Re: [WISPA] 18 Ghz Range

: Re: [WISPA] 18 Ghz Range We have a couple of 18ghz at about 10 miles full modulation.  We are in rain zone B though, we have never had issues with fading in the rain at all though. Sent from my Verizon, Samsung Galaxy smartphone Original message ----From: lakeland <lakel...@gbc

Re: [WISPA] 18 Ghz Range

I would not do more than about 2-3 miles on an 18 ghz hop depending on your weather.  The other issue is only 60' elevation.  Not happy at all with that elevation for more than a mile. Sent from my Verizon, Samsung Galaxy smartphone Original message From: Sam Morris

Re: [WISPA] Going Rate for Smaller Structures

Go by square footage.  Your footprint is much smaller than a cell provider... Sent from my Verizon, Samsung Galaxy smartphone Original message From: Seth Mattinen Date: 1/11/17 7:32 PM (GMT-05:00) To: wireless@wispa.org Subject: Re: [WISPA] Going Rate

Re: [WISPA] 900 MHz interference

Good luck with that.  No gonna block a -45 carrier at900 mhz easily. That is going to be a real challenge Sent from my Verizon, Samsung Galaxy smartphone Original message From: Clay Stewart Date: 12/14/16 7:04 PM (GMT-05:00) To:

Re: [WISPA] Any IgniteNet MetroLinq customers out there

Do they work if you set them up on the bench with the power turned all the way down?  If you can turn the power down.  What receive level do you have at 5 ghz? Not totally familiar with the Metrolinqjust starting with basic initial setup questions Sent from my Verizon, Samsung Galaxy

Re: [WISPA] Grounding hardware/connector to bus bar

Ground lug.  Come in 3/8 or 1/4 inch holes.  You have 3/8. Hole spacing is one of two different gaps. Go to www.sitepro1.com and go to overstock tab.  They have them on clearance without inspection windows. If u r size is not there go to the grounding tab. If you buy universals lugs they will

Re: [WISPA] Air Force Base / KSC Launch RFI Question

Scott First I have heard of military radar operating in the upper 5.8 spectrum but the equipment is probably older than the NTIA/FCC database. Part 15 states your equipment must accept interference and must not cause interference.  As such, if the military can prove that your equipment is

Re: [WISPA] Guy Wire Calculator

Kevin Do yourself a favor and put up the Nello 25N version not the Rohn.  The legs will line up better and you wont have to deal with holes plugged with galvanizing. Nello will provide you with a material list for your install according to your area. Bob Sent from my Verizon Wireless 4G LTE

Re: [WISPA] Completed Video of Tower work and quadcopter

Yeah...Thanks alot for the video Gino..  Now I have $1250 less in my account thanks to you and your video.. ;-) -B- Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Mike Hammett wispawirel...@ics-il.net Date:02/03/2014 10:05 AM (GMT-05:00) To:

Re: [WISPA] Advice Needed on 200 Mbps FDX Radios

://www.ics-il.com From: lakeland lakel...@gbcx.net To: WISPA General List wireless@wispa.org Sent: Monday, January 13, 2014 3:51:23 PM Subject: Re: [WISPA] Advice Needed on 200 Mbps FDX Radios Thats great and all but here is the argument... Coordination is not licensing.  There are coordinators out

Re: [WISPA] Advice Needed on 200 Mbps FDX Radios

Scott It is not possible to get a link licensed in 2-3 weeks.  Where is this info coming from? Bob Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Scott Carullo sc...@flhsi.com Date:01/13/2014 1:38 PM (GMT-05:00) To: WISPA General List

Re: [WISPA] Advice Needed on 200 Mbps FDX Radios

[mailto:wireless-boun...@wispa.org] On Behalf Of lakeland Sent: Monday, January 13, 2014 12:22 PM To: sc...@flhsi.com; WISPA General List Subject: Re: [WISPA] Advice Needed on 200 Mbps FDX Radios   Scott   It is not possible to get a link licensed in 2-3 weeks.  Where is this info coming from

Re: [WISPA] Advice Needed on 200 Mbps FDX Radios

@wispa.org Cc: sc...@flhsi.com Subject: Re: [WISPA] Advice Needed on 200 Mbps FDX Radios I thought you could do a rush on it? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Jan 13, 2014 at 2:21 PM, lakeland lakel...@gbcx.net wrote

[WISPA] Need Bandwidth in Ft Myers FL

Looking for 25 Meg FD with SLA.  Brokers need not apply.   Contact me offlist. Tnx -B- Bob Moldashel lakek...@gbcx.net Sent from my Verizon Wireless 4G LTE Smartphone___ Wireless mailing list Wireless@wispa.org

Re: [WISPA] iPerf as a Real-World Performance Simulation Tool

Don't remember.  Solved the problem with matching machines Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Josh Luthman j...@imaginenetworksllc.com Date: 11/12/2013 9:10 PM (GMT-05:00) To: WISPA General List wireless@wispa.org Subject: Re: [WISPA]

Re: [WISPA] Siklu/Dragonwave 80 Ghz..

