tea-leaf reading : problems with the domestic certification
?
Andrea Rossi
August 31st, 2012 at 9:34 AM
Dear Koen Vandewalle:
We have all the resources necessary for a development of our technology,
based on our businessplant. I do not think we will have delays as for the
industrial
At 12:50 PM 8/30/2012, Axil Axil wrote:
Michael McKubre said that the reason
he believes completely in the reality of the Papp engine reaction for the
last 14 years is that Papp ran a full demo of his engine in front of
patent examiners to their total satisfaction using a dynamometer
it
worked
At 09:31 AM 8/21/2012, Abd ul-Rahman Lomax wrote:
Folks, if you are not prepared to lose $350, plus more (for the fuel
and to actually build a piston/cylinder) don't buy one of those
kits. There is a high risk, from the history of this field. Caveat emptor.
I'd be happy to contribute a small
If you're registered on DGT forum you need to check your messages for
instructions on how to keep your registration
(They apparently sent 5 messages which they deleted before being read)
At 01:17 PM 8/17/2012, Abd ul-Rahman Lomax wrote:
At 10:24 PM 8/16/2012, you wrote:
https://docs.google.com/presentation/d/1SOA7Z4aIGnT_HrshnzNF6vTsgj4PULTBceDyUINIZG8/edit
They quietly endorse Widom-Larsen :
A Hamiltonian with ⥠782keV can cause a
proton to capture an electron to yield
At 01:17 PM 8/17/2012, you wrote:
They quietly endorse Widom-Larsen :
Unreadable for me. Krivit is making a Big Deal out of this
presentation, and McKubre's co-authorship. I rather doubt that
McKubre has reversed his position on neutrons. It is not clear at
all that co-authorship represents
At 01:17 PM 8/17/2012, Abd ul-Rahman Lomax wrote:
Unreadable for me.
Full paper :
http://newenergytimes.com/v2/conferences/2012/ICCF17/ICCF-17-Godes-Controlled-Electron-Capture-Paper.pdf
Appendix A just lists a bunch of reactions ... with NO direct
reference to WL (may be in the other Godes
At 04:29 PM 8/14/2012, Michael Foster wrote:
The piston rings are rubber O-rings. There's no way in hell that
the helium in the noble gas mixture will stay in the cylinder for an
appreciable length of time.
Helium is notoriously fugitive and will escape from virtuall any
container not made of
http://www.e-catworld.com/2012/08/report-from-iccf-17/
Report from ICCF-17August 14, 2012
I thought this comment from Tyler van Houwelingen deserved to be in
separate post. Thanks Tyler!
Greetings from ICCF-17,
After seeing the DGT presentation, speaking with them and speaking with
people who
At 01:47 PM 8/14/2012, Joe Hughes wrote:
Sorry if I missed this come
across the wire last week:
http://blog.newenergytimes.com/2012/08/07/lenr-gets-major-boost-from-national-instruments/
Thought it was a great article and was surprised to see our dear old
friend Mary Yugu as chatty as ever in
Iggy Dalrymple
August 12th, 2012 at 10:17 PM
Dear Dr Rossi,
Regarding the fact that your industrial Hot-Cat can now be driven by gas:
What type gas, propane? If driven by gas, do you still require
electricity for the controls? If electric is still required, will a
battery suffice?
Sincerely,
I was asked on another (skeptical) forum how the Papp manages to
transmit all its energy to the crankshaft, and only get warm.
(In the second new-papp video John Rohner said they were planning to
replace the metal piston with a molded plastic / composite piston,
which would self-seal with
At 03:11 PM 8/9/2012, pagnu...@htdconnect.com wrote:
Thanks,
I perused it, but I'm not sure how Defkalion incorporates this into
their
proposed theory. Does anyone have any insights?
-- Lou Pagnucco
So's paper:
At 04:09 PM 8/10/2012, Jed Rothwell wrote:
http://www.scientificcomputing.com/news-DS-Cold-Fusion-Chemist-Martin-Fleischmann-Dies-at-85-080912.aspx
Research on cold fusion persists on the fringes of the
scientific world.
Psheeesh !!!
1. Alex Xanthoulis in LENR panel discussion at
http://youtu.be/0iKCLHxmISs
At the very end he says that they ARE moving from Greece to Vancouver,
Canada
Part I : audio accent is hard to follow, impossible to read the
slides -- I guess it's in the unavailable PDF
Showed SEM's of Nickel powder and foam.
LENR happens in Active Nuclear Environment.
Disguised or Masquerading proton -- Coulomb repulsion zero for a
very short window
Everything
At 11:34 AM 8/9/2012, Alan J Fletcher wrote:
Part I : audio accent is hard to follow, impossible to read the
slides -- I guess it's in the unavailable PDF
Showed SEM's of Nickel powder and foam.
