[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

mwall, Andrew, Thanks for all the great info and links. I think I'll be doing more testing with only the USB serial converter connected to the PI, I'm going to disconnected all my other devices and then let it run. I will also redefine my FTDI converter, My other USB devices are a Dell

[weewx-user] Re: weewx data loop error with new Acurite 02064C

Hey Kelly, Did you ever figure out a better solution to your problem? I have a new AcuRite 02032 and have been having a heck of a time getting weewx to successfully pull data from the display USB. I've periodically had some info successfully post to wunderground, but most of the time weewx is

[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

On Wednesday, January 3, 2018 at 12:26:28 AM UTC-5, Terry Hock wrote: > > The Ultimeter is connected directly to the PI USB port, however, I do have > a USB hub for keyboard and mouse on one of the other PI USB ports. > I have also tried three different power supplies and get the same results,

[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

Have you checked the wiki? https://github.com/weewx/weewx/wiki/udevrules also https://github.com/weewx/weewx/wiki/Raspberry-Pi weewx wiki is a mine of useful information!! On Wednesday, 3 January 2018 07:26:28 UTC+2, Terry Hock wrote: > The Ultimeter is connected directly to the PI USB port,

[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

The Ultimeter is connected directly to the PI USB port, however, I do have a USB hub for keyboard and mouse on one of the other PI USB ports. I have also tried three different power supplies and get the same results, with one being a 7 amp power supply. The Pi is a: Raspberry Pi 2 Model B I am

[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

On Tuesday, January 2, 2018 at 10:33:25 PM UTC-5, Terry Hock wrote: > > Hi, >I am trying to get the Peet Brothers Ultimeter 2100 working *reliably*. > The issues appears to be the serial-USB converter. The system can run > flawless for hours or at other times no more than 10 minutes and then

[weewx-user] Re: Peet Brothers [Error no 2] ttyUSB0 issue

Have you used this FTDI adapter in other situations or a different one? I ask because there are apparently lots of counterfeit FTDI chips out there. On Tuesday, January 2, 2018 at 10:33:25 PM UTC-5, Terry Hock wrote: > > Hi, >I am trying to get the Peet Brothers Ultimeter 2100 working

[weewx-user] Peet Brothers [Error no 2] ttyUSB0 issue

Hi, I am trying to get the Peet Brothers Ultimeter 2100 working *reliably*. The issues appears to be the serial-USB converter. The system can run flawless for hours or at other times no more than 10 minutes and then weewx stops updating. I have previously used an Accurite weather station

[weewx-user] Re: Simultaneous clone to mySQL for weewx and weewx-WD?

Yes I for one use to just dump and save but when I decided to use mySql I also decided to use replication, which I set up on a QNAP NAS... it has worked without fault as a realtime backup of the db on my pi. Nev On Tuesday, January 2, 2018 at 9:05:08 AM UTC+10, vince wrote: > > On Monday,

Re: [weewx-user] Error 110 timeout on Raspbian 9

On Tuesday, January 2, 2018 at 8:19:52 AM UTC-8, Cycle London wrote: > > Any chance .. man, I know I'm asking a lot, but how can I get a satellite > pic in there? I've tried the Met office here in London, but they don't > seem to make animated gifs available.. > > > go to the weewx map and see

[weewx-user] Re: Oregon scientific WMR300 issues

Hi mwall. I am testing RC3 and it works well! The previous error has been corrected. Thank you very much! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Error 110 timeout on Raspbian 9

I would suggest googling for import uk weather satellite image to web page and see what you find!! I'm afraid I am not in the UK On Tuesday, 2 January 2018 18:19:52 UTC+2, Cycle London wrote: > One of the reasons this didn't appear was that I use my production > webserver to proxy and

Re: [weewx-user] Error 110 timeout on Raspbian 9

One of the reasons this didn't appear was that I use my production webserver to proxy and reverse proxy .. so mydomain.com/weather was still going to mydomain/weather instead of to mydomain/weather/Bootstrap. Fixed. :) Any chance .. man, I know I'm asking a lot, but how can I get a satellite

Re: [weewx-user] Error 110 timeout on Raspbian 9

Oh, nice! Thank you. :-) On 2 January 2018 at 15:42, Andrew Milner wrote: > 1.the latest version is 2.24 - follow the link to latest versions. Even > 2.24 is 15 months old!! 2.2 beta is possibly to ancient now!! > 2.Download the tarball, not the zip - both

