Re: [weewx-user] Re: Skins

Agree, Belchertown :) On Thu, 16 Aug 2018, 06:48 vince, wrote: > On Wednesday, August 15, 2018 at 10:55:54 AM UTC-7, Pat wrote: >> >> Will do. I guess I need to name this skin. I have no idea what to call >> it. Anyone have any ideas? >> >> Belchertown (after the site name), clean, minimal?

Re: [weewx-user] Re: Skins

Pat your website is fantastic, I'd love to be able to use a ported skin once you have it done. Happy to donate for your time and effort :) On Saturday, 11 August 2018 12:42:55 UTC+12, Pat wrote: > > What kind of skin are you looking for? > > For what it's worth, I'm working on porting my site

Re: [weewx-user] Re: Skins

Pat your website is fantastic, I'd love to be able to use a ported skin once you have it done. Happy to donate for your time and effort :) On Saturday, 11 August 2018 12:42:55 UTC+12, Pat wrote: > > What kind of skin are you looking for? > > For what it's worth, I'm working on porting my site

Re: [weewx-user] Recommened Hardware For Solid Driver Integration

If you don't mind DIY and ultimate flexibility you could look at WeatherDuino. Emulates the VPs USB connection. On Fri, 17 Aug 2018, 09:00 Thomas Keffer, wrote: > Hard to beat the Davis Vantage series for reliability. They publish their > API, so the driver is very mature. > > Fine Offset

Re: [weewx-user] Belchertown skin for weewx now available!

t=default=-1 >> >> You're not married to windy though, if you find another radar you like, >> you can use that instead. Just use the full HTML of http://thesite/radar.gif;> or something and making sure the width and >> height matches the parameters for an easy swap out. >&

Re: [weewx-user] Belchertown skin for weewx now available!

www.41south.net nz On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen wrote: > Ok working in test :) > > Couple of minor things with the Darksky forecast; > > I need to set the units to metric with kph wind - ?units=ca at the end of > the query string, is there a place to do that?

Re: [weewx-user] Belchertown skin for weewx now available!

mqtt just yet. Cheers Colin On Wed, Aug 22, 2018 at 1:11 PM Pat wrote: > Not sure. It might be. Worth a try and see how it goes? > > On Tuesday, August 21, 2018 at 7:50:34 PM UTC-4, Colin Larsen wrote: >> >> CloudMQTT with 5 connections and 10Kbit/sec might not be enoug

Re: [weewx-user] Belchertown skin for weewx now available!

I'm down in New Zealand so a few hours out with you. Just created my Darksky account and reading about MQTT - so much to learn! Hopefully in the next few hours but will post my success (or otherwise). Thanks again - really looking forward to getting this up and running. 1st question, can

Re: [weewx-user] Belchertown skin for weewx now available!

: 30.0°F - Max: 70.0°F ) 40.0 °F Smallest Daily Temperature Range 5.9 °F August 18, 2018 (Min: 30.0°F - Max: 35.9°F ) August 18, 2018 (Min: 30.0°F - Max: 35.9°F ) 5.9 °F On Wed, Aug 22, 2018 at 3:54 PM Colin Larsen wrote: > www.41south.net nz > > On Wed, Aug 22, 2018 at 3:54 PM Col

Re: [weewx-user] Using Weewx Simulator and getting Data from External API

This may help from OpenWeatherMap Github .. "This is an extension to weewx that uploads weather data to OpenWeatherMap." I could be wrong but I don't think it downloads data from OWM to your weewx instance On Wed, Aug 22, 2018 at 6:35 PM Akila Wickey wrote: > Hi all, > > I am beginner

Re: [weewx-user] Belchertown skin for weewx now available!

1.0 in August August, 2018 1.0 in Total Rainfall for 2018 25.4 mm 2018 25.4 mm On Thu, Aug 23, 2018 at 11:15 AM Colin Larsen wrote: > Hmmm, they weren't but the only difference was the Darksky_units I think. > I'll fix that later. > > Windy icon - fixed > Records change of units -

Re: [weewx-user] Belchertown skin for weewx now available!