There are no 3' dishes at 80 Ghz.  We have quite a bit of experience installing Bridgewave and Proxim milimeter wave equip.  We actually installed the first few pairs of Bridgewave AR80x units for Bayone Medical Center. They weree the first set of parallel links ever placed. While I agree that

[WISPA] Alvarion Demise?

http://www.cellular-news.com/story/60986.php Sent from my Verizon Wireless 4G LTE Smartphone___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Ubiquiti M5 Powerbridge

Ok. Tnx Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Stuart Pierce spie...@avolve.net Date: 07/12/2013 7:11 AM (GMT-05:00) To: sc...@brevardwireless.com,WISPA General List wireless@wispa.org Subject: Re: [WISPA] Ubiquiti M5 Powerbridge What

Re: [WISPA] Metal building parapet wall mount for 3ft dish question

Scott, Its either brick with metal covering it or it hollow with light steel H beam construction. If its block underneath or if its steel I would drill all the way through and sandwich the wall on each side. We would use a Site Pro 1 WM1665 or SP250-6 with 2 pieces of 3 x 3 angle on the back

Re: [WISPA] 5.8 Ghz links and high tension inter-state powet lines...

Go for it.  You should be fine.  There will be no power issues as the 200 feet greatly exceeds the allowable distances for fixed appurtences.  RF wise you should also have no issue.  We have many links passing through lines with no issue. -B- Sent from my Verizon Wireless 4G LTE Smartphone

Re: [WISPA] Fiber MUX

Sounds like yoy could use a couple of Dragonwave Pseudowire units.  16 T1 to Ethernet. Copper only for you would need to media convert for f iber. Bob Sent from my Verizon Wireless 4G LTE Smartphone Original message From: m...@tc3net.com Date: 05/20/2013 11:33 AM

Re: [WISPA] Electrical noise problem / need solution

Scott, A few questions. What power are you running up the tower, 120VAC? Need to know make and model on the Tsunami.  Are they losing the link on both sides or just one? Your cable may be inducing something onto their cable that is screwing with the radio's conversion freq if its a two piece

Re: [WISPA] GA Aircraft Interrupting Microwaves?

Unless one of your sites is right by the airport I would say aircraft are not the issue.  Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Matt Hoppes mhop...@indigowireless.com Date: 04/29/2013 10:39 AM (GMT-05:00) To: memb...@wispa.org,WISPA

Re: [WISPA] Tower Climber Needed - Baton Rouge, LA

Good luck Cliff.  There is so much LTE/4G upgrade work going on right now its almost impossible to come up with a last minute crew. Sent from my Verizon Wireless 4G LTE Smartphone Original message From: Cliff Leboeuf cliff.lebo...@cssla.com Date: 04/25/2013 9:52 AM

Re: [WISPA] OT: Proxim 5054

I assume you don't have the log in user and password? Sent from my Verizon Wireless 4GLTE smartphone - Reply message - From: Dan Petermann d...@wyoming.com To: Ubiquiti Users Group ubnt_us...@wispa.org Subject: [WISPA] OT: Proxim 5054 Date: Mon, Dec 10, 2012 8:26 pm Does anyone know

Re: [WISPA] Monopole mount

Site Pro 1. Part No. CHGPS. Chain mount that normally is used in the cell industry for GPS antennas. We have used them for microwave projects and the work great. $189 plus ship. www.sitepro1.com - Reply message - From: Gino Villarini g...@aeronetpr.com To: WISPA General List

Re: [WISPA] Guidance for mounting gear on an AM tower

The station engineer should be the lead information contact. If he is clueless most AM stations have engineering firms on retainer. Adding equipment to certain stations can change the antenna radiation pattern. Obviously the FCC doesn't lie this. ;-) -B- - Reply message - From: Brian

Re: [WISPA] Ubiquiti Picostation 2HP Question

How do I turn off Airmax. I don't see a setting for it - Reply message - From: timothy steele timothy.pct...@gmail.com To: WISPA General List wireless@wispa.org Subject: [WISPA] Ubiquiti Picostation 2HP Question Date: Tue, Aug 7, 2012 7:23 pm Turn AirMax off set to AP WDS On Tue, Aug 7,

Re: [WISPA] Attenuation of polycarbonate or acrylic at 5.8Ghz ?