[weewx-user] Re: FineOffset Hang ups

I suspect most FineOffset users probably use a powered hub of some kind to avoid the RPi USB ports. Never heard of over voltage before I must admit, but am sure that over voltage will destroy most electronics. Sounds like you may have had some bad luck though - or even a faulty unit. Not

[weewx-user] Re: FineOffset Hang ups

I agree about the PI's usb, but I'd like to warn about over-voltaging the WH1080/3080 as well. I can't remember where, but I saw a suggestion about using some diodes in the USB lead to the WH3080 to reduce the voltage, which suggests that something is getting near its max.voltage. I was

Re: [weewx-user] Error 110 timeout on Raspbian 9

1.the latest version is 2.24 - follow the link to latest versions. Even 2.24 is 15 months old!! 2.2 beta is possibly to ancient now!! 2.Download the tarball, not the zip - both versions are always available 3.Do the install the easy way. Note that the INSTALL page you went to refers to

Re: [weewx-user] Error 110 timeout on Raspbian 9

So to begin with, I went to the Wiki. Checked out the Bootstrap skin, liked it so grabbed this: https://github.com/brewster76/fuzzy-archer/archive/v2.2-beta.zip I tried to install with wee_extension, but got a Python error. I don't recall what the error was, and it's scrolled off of my screen

Re: [weewx-user] Error 110 timeout on Raspbian 9

how did you try and get bootstrap running? what broke and how did it break? what did the log say? what commands did you give and what (if any) errors did you receive?? On Tuesday, 2 January 2018 16:44:52 UTC+2, Cycle London wrote: > Hi Thomas. Thanks for that. I tried to get the

Re: [weewx-user] Error 110 timeout on Raspbian 9

Hi Thomas. Thanks for that. I tried to get the 'bootstrap' skin running, but broke my install. :-( Still, I backed it up before doing so, so was able to get back to a working station. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To

Re: [weewx-user] twitter extension: Able to insert a return/new line?

Ah, I was tried triple quotes but with /n. But yes, configobj is the issue. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [weewx-user] Error 110 timeout on Raspbian 9

There is a huge webpage devoted to the subject: *The WeeWX Customizing Guide* . Be sure to see the webpage on documentation to see what else you might be missing. -tk On Tue, Jan 2, 2018 at 1:44 AM, Cycle London

Re: [weewx-user] twitter extension: Able to insert a return/new line?

If the problem is configobj, then use triple quotes, without the \n: format = """{station} {dateTime:%H:%M %b %d %Y}: T: {outTemp:%.1f}ºC D: {dewpoint:%.1f}ºC""" -tk On Mon, Jan 1, 2018 at 7:12 PM, gjr80 wrote: > On Tuesday, 2 January 2018 06:58:07 UTC+10, Chris

[weewx-user] Re: index.html reverting

all the .html files are regenerated every archive interval. You need to be editing index.html.tmpl which is the cheetah template from which the ./html page is generated. To answer another of your posts - to make the appearance and have the contents you want edit any of the .html.tmpl files -

[weewx-user] index.html reverting

Hi. Just noticed something - I've modified the index.html file in /home/weewx/public.html twice - I wanted to include an actual photograph of my WMR300 - and twice (within an hour), it has gone back to the default value. Is there some unseen cron job doing this? Thanks. -- You received

Re: [weewx-user] Error 110 timeout on Raspbian 9

I thought of that - rsyncing the data over to my production box, but I'm pretty paranoid about having anything experimental on that. I snapshot the hell out of it if I so much as update a Horde module. Anyway, I've done the proxy thang, so technically, the Pi is now invisible from the outside

Re: [weewx-user] Error 110 timeout on Raspbian 9

You could always have the web server somewhere other than on the rpi and then just use weewx/rpi to build pages in public_html (using SQLite as the database perhaps), and ftp the buil;t pages to your real protected webserver wherever it may be - on your lan or maybe even on external servers.

Re: [weewx-user] Error 110 timeout on Raspbian 9

This is incredible - it works. Thank you. Forgetting the soft link from the public_html directory. Duh! Priorities now are : 1. customization. I want dials rather than a table. Is this in the customization guide? 2. running proxy so that I don't need to have port number after the URL 3.