Not sure but I think this line needs to change from forecast_url = "https://api.darksky.net/forecast/%s/%s,%s?%s; to forecast_url = "https://api.darksky.net/forecast/%s/%s,%s?units=%s; On Thu, Aug 23, 2018 at 11:23 AM Colin Larsen wrote: > And found a couple more records issues

Re: [weewx-user] Belchertown skin for weewx now available!

Have confirmed that this url with my API key returns the right data and timezone - using both auto and ca https://api.darksky.net/forecast/xx/-41.36,174.05?units=ca On Thu, Aug 23, 2018 at 11:58 AM Colin Larsen wrote: > Not sure but I think this line needs to change f

Re: [weewx-user] Belchertown skin for weewx now available!

he static unit in the records page. Thought I got them all! > > Also, your map is still showing the East Coast of USA. Not sure if that's > intended or not. > > On Wednesday, August 22, 2018 at 8:38:29 PM UTC-4, Colin Larsen wrote: >> >> Have confirmed that this url with m

Re: [weewx-user] Belchertown skin for weewx now available!

Forget the visibility tag problem, it's sorted :) On Thu, Aug 23, 2018 at 1:59 PM Colin Larsen wrote: > Darksky is stubborn, still won't use the units. > > There is no lat/lon in the Windy url, just location=coordinates so I've > taken that out and hard coded the NZ lat/lon, see i

Re: [weewx-user] Belchertown skin for weewx now available!

to your > config. Probably don't need the detailLat/detailLon. > > v0.3 is available to download. > https://github.com/poblabs/weewx-belchertown/releases/tag/weewx-belchertown-0.3 > > > On Wednesday, August 22, 2018 at 9:05:55 PM UTC-4, Colin Larsen wrote: >> >> T

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Just did a brand new install - smooth as butter with no errors that I can see. Pat, can you explain the temp records below for largest and smallest daily temp range? Using simulator but I would have thought those temps would be in the highest temp above if they were real data? Highest

Re: [weewx-user] Belchertown skin for weewx now available!

> is a gap once numbers are over 999, so 1000 becomes 1 000 etc and then >> there are 3 decimal places after >> i.e. 1 023.345. >> Can this be changed to 1 decimal place and get rid of the gap so 1 >> 023.345 becomes simply 1023.3 ? >> >> Cheers and thanks

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I'm about to do a complete rebuild due to a slight (read disastrous) command line slip :( I'll see if I get the same problem in case it's been introduced somehow. Mine is on a Pi3 with Raspian Stretch with desktop. Luckily I saved the weewx.conf and skin.conf - the rest is toast but

Re: [weewx-user] Belchertown skin for weewx now available!

All fixed - thanks Very very very accurate rainfall :) On Fri, Aug 24, 2018 at 9:17 AM Pat wrote: > Version 0.4's been released. > > > https://github.com/poblabs/weewx-belchertown/releases/tag/weewx-belchertown-0.4 > > > On Thursday, August 23, 2018 at 4:30:40 PM UTC-

Re: [weewx-user] Belchertown skin for weewx now available!

That super accuracy only appears in the week/month/year graphs Also there is maybe some weird averaging going on with the Month baro chart and the month solar chart doesn't exist. Same with the year charts. Thanks for all the work Pat Cheers Colin On Fri, Aug 24, 2018 at 10:00 AM Colin Larsen

Re: [weewx-user] Belchertown skin for weewx now available!

Brilliant! Will install it today and let you know how it goes. Many thanks Pat Colin On Wed, 22 Aug 2018, 06:45 Pat, wrote: > The Belchertown skin for weewx is now available. This skin is modeled > after https://belchertownweather.com > > The skin features > >- Real time streaming updates

Re: [weewx-user] Belchertown skin for weewx now available!