Not gonna be a problem. I have antennas behing 1 Lexan with no real discernable difference Sent via DROID on Verizon Wireless -Original message- From: Tom Sharples tsharp...@qorvus.com To: WISPA General List wireless@wispa.org Sent: Wed, May 25, 2011 22:45:26 GMT+00:00 Subject:

Re: [WISPA] Towers

Price wise Titan freestander... Make sure you buy it from a distributor that gets it already kitted. Got several of these from Tessco a few years ago and they were a nightmare because Tessco kitted the tower themselves Sent via DROID on Verizon Wireless -Original message-

Re: [WISPA] looking for ideas...

With copper you need to consider the differences of ground potential between sites. Fiber eliminates that issue Sent via DROID on Verizon Wireless -Original message- From: Scott Reed sr...@nwwnet.net To: WISPA General List wireless@wispa.org Sent: Sat, May 7, 2011 11:49:23 GMT+00:00

Re: [WISPA] looking for ideas...

Agreed. Fiber is dirt cheap on Ebay. NOS. Media converters for less than $100 each Sent via DROID on Verizon Wireless -Original message- From: Butch Evans but...@butchevans.com To: wireless@wispa.org Sent: Fri, May 6, 2011 22:24:44 GMT+00:00 Subject: Re: [WISPA] looking for ideas...

Re: [WISPA] Rope

Throwing down a smaller rope may not seem like a good idea but what are you going to do when you have to rig a pedestal water tank where you need to climb up the center tube or a tower that has 6 carriers below you and you can't make a straight climb? My statement comes from 30 years of

Re: [WISPA] Rope

/ Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631-286-8873 Fax 516-551-1131 Cell WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] New self-supporting tower

Nello. The holes line up, the hardware count is always complete, the construction drawings are simple, no need to drill galvanizing out of the legs and the price is right Rohn makes em but you will pay for the name. -B- Sent via DROID on Verizon Wireless -Original message- From:

Re: [WISPA] looking for feedback on Exalt - ExploreAir

Great product. Works like a dream. No sales fluff in that stuff -B- Sent via DROID on Verizon Wireless -Original message- From: Mike Hammett wispawirel...@ics-il.net To: WISPA General List wireless@wispa.org Sent: Wed, Apr 13, 2011 02:21:15 GMT+00:00 Subject: Re: [WISPA] looking for

[WISPA] OT Friday. ;-)

OK. Not being the computer genius that I want to be can anyone give me an economical lead on Windows XP Pro SP3 operating system which is legal and valid. I need programs for a handful of machines Tnx -B- Sent from my Verizon Wireless BlackBerry

Re: [WISPA] [Motorola II] Broadband work with Indian Reservation

Hm. How do you become a soverign nation? Sounds like its a lot better than being a WISP or an Integrator. :-) -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Charles Wu (CTI) c...@cticonnect.com Sender: wireless-boun...@wispa.org Date: Fri, 13 Aug 2010

Re: [WISPA] Orthogon Gemini PoE Injector

Did u open it and check the internal fuse? Power supplies are the only problem we ever had with Orthogon radios. I have about 10 dead ones Sent from my Verizon Wireless BlackBerry -Original Message- From: KosiNet Wireless wirel...@kosinet.com Sender: wireless-boun...@wispa.org Date:

Re: [WISPA] Ubiquiti Link - Poor Performance

You should be. LOL! NP. Call me monday when it comes back. J/K -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG rgunder...@gmail.com Sender: wireless-boun...@wispa.org Date: Sat, 7 Aug 2010 00:04:08 To: WISPA General Listwireless@wispa.org Reply-To: WISPA

Re: [WISPA] 5.4 GHz PtP

Exalt Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Sender: wireless-boun...@wispa.org Date: Sat, 07 Aug 2010 09:08:54 To: WISPA General Listwireless@wispa.org Reply-To: WISPA General List wireless@wispa.org Subject: [WISPA] 5.4