LENR happens in Active Nuclear Environment.
Disguised or Masquerading proton -- Coulomb
At 11:40 AM 8/9/2012, Alan J Fletcher wrote:
2012-08-08_NIWeek_ Defkalion
Technical presentation_ J Hadjichristos.pdf
http://www.defkalion-energy.com/forum/download/file.php?id=23
Reference 5 is to
http://prl.aps.org/abstract/PRL/v108/i16/e165007
Phys. Rev. Lett. 108, 165007 (2012) [5 pages
At 12:33 PM 8/9/2012, Alan J Fletcher wrote:
Reference 5 is to http://prl.aps.org/abstract/PRL/v108/i16/e165007
Full paper is at http://arxiv.org/abs/1112.5556
At 12:40 PM 8/9/2012, Teslaalset wrote:
Here's a link to the pdf:
http://arxiv.org/pdf/1112.5556v6.pdf
You beat me to it!
At 01:16 PM 8/9/2012, Robert Lynn wrote:
http://www.defkalion-energy.com/forum/download/file.php?id=23
I couldn't find the So paper (other than abstract) on the interaction
between Rydberg H and metals, but here's a similar one which references
him :
At 12:14 PM 8/7/2012, Michele Comitini wrote:
Hot summer for Rossi.
http://www.journal-of-nuclear-physics.com/?p=679cpage=3#comment-296311
Also :
http://www.journal-of-nuclear-physics.com/?p=679cpage=3#comment-297077
Andrea Rossi
August 7th, 2012 at 4:53 PM
To Whom it may interest:
After
At 10:16 AM 8/8/2012, Jed Rothwell wrote:
Akira Shirakawa wrote:
Please watch this from minute
15:00 onward:
http://www.youtube.com/watch?v=NxjxFdFEBsw
There's a rough transcript at
http://ecatnews.com/?p=2291
Photo of some attendees and ID's ... including Alexandros Xanthoulis
(Defkalion GT
At 04:12 PM 8/8/2012, Axil Axil wrote:
A first hand eye witness to the Dr. Rickard P. Feynman ill
fated demo
said
Dr. Feynman actually kills that poor unlucky by-stander when he
pulled the
power plug which in tern disables the control electronics on the
Papp
engine and the engine
Feynman's account is at
http://www.museumofhoaxes.com/comments/papparticle2.html
Infinite Energy description :
http://www.infinite-energy.com/iemagazine/issue51/papp.html
Papp demonstrating his engine with a dynonometer :
http://www.youtube.com/watch?v=L7wZqDQ7Pjg
At 05:05 PM 8/8/2012, Alan J Fletcher wrote:
Feynman's account is at
http://www.museumofhoaxes.com/comments/papparticle2.html
Infinite Energy description :
http://www.infinite-energy.com/iemagazine/issue51/papp.html
Papp demonstrating his engine with a dynonometer :
http://www.youtube.com
At 07:39 PM 8/6/2012, Jojo Jaro wrote:
Jed,
Obama was indeed NOT born in Hawaii. If he was, why
the fake Birth Certificate? Why hide his Birth Certificate for so
long?
Once again, I find myself having to correct your
misinformation. You like taking pot shots and insult those you
disagree with,
Rossi blog :
Marco
July 31st, 2012 at 4:57 AM
Dear Andrea,
some day ago I asked you something about Siemens turbines, since Siemens
is about to buy Ansaldo Energia.
Now I have gathered more detailed information.
First, the acquisition of Ansaldo Energia by Siemens is very likely.
Second,
A few more dots :
http://e-catsite.com/2012/05/03/lenr-meets-henr-in-turin/
Walter Pecorella
University of Rome
Tor Vergata, Ansaldo EnergiaRe: 10th International Workshop
on Anomalies in H Loaded Met
http://www.lenrforum.eu/viewtopic.php?f=2t=150#p461
At 12:37 PM 7/31/2012, Akira Shirakawa wrote:
Andrea Aparo, Senior Advisor RD - Ansaldo Energia Spa
Putting down $1.5M for a 1MW eCat would be chicken-feed (vs sparrow
tears) for them.
http://emdrive.com/
Latest news
July 2012
An English translation of the 2010 Chinese paper, together with
unpublished test results have been obtained. The last line of the paper
confirms that experimental thrust measurements have been made at 1kW
input power. The unpublished test results show a
At 03:27 PM 7/16/2012, Robert Lynn wrote:
http://www.theregister.co.uk/2012/07/16/e_cat_opens_australian_web_shopfront/
I would need a lot of convincing that they were on the up-and-up before
giving them any of my money.
Looks to me like the standard ecat licensee foo.
(Domestic : Mid 2012
1 - 100 of 788 matches
Mail list logo