And I bought you coffee  On Wed, 22 Aug 2018, 07:26 Colin Larsen, wrote: > Brilliant! Will install it today and let you know how it goes. > > Many thanks Pat > > Colin > > On Wed, 22 Aug 2018, 06:45 Pat, wrote: > >> The Belchertown skin for weewx is now a

Re: [weewx-user] Re: Forecast and earthquake problems in Belchertown skin

You should probably use version 0.4 now. Did you follow all of Pat's instructions on GitHub for doing a manual installation? Colin On Sun, 26 Aug 2018, 07:26 John Clark, wrote: > If it makes any difference (although I don't think it does on this case) I > did the python install and the

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

With a test client I've discovered that CloudMQTT require a username and password to be sent for the websocket connections (TLS only too so it's a wss connection) - that needs adding into skin.conf Pat I guess please. Cheers Colin On Sun, Aug 26, 2018 at 2:04 PM Colin Larsen wrote: > No

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

341840163469", "windGustDir": "359.999062759", "humidex_C": "0.341840163469", "rain24_cm": "0.508", "inTemp_C": "17.800764", "windSpeed_kph": "4.1898406007e-05", "usUnits": "16.

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

Aug 26, 2018 at 1:44 PM Colin Larsen wrote: > Thanks John! I used the installer rather than Pat's manual method and it > works great now :) > > Ignore the data values it's working on Simulator only at the moment > > weather/41south/loop {"cloudbase_meter":

[weewx-user] MQTT with Belchertown skin - errors, No module named mqtt

Hi Pat, I think this one may be for you ... As per the above and below, I get the no module error setting up MQTT. I've sanitised the the username and password to the MQTT service in the extract of weewx.conf below, otherwise hopefully it's all as per your Github instructions. Aug 26 13:10:14

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

Pat that could be my bad on the version I'm using. I went with 0.17 to get it running, I'll move to 0.18 today, that might solve the units problem? I ended up following the wiki install as I think yours was missing a step, not 100% sure on that. Anyway let me update that. My data going up to mqtt

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

Working fine with test.mosquitto.org weather/41south/# Haven't looked at the data for sanity :) On Mon, Aug 27, 2018 at 9:25 AM Colin Larsen wrote: > That's all good Pat, I sure appreciate the time this is taking and real > work and family come first always, so certainly no rush on m

Re: [weewx-user] Re: Belchertown skin for weewx now available!

ky had a temporary false forecast? Did it update on > the next download? > > Your timestamps are different, so I'm wondering if there was a wrong > forecast that was updated in the next download interval. > > On Monday, August 27, 2018 at 10:25:28 PM UTC-4, Colin Lar

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Something to watch - the 'about.inc' is also overwritten, so if you have lots of goodies modified in that it will go back to the vanilla install page when you do an update :) Might pay to backup all the skins directory not just conf files On Wed, Aug 29, 2018 at 7:31 AM Colin Larsen wrote

Re: [weewx-user] Re: Belchertown skin for weewx now available!

way around that on upgrades. > > On Tue, Aug 28, 2018, 5:42 PM Colin Larsen wrote: > >> Something to watch - the 'about.inc' is also overwritten, so if you have >> lots of goodies modified in that it will go back to the vanilla install >> page when you do an update :) Mig

Re: [weewx-user] Re: Belchertown skin for weewx now available!

00', '3.04032258064516' > '2018-08-11 19:05:00', '1.28258064516129' > > Looks like more than 0.07 in. > > The records page probably reflects bad data. However, I'm not sure the > barometer never was -18.6F. This looks like it is using the lowest > dewpoint field instead, uni

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Actually, just clicked on your link and it works fine for me :) On Wed, Aug 29, 2018 at 10:58 AM Colin Larsen wrote: > Could be the size, try width=650 height=360? That was the > original size in the template I think and that's also what I specified in > the widget generator on

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Go to Windy.com and use their widget generator, that will give you a URL to copy, replace the one in skin.conf entirely with the new one. That fixed mine @ 41south.net.nz Colin On Tue, 28 Aug 2018, 09:42 Philip Kutzenco, wrote: > David and Pat, > > When I go to David's site, his Windy.Com

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

rogram. > > I'm working on a write up on how to secure the broker, but if you want to > read how to secure your broker beforehand, research mosquitto_passwd and > acl_file options. If you want to use SSL, you can secure your broker and > websockets using LetsEncrypt. Since this is just weather

Re: [weewx-user] Re: Belchertown skin for weewx now available!

that > icon is coming up as a direct result of the Darksy query or if there is an > 'external' influence? > > On Tue, Aug 28, 2018 at 1:31 PM Colin Larsen > wrote: > >> Nice :) >> >> Was going to mention the full moon icon, but I see it's been picked up