Re: [WISPA] POE / Ethernet extenders

What is higher? How high? Sent from my Verizon Wireless BlackBerry -Original Message- From: Jason Hensley ja...@jaggartech.com Sender: wireless-boun...@wispa.org Date: Fri, 6 Aug 2010 15:32:06 To: 'WISPA General List'wireless@wispa.org Reply-To: WISPA General List wireless@wispa.org

Re: [WISPA] POE / Ethernet extenders

How do you run the 110 up the tower? Sent from my Verizon Wireless BlackBerry -Original Message- From: Philip Dorr wirel...@judgementgaming.com Sender: wireless-boun...@wispa.org Date: Fri, 6 Aug 2010 15:55:04 To: WISPA General Listwireless@wispa.org Reply-To: WISPA General List

Re: [WISPA] Lightning AGAIN

Could have come in thru the AC power. I have seen selective failures following lightning hits on the service feeds. Just FYI Sent from my Verizon Wireless BlackBerry -Original Message- From: Jeremie Chism jchi...@gmail.com Sender: wireless-boun...@wispa.org Date: Fri, 6 Aug 2010

Re: [WISPA] Roof Mounts

Rohn Satellite mounts. You will need to clamp another mast pipe to the existing pipe to get enough height for more than one 24 dish -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: chris cooper ccoo...@intelliwave.com Sender: wireless-boun...@wispa.org Date: Tue, 3

Re: [WISPA] Roof Mounts

They make a Quickmount that fits on a peaked roof? Sent from my Verizon Wireless BlackBerry -Original Message- From: Jerry Richardson jrichard...@aircloud.com Sender: wireless-boun...@wispa.org Date: Tue, 3 Aug 2010 16:04:00 To: WISPA General Listwireless@wispa.org Reply-To: WISPA

Re: [WISPA] OFFLIST: Re: Mikrotik User Meeting

Oooo! Sent from my Verizon Wireless BlackBerry -Original Message- From: Butch Evans but...@butchevans.com Sender: wireless-boun...@wispa.org Date: Thu, 29 Jul 2010 18:35:42 To: WISPA General Listwireless@wispa.org Reply-To: WISPA General List wireless@wispa.org Subject: [WISPA]

Re: [WISPA] Missing Bridgewave

Welcome to the world of milimeter band. Its all due to critical construction standars and tolerances. Proxim Gigalink is also done in matched pairs -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Sender:

Re: [WISPA] Missing Bridgewave

You can't purchase just one side of a Bridgewave 60 or 80 GHz link. The links are calibrated to talk in pairs. The RSL, TX Power and link calibration methods are all specific for each preset link. Even when one radio is known bad (I.e. dead) and there is an advanced replacement plan in

Re: [WISPA] Interference on 11GHz

Did you do a search on the FCC ULS site to see what is authorized at your locations? I have heard of several issues where the high and low radios were installed at the wrong sites on Clear deployments. Not saying that s the issue but it is something to check -B- Sent from my Verizon Wireless

Re: [WISPA] GFCI outlet trips

No. I can't remember the last time I saw a GFCI at a tower site except for a service outlet on the outside of a shelter. My understanding they are only required in wet locations where corded devices are used. Hardwire a UPS into the circuit and throw the GFCI out. NEC does not require GFCI's

Re: [WISPA] GFCI outlet trips

We have had problems over the years at sites using GFCI's. In all cases we removed them and hardwired the equipment. Way too many service interuptions with them in place. Obviously you need to maintain code but there are always ways around it. -B- Sent from my Verizon Wireless BlackBerry

Re: [WISPA] ANOTHER Apex firmware upgrade problem

Sorry I can't help but is it me or do I see a lot of posts on these units regarding firmware changes. I can't remember the last time I did a firmware upgrade on a licensed link. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: can...@believewireless.net

Re: [WISPA] Becoming a Wisp

Yeah. What the heck guys? If it was that involved 3/4's of the people on this list would be unemployed or doing something else. Someone needs to layout the bootstrap version for him. I can't do it on a blackberry -B- Sent from my Verizon Wireless BlackBerry -Original Message- From:

Re: [WISPA] Dragonwave Horizon Quantum

I have a large amount of Compacts in the air without issue. They work great. They are not upgradeable to Quantum or Duo. If you will need the bandwidth then go directly to the Quantum. Be careful of your 1+1 idea. Makes no sense if you are running one common IDU with one common ODU with 2

Re: [WISPA] Hamvention

That is a myth. Sent from my Verizon Wireless BlackBerry -Original Message- From: Kurt Fankhauser k...@wavelinc.com Date: Mon, 17 May 2010 01:36:07 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] Hamvention You can't use a fiberglass omni at the top of a tower and

Re: [WISPA] [Fwd: You're going to love this... New IRS rules]

Ok. The truth sucks. Another government burden on joe business. What a PITA Sent from my Verizon Wireless BlackBerry -Original Message- From: Josh Luthman j...@imaginenetworksllc.com Date: Thu, 29 Apr 2010 11:02:42 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] [Fwd:

Re: [WISPA] You're going to love this... New IRS rules

This has always been in effect for individuals. Its not for entities and its surely not new -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: MDK rea...@muddyfrogwater.us Date: Wed, 28 Apr 2010 19:40:21 To: WISPA General Listwireless@wispa.org Subject: [WISPA]

Re: [WISPA] Remotely Adjusted Dish Mount

Just mount it to a commercial PTZ camera mount. There are plenty on E-Bay and you can mount a camera on it to so you know what you are looking at Sent from my Verizon Wireless BlackBerry -Original Message- From: Chuck Profito cprof...@cv-access.com Date: Sun, 25 Apr 2010 09:49:18 To:

Re: [WISPA] Who to use to license a 11ghz backhaul link?

LOL! Sent from my Verizon Wireless BlackBerry -Original Message- From: Charles Wu c...@cticonnect.com Date: Fri, 23 Apr 2010 14:39:26 To: sc...@brevardwireless.comsc...@brevardwireless.com; WISPA GeneralListwireless@wispa.org Subject: Re: [WISPA] Who to use to license a 11ghz backhaul

Re: [WISPA] Best Backhaul link 11Ghz 20 miles @ 100MB?

What turned you off to Dragonwave? Sent from my Verizon Wireless BlackBerry -Original Message- From: Adam Kennedy adamkenn...@omnicity.net Date: Tue, 20 Apr 2010 21:40:59 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Best Backhaul link 11Ghz 20 miles @ 100MB? What issues

Re: [WISPA] Best Backhaul link 11Ghz 20 miles @ 100MB?

Well with the exception of the CAT5 limitations I believe your concerns with the Horizon Compact are unfounded. I have nearly 40 links in Manhattan on some of the largest buildings in America that get direct hits all the time and have had NO issues with Transtector arrestors. Good luck with

Re: [WISPA] Best Backhaul link 11Ghz 20 miles @ 100MB?

So you are making your decision on what you saw with Dragonwave equipment in 2007??? That is not making a lot of sense. You can open the diagnostic files in notepad and look at everything. No secrets. Sent from my Verizon Wireless BlackBerry -Original Message- From: Adam Kennedy

Re: [WISPA] Proxim quickbridge 5054

I have around 700 deplayed in ptp configuration. The 5054 quickbridge is going to max out around 22-24 Mbps. You said you have 'high' interference but not sure what you mean as it relates to the spectrum. 5.8 only or all 5 GHz band? You also don't specify link path length. Is this a short or

Re: [WISPA] Oh this business, tell me again why we love it?!

- Original Message - From: Lakeland lakel...@gbcx.net To: WISPA General List wireless@wispa.org Sent: Monday, March 29, 2010 12:40 PM Subject: Re: [WISPA] Oh this business, tell me again why we love it?! Marlon, You have personal contacts. That's cheating. I have contacts too and could

Re: [WISPA] Oh this business, tell me again why we love it?!

. Maybe I'm just totally wrong. -B- Marlon K. Schafer writes: H, I've had much better luck that than Bob. marlon - Original Message - From: Lakeland lakel...@gbcx.net To: WISPA General List wireless@wispa.org Sent: Saturday, March 27, 2010 7:16 PM Subject: Re

Re: [WISPA] Oh this business, tell me again why we love it?!

- From: Lakeland lakel...@gbcx.net To: Tom Sharples tsharp...@qorvus.com; WISPA General List wireless@wispa.org Sent: Saturday, March 27, 2010 5:37 PM Subject: Re: [WISPA] Oh this business, tell me again why we love it?! This is really the only way to handle this. Send them a cease

Re: [WISPA] rugged spectrum analyzer

/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631

Re: [WISPA] Oh this business, tell me again why we love it?!