Re: [weewx-user] Re: Belchertown skin for weewx now available!

rksy query or if there is an 'external' influence? On Tue, Aug 28, 2018 at 1:31 PM Colin Larsen wrote: > Nice :) > > Was going to mention the full moon icon, but I see it's been picked up and > fixed. Will install it here in a few hours. > > On Tue, Aug 28, 2018 at 1:16 PM Pat wrote: > >

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Nice :) Was going to mention the full moon icon, but I see it's been picked up and fixed. Will install it here in a few hours. On Tue, Aug 28, 2018 at 1:16 PM Pat wrote: > Belchertown skin 0.5 is released > . > > This should fix the NOAA

Re: [weewx-user] Belchertown skin for weewx now available!

Thanks for the info Susan. Good news - Darksky has updated properly Just a minor thing that the wind speed is mph below each forecast icon Progress, nearly there, great work Pat, I'm loving this skin :) On Thu, Aug 23, 2018 at 2:50 PM wrote: > I just tried the Colin's site and the map is

Re: [weewx-user] Belchertown skin for weewx now available!

=coordinates==47.267=11.400=km%2Fh=%C2%B0C=-1; frameborder="0"> On Thu, Aug 23, 2018 at 5:09 PM Colin Larsen wrote: > I used the Windy embed widget and now have this in radar_html space > > https://embed.windy.com/embed2.html?lat=-41.179=172.441=5=surface=clouds12==map=coor

Re: [weewx-user] Belchertown skin for weewx now available!

I used the Windy embed widget and now have this in radar_html space https://embed.windy.com/embed2.html?lat=-41.179=172.441=5=surface=clouds12==map=coordinates==47.267=11.400=km%2Fh=%C2%B0C=-1; frameborder="0"> On Thu, Aug 23, 2018 at 5:01 PM Colin Larsen wrote: > Tha

Re: [weewx-user] Belchertown skin for weewx now available!

ime) > > > On Wednesday, August 22, 2018 at 12:30:47 AM UTC-4, Colin Larsen wrote: >> >> Arrgh, typo - www.41south.net.nz >> >> Also found this on the records page, note the change from metric back to >> US units >> >> Highest Temperature 21.1 °C Aug

Re: [weewx-user] Belchertown skin for weewx now available!

What's the best way to update Pat? On Thu, 23 Aug 2018, 08:29 Pat, wrote: > Just released 0.2. Give it a try when you can. > > > https://github.com/poblabs/weewx-belchertown/releases/tag/weewx-belchertown-0.2 > > > On Wednesday, August 22, 2018 at 4:14:07 PM UTC-4, Colin La

Re: [weewx-user] Belchertown skin for weewx now available!

isibility 3.84 miles On Thu, Aug 23, 2018 at 10:34 AM Pat O'Brien wrote: > Hopefully all of your configurations are in weewx.conf. If so you can just > download it and install it like before with wee_extension. > > On Wed, Aug 22, 2018, 5:08 PM Colin Larsen wrote: > &

Re: [weewx-user] Belchertown skin for weewx now available!

place and get rid of the gap so 1 023.345 becomes simply 1023.3 ? Cheers and thanks Colin On Thu, Aug 23, 2018 at 5:18 PM Colin Larsen wrote: > Whoops - wrong link > > I accidentally picked up the 12 hour forecast, have used this one. Let me > know what it looks like from your l

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

nches, dew point F variables it's expecting from MQTT which probably needs > to be updated. > > This weekend has been busy with (real) work, so no update on when I can > get an update out quite yet > > What is your weewx.conf target_unit set to? > > > On Sunday, August 26, 2018 a

Re: [weewx-user] Re: Belchertown skin for weewx now available!