/pipermail/wireless/ Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631-286-8873 Fax 516-551-1131 Cell WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] Oh this business, tell me again why we love it?!

://lists.wispa.org/pipermail/wireless/ Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631-286-8873 Fax 516-551-1131 Cell WISPA Wants You! Join today! http://signup.wispa.org

Re: [WISPA] Ham Fest

://lists.wispa.org/pipermail/wireless/ Bob Moldashel Lakeland Communications, Inc. 1350 Lincoln Avenue Holbrook, NY 11741 800-479-9195 631-286-8873 Fax 516-551-1131 Cell WISPA Wants You! Join today! http

Re: [WISPA] Proxim QB-8100 / MP-8100

They Rock. Sent from my Verizon Wireless BlackBerry -Original Message- From: Patrick Cole z...@amused.net Date: Tue, 23 Mar 2010 11:44:49 To: 'WISPA General List'wireless@wispa.org Subject: [WISPA] Proxim QB-8100 / MP-8100 Hi all, Proxim's new 3x3 and 2x2 MIMO based radios... The

Re: [WISPA] Tower Mounts

www.sitepro1.com Sent from my Verizon Wireless BlackBerry -Original Message- From: Michael Baird m...@tc3net.com Date: Fri, 19 Mar 2010 20:48:22 To: 'WISPA General List'wireless@wispa.org Subject: [WISPA] Tower Mounts We are planning on opening up a few new towers and will have limited

Re: [WISPA] Friendly reminder

A Licensed Eletrician with an Insurance Certificate. :-) Sent from my Verizon Wireless BlackBerry -Original Message- From: Justin Wilson - MTIN li...@mtin.net Date: Thu, 18 Mar 2010 21:04:56 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Friendly reminder Licensed

Re: [WISPA] Moisture Abatement Techniques

That will work. But the mastic is a PITA for a reason. It works all the time regardless the weather, temp, etc. We have tried a lot of things over the years and its the one that always keeps the water out -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Steven

Re: [WISPA] Anyone gotten a 3.65 license lately?

Never say never. Maybe if you are right next to their site but I am pretty confident that you can get a site approved with the right engineering study and maybe a waiver request. Depends on how bad you want it -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Pat

Re: [WISPA] Service in Ft. Myers FL

I tried that 2 weeks ago with no answer -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Scott Carullo sc...@brevardwireless.com Date: Tue, 9 Mar 2010 16:39:09 To: wireless@wispa.org Subject: [WISPA] Service in Ft. Myers FL Need some - contact me with info

Re: [WISPA] Prefab Tower Foundations

Really? Sent from my Verizon Wireless BlackBerry -Original Message- From: Lists li...@stlbroadband.com Date: Thu, 4 Mar 2010 10:02:33 To: 'WISPA General List'wireless@wispa.org Subject: [WISPA] Prefab Tower Foundations

Re: [WISPA] Electric Hoist?

I agree with Brad. Lifting a 4' dish is like lifting a 13 sq ft piece of plywood. Be careful. You need to tag this load about 150+ feet from the base of the tower to protect other equipment on the tower and your antenna. Very unpredictable if not rigged right. -B- Sent from my Verizon

Re: [WISPA] tower contracts

Many cell guys do this when building sites. Each site is its own corporation Sent from my Verizon Wireless BlackBerry -Original Message- From: RickG rgunder...@gmail.com Date: Tue, 2 Mar 2010 21:38:32 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] tower contracts The more

Re: [WISPA] FCC Broadband plan call for more spectrum---- but notforWISP's that's for sure.

You know what will make America more technogically competitive? Not selling out the little guy for the big guy with money. I hate to say it but I would be really surprised to see any real white space for solid Wisp unlicensed use. -B- Sent from my Verizon Wireless BlackBerry -Original

Re: [WISPA] FCC Broadband plan call for more spectrum---- but notforWISP's that's for sure.