It works great in metric for me. On Sun, 2 Sep 2018, 14:21 Praveen Chandrasekaran, wrote: > Is this skin stable enough to try or i should wait? I would need metric > units. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

I used a simple mqtt client to debug mine, saved a lot of time. There are plenty of free ones about. What are your settings in skin.conf and weewx.conf? On Wed, 5 Sep 2018, 02:35 Pat, wrote: > Hey there, I can help a little later today - back at work today. > > Initial thoughts are there should

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Just be aware that I'm only running 'simulator' so don't panic if you see awful weather here! :) On Wed, Sep 5, 2018 at 3:42 PM G Hammer wrote: > As a ‘known good’ I will try if my data fails. > > > On Tue, Sep 4, 2018 at 11:41 PM Colin Larsen > wrote: > >> I guess a

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Here's mine that work fine Weewx.conf [[MQTT]] #This section is for the MQTT service setup server_url = mqtt://test.mosquitto.org:1883/ topic = weather/41south unit_system = METRIC binding = archive, loop aggregation = aggregate Skin.conf

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

I guess as another test if needed, you could just connect to my feed and read my data into your page too On Wed, Sep 5, 2018 at 3:40 PM G Hammer wrote: > Yep, I’ll just swap to the test server. > Thanks > > On Tue, Sep 4, 2018 at 11:38 PM Colin Larsen > wrote: > >>

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

You may need to change unit_system to match yours is all On Wed, 5 Sep 2018, 15:25 G Hammer, wrote: > Thanks. > I’ll swap to test tomorrow. > > > It’s always something... > > > On Tue, Sep 4, 2018 at 11:01 PM Colin Larsen > wrote: > >> Here's min

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Since it continues to say 'connecting' that perhaps points to a problem with the skin.conf connection string? Once it gets a good connection it goes to 'connected waiting data' On Wed, 5 Sep 2018, 08:53 G Hammer, wrote: > Hi Colin, > > I don't think the problem is with sending or retrieving

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Excellent, glad progress is being made On Thu, Sep 6, 2018 at 7:42 AM G Hammer wrote: > Actually, it is the need to have a cert for the server the Mosquitto is > on. > For now, using test.mosquitto.org is working fine. > Thanks to Dave. > > On Wed, Sep 5, 2018 at 3:38 PM Col

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Yes indeed, thanks, good to know in case I go that way. On Thu, Sep 6, 2018 at 7:46 AM G Hammer wrote: > Did you see the cause? http (for you) vs https (for me) > > On Wed, Sep 5, 2018 at 3:44 PM Colin Larsen > wrote: > >> Excellent, glad progress is being made >>

Re: [weewx-user] Re: Belchertown Skin, MQTT, Incomplete Page with Good Data

Its my understanding that if mosquitto didn't support websockets then the skin updates wouldn't work at all, or did I read what you wrote wrong? This is my in-house mosquitto server config file (untested) persistence false allow_anonymous true # Non-SSL MQTT listener 1883 protocol mqtt #

Re: [weewx-user] Re: Disabling Publishing to MQTT message in log file

Nice find, thanks for the tip On Sat, 8 Sep 2018, 06:28 G Hammer, wrote: > Thanks > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to

Re: [weewx-user] Re: Belchertown skin for weewx now available!

upport metric? > > On Sat, 8 Sep 2018 at 15:16, Colin Larsen wrote: > >> There is something else a little funky going on there as the time base >> along the bottom of the charts appears to be my local time, not yours >> >> On Sat, 8 Sep 2018, 21:24 Praveen Chandrasekar

Re: [weewx-user] Re: Belchertown skin for weewx now available!

There is something else a little funky going on there as the time base along the bottom of the charts appears to be my local time, not yours On Sat, 8 Sep 2018, 21:24 Praveen Chandrasekaran, wrote: > I having an issue with metric. I added the following in weewx.conf: > > [StdReport] >

Re: [weewx-user] Re: Belchertown skin for weewx now available!

een.c...@gmail.com> wrote: > >> That seems to be my time only. Can you send me a snippet of changes you >> did to support metric? >> >> On Sat, 8 Sep 2018 at 15:16, Colin Larsen wrote: >> >>> There is something else a little funky going on there as the time

Re: [weewx-user] Belchertown Skin and MQTT With Username Not Working

Not working yet as far as I know. On Tue, 9 Oct 2018, 03:21 G Hammer, wrote: > > Does anyone have the Belchertown skin working with MQTT using a server > that requires a username and password such as CloudMQTT? > > I have tried several different ways of configuring the skin and it fails > to

Re: [weewx-user] Re: Belchertown Skin and MQTT With Username Not Working

You'll also need to supply the username and password to "receive" the MQTT data (in skin.conf or Belchertown) but that is not yet supported as far as I know. Colin On Fri, 12 Oct 2018, 07:59 , wrote: > Hi > > > > I am trying to set up MQTT on the Belchertown skin, and just can't get it > to

[weewx-user] Re: Date and time issue confirmation

file? On Monday, 29 October 2018 11:50:35 UTC+13, vince wrote: > > On Sunday, October 28, 2018 at 3:37:53 PM UTC-7, Colin Larsen wrote: >> >> This is the log below after deleting the old sdb file which contained >> only simulated data, note the added record from in

[weewx-user] Re: Date and time issue confirmation

996 (which is what the station is reporting) Confused ... On Monday, 29 October 2018 12:05:53 UTC+13, Colin Larsen wrote: > > Sadly I think I've got a problem. > > Looking at the MQTT data the epoch time is 1544700600.0, which is Dec 14 > 2018 > > And still no data

[weewx-user] Date and time issue confirmation

Hi all I'm in the process of building and testing a new system based on WeatherDuino hardware which emulates the Vantage VP stations for Weewx. Today I moved from simulator to the vantage driver with the new hardware and I'm getting a date and time issue which I think is hardware but thought

[weewx-user] Re: Date and time issue confirmation

restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.mqtt.MQTT report_services = weewx.engine.StdPrint, weewx.engine.StdReport wee_debug report successfully generated On Mon

Re: [weewx-user] Re: Date and time issue confirmation

, trendIcon: -1, txBatteryStatus: 1, usUnits: 16, UV: 0.0, windchill: 19.11, windDir: None, windGust: 0.0, windGustDir: None, windSpeed: 0.0, windSpeed10: 0.0, yearET: 0.0, yearRain: 0.0 On Monday, 29 October 2018 23:02:39 UTC+13, Colin Larsen wrote: > > Hi Andrew > > Than

Re: [weewx-user] Re: Date and time issue confirmation

versatile, adaptable, extendable - how many more adjectives do you > need??!! However - whilst the standard weewx is well proven the same is > not necessarily true for user supplied add-ons and enhancements. > > > > > > > On Monday, 29 October 2018 06:05:45 UTC+2, C

[weewx-user] Re: Date and time issue confirmation

I wonder if the Pi I'm using is a little cranky now - so many confusing problems popping up. Just saw this one in the log - another time anomaly though - 27392398.74 seconds fast Oct 29 14:37:01 raspberrypi weewx[10296]: engine: Starting up weewx version 3.8.2 Oct 29 14:37:01

Re: [weewx-user] Re: Date and time issue confirmation

t; Why don't you ask the WeatherDuino people about this? Clearly, your > instrument is emitting some strange timestamps and archive types... > > -tk > > On Sun, Oct 28, 2018 at 6:43 PM Colin Larsen > wrote: > >> I wonder if the Pi I'm using is a little cranky now

Re: [weewx-user] Re: Date and time issue confirmation

rtc is the way to go for > guaranteed success and disable all references to the fake hwclock. > > > On Tuesday, 30 October 2018 05:57:59 UTC+2, Colin Larsen wrote: >> >> Unfortunately I don't know either :) I've handed the info to the >> developer to try and sort it out. I

Re: [weewx-user] Re: Date and time issue confirmation

again. Many thanks for the help On Tue, Oct 30, 2018 at 10:03 PM Colin Larsen wrote: > Thanks for both of those bits of info Andrew. I'll try the change in > [[StdArchive]] tomorrow (here) and see how that goes > > Colin > > On Tue, 30 Oct 2018, 21:57 Andrew Milner, > w

Re: [weewx-user] Re: Date and time issue confirmation

weewx should generate the REC packets itself. >> >> . >> >> On Tuesday, 30 October 2018 09:33:01 UTC+2, Colin Larsen wrote: >>> >>> The Arduino, yes it has RTC - the Rpi no. It is syncing to my own >>> stratum 1 time source though, is tha

[weewx-user] Sqlite rookie errors

Hi all I know this is a simple fix but my sql/linux skills need a hand. I'm trying to get rid of errant data in windGust using the example in Github. I copied the weewx.sdb file to /var/lib/weewx/tmp (after creating tmp), and ran the commands below with an "unable to open database file error".