I don't think that money would buy the whiite space over The mist remote part of Alaska I'm sorry to say Sent from my Verizon Wireless BlackBerry -Original Message- From: Philip Dorr wirel...@judgementgaming.com Date: Wed, 24 Feb 2010 16:43:14 To: WISPA General Listwireless@wispa.org

Re: [WISPA] Fish Tape / OT

www.laborsavingdevices com Something for everyone. -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Josh Luthman j...@imaginenetworksllc.com Date: Wed, 10 Feb 2010 14:34:14 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Fish Tape / OT Glow rods are

Re: [WISPA] Earthquake in Northern Illinois

It was somebodies fault. I have an alibi. :-) -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: St. Louis Broadband li...@stlbroadband.com Date: Wed, 10 Feb 2010 04:51:20 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] Earthquake in Northern

Re: [WISPA] [Wispashow] Decision on WISPA Show

10+ years ago I remember making a deal with a hotel to take a shower in a room that was being refurbished after driving through he night from NY. No available rooms for 50 miles. I should throw all my crap into a U-haul truck, drive it out there and abandon the thing! LOL -B- Sent from my

Re: [WISPA] Extra jacketed CAT5e

1351A is the heavy duty outdoor version we use. But that number is for CAT6 I believe Sent from my Verizon Wireless BlackBerry -Original Message- From: Kurt Fankhauser k...@wavelinc.com Date: Wed, 3 Feb 2010 11:21:57 To: 'WISPA General List'wireless@wispa.org Subject: [WISPA] Extra

Re: [WISPA] [Wispashow] Decision on WISPA Show

I like Ham Let's have it in Nashville or Kansas City. Pulled pork is my favorite! :-) -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Josh Luthman j...@imaginenetworksllc.com Date: Wed, 3 Feb 2010 21:16:21 To: WISPA General Listwireless@wispa.org Subject:

Re: [WISPA] Short range backhaul

I think you forgot the most expensive part. Insurance -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Glenn Kelley gl...@hostmedic.com Date: Sun, 31 Jan 2010 15:28:18 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Short range backhaul Most towns

Re: [WISPA] Short range backhaul

You can get a Proxim 60250 Quickbridge for about $6K. 100 Mb. Full Duplex. 60 GHz Sent from my Verizon Wireless BlackBerry -Original Message- From: Brad Belton b...@belwave.com Date: Sat, 30 Jan 2010 19:35:31 To: 'WISPA General List'wireless@wispa.org Subject: Re: [WISPA] Short range

Re: [WISPA] Short range backhaul

You can get a brand new 38 GHz DS3 hop on Ebay for less than a grand For another grand you lease the radio channel and you're done. Gives you DS3 out to your router. Less than $2K for the real deal. Or I have a Proxim DS3 or 45 MHz link used for a great price off list. Bob Sent from my

Re: [WISPA] Fwd: Short range backhaul

Btw. The lease is a 5yr lease Sent from my Verizon Wireless BlackBerry -Original Message- From: Jeremie Chism jchi...@gmail.com Date: Sat, 30 Jan 2010 21:39:57 To: WISPA General Listwireless@wispa.org Subject: [WISPA] Fwd: Short range backhaul It's hard to turn down a ds3 for 2k a

Re: [WISPA] [SPAM-URL-BL] Where is Jack Rickard?

LOL. I remember that! Will the real Stuart Pierce please stand up! Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Delp miked...@gmail.com Date: Fri, 29 Jan 2010 09:19:34 To: spie...@avolve.net; WISPA General Listwireless@wispa.org Subject: Re: [WISPA]

Re: [WISPA] Side Mount to Wooden Utility Pole?

Get some conduit straps and screw them into the pole Sent from my Verizon Wireless BlackBerry -Original Message- From: AJ aj.grant...@gmail.com Date: Mon, 25 Jan 2010 11:10:10 To: WISPA General Listwireless@wispa.org Subject: Re: [WISPA] Side Mount to Wooden Utility Pole? I kinda ruled

Re: [WISPA] Spectrum Analyzer Recommendation?

Well. as a guy that uses this equipment every day I can verify that a large amount of individuals with titles and letters after their names don't have a clue. :-) Not all...just a good quantity of them -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Blake

Re: [WISPA] Collections

Can't you just save them all up and go to small claims court? Make one trip and don't share any money with anyone. Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net Date: Tue, 19 Jan 2010 13:29:44 To: wireless@wispa.org Subject:

Re: [WISPA] stolen solar site

Marlon the Pittbull Detective. Go get dude. If you pay for a roundtrip ticket I have a friend come out from Brooklyn! LOL Goog Luck Sent from my Verizon Wireless BlackBerry -Original Message- From: Marlon K. Schafer o...@odessaoffice.com Date: Tue, 19 Jan 2010 11:43:32 To:

Re: [WISPA] Collections

Understood I collect about 90% of my money without even getting in the court house. Just go there, fill out forms and then wait for the phone to ring. Good luck getting them -B- Sent from my Verizon Wireless