[weewx-user] Re: Sqlite rookie errors

The SELECT query does find the rouge records so I know I have the db name etc correct > > *pi@raspberrypi*:*/var/lib/weewx/tmp $* echo "SELECT * FROM archive WHERE (windGust > 100);" | sqlite3 /var/lib/weewx/tmp/weewxback.sdb

Re: [weewx-user] Re: Sqlite rookie errors

windGust=NULL WHERE (windGust > 100);" | > sudo sqlite3 /var/lib/weewx/tmp/weewxback.sdb > > Gary > > On Thursday, 15 November 2018 14:20:33 UTC+10, Colin Larsen wrote: >> >> Hi all >> >> I know this is a simple fix but my sql/linux skills need a hand. >&

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I found your instructions on integrating new items into the same menu line as the existing items easy to follow and it looks good with it all in the same line. Otherwise my vote would be above the temp/radar On Tue, 13 Nov 2018, 10:06 Pat I could do that. > > Where in index do you think? Above

Re: [weewx-user] Re: MQTT weather data as input to weewx

Works great for me outputting data On Mon, 3 Sep 2018, 09:16 Ørjan Hofstad, wrote: > Hi > Does your mqtt driver work? > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Praveen You don 't need username and or password for test.mosquitto.org, there is no sign-up, just use it :) Here is my section from weewx.conf and skin.conf, you can read my data at Mosquitto if you wish or post your own Weewx.conf [[MQTT]] #This section is for the MQTT service setup

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Hi Phil This was a difficult one and came from Pat and I discussing what to do about that fact that both inc files are overwritten during an upgrade. My initial suggestion was to keep them outside the install package so any customisation wasn't lost, I guess if there was a copy on Github but not

Re: [weewx-user] Re: Belchertown skin for weewx now available!

41south.net.nz is also running this skin, now with an extra page for lightning data in development still but proved it was easy enough to do. On Mon, 3 Sep 2018, 07:47 David Hathaway, wrote: > I use Chrome on Android Pie (Pixel XL) and my test looks surprisingly good > in mobile: >

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Change your units to suit, mine are Metric On Mon, 3 Sep 2018, 16:05 Praveen Chandrasekaran, wrote: > Thats very helpful. Thanks a lot! :) > > On Mon, 3 Sep 2018 at 08:29, Colin Larsen wrote: > >> Praveen >> >> You don >> 't need username an

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Pat can the install script back up the Inc files? Then they could go back into the archive, it looks like folks don't follow the instructions close enough unfortunately On Tue, 4 Sep 2018, 08:44 Pat, wrote: > You need to follow this step... > > >

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I agree, great job by the way, I owe you more coffee :) On Tue, 4 Sep 2018, 09:13 Pat O'Brien, wrote: > My guess is once the skin gets stable updates will be less and less. I > think we are getting close. > > On Mon, Sep 3, 2018, 5:12 PM Colin Larsen wrote: > >>

Re: [weewx-user] Re: Belchertown skin for weewx now available!

ember 3, 2018 at 5:05:27 PM UTC-4, Colin Larsen wrote: >> >> Pat can the install script back up the Inc files? Then they could go back >> into the archive, it looks like folks don't follow the instructions close >> enough unfortunately >> >> On Tue, 4 Sep

Re: [weewx-user] Date error on some historic data graphs using Belchertown skin

I can concur with the error, timezone here is NZ Standard Time (+12) Have a look at my Monthly graph - sorry can't get a screen grab with the cursor in place to show that the graphs are ahead of time. Maybe it's forecasting :) http://41south.net.nz/graphs/ Colin On Tue, Sep 25, 2018 at 3:34 PM

Re: [weewx-user] Date error on some historic data graphs using Belchertown skin

Thanks Gary and Phil for finding and sorting this :) On Wed, 26 Sep 2018, 04:19 Philip Kutzenco, wrote: > Gary, > > Excellent. Thanks for sussing this out! I'll look forward to Pat's next > release. > > Phil > > On Tuesday, September 25, 2018 at 10:04:07 AM UTC-4, gjr80 wrote: >> >> OK, I think

Re: [weewx-user] Date error on some historic data graphs using Belchertown skin

I've just noticed that the end of the Week chart is an hour ahead of my current time - probably all related On Wed, Sep 26, 2018 at 7:40 AM Colin Larsen wrote: > Thanks Gary and Phil for finding and sorting this :) > > On Wed, 26 Sep 2018, 04:19 Philip Kutzenco, wrote:

[weewx-user] An MQTT observation (Poblabs skin related?)

Not 100% sure where this belongs but here goes; My home MQTT broker stopped yesterday around 1am. It's been nearly 36hrs until I've been in a position to restart it, but when I did Weewx appeared to start feeding it the real-time data from the point in time that the broker stopped in some sort of

Re: [weewx-user] Re: Start of 2019 not so smooth

ied 22 files to /var/www/html/weewx/belchertown On Tue, Jan 1, 2019 at 11:52 AM Greg from Oz wrote: > I am in Oz and mine is OK. > Probably the skin. > https://weather.ubeaut.work/ > > On Tuesday, 1 January 2019 09:00:43 UTC+11, Colin Larsen wrote: >> >> Happy New Year

Re: [weewx-user] Re: Start of 2019 not so smooth

Ah well, if you're quick you'll fix it before it strikes there :) On Tue, Jan 1, 2019 at 1:48 PM Pat wrote: > I'm awake! But it's 7:30pm here, not 2019 yet. Hmm... > > On Monday, December 31, 2018 at 6:39:02 PM UTC-5, Colin Larsen wrote: >> >> sqllite here >> >>

[weewx-user] Start of 2019 not so smooth

Happy New Year all I awoke this morning (2019 here in NZ) to find this; Jan 1 10:55:29 raspberrypi weewx[9736]: reportengine: Caught unrecoverable exception in generator weewx.cheetahgenerator.CheetahGenerator Jan 1 10:55:29 raspberrypi weewx[9736]: 'NoneType' object has no

[weewx-user] Re: Start of 2019 not so smooth

I suspect a problem in the skin so have logged an issue with Pat On Tuesday, 1 January 2019 11:00:43 UTC+13, Colin Larsen wrote: > > Happy New Year all > > I awoke this morning (2019 here in NZ) to find this; > > Jan 1 10:55:29 raspberrypi weewx[9736]: reportengine: Caugh

Re: [weewx-user] Re: Start of 2019 not so smooth

ghs up > for me after the year roll over. > > phil > > On Monday, December 31, 2018 at 6:08:19 PM UTC-5, Colin Larsen wrote: >> >> Thanks Greg and HNY to you. >> >> Yep I just did a reboot and got a better look at the error, it certainly >> loo

Re: [weewx-user] Re: Belchertown skin for weewx now available!

There is a new belchertown.py to fix it. On Tue, 1 Jan 2019, 21:40 Scott Grayban Also post follow ups at > https://groups.google.com/d/topic/weewx-user/ARBHWDXiDpQ/discussion and > not here. > > On Monday, December 31, 2018 at 10:37:34 PM UTC-8, Zsolt Máté wrote: >> >> I'm getting the following

Re: [weewx-user] Re: Belchertown Skin 0.8.1 released

On Fri, Dec 28, 2018 at 2:29 PM Colin Larsen wrote: > My browser won't connect to your data, which is due to the fact that you > need to port forward the 9001 in your router - otherwise other users > outside your network can't access the MQTT data. You'll also need to > provide yo

Re: [weewx-user] Re: Belchertown Skin 0.8.1 released

else check again please ? >>> >>> On Thursday, December 27, 2018 at 5:40:04 PM UTC-8, Scott Grayban wrote: >>>> >>>> Ahh so use my router IP instead and port forward >>>> >>>> On Thursday, December 27, 2018 at 5:33:59 PM UTC-8,

Re: [weewx-user] Re: Belchertown Skin 0.8.1 released

t;> >> Can everyone else check again please ? >> >> On Thursday, December 27, 2018 at 5:40:04 PM UTC-8, Scott Grayban wrote: >>> >>> Ahh so use my router IP instead and port forward >>> >>> On Thursday, December 27, 2018 at 5:33:59 PM UTC-8, Co

  1   2   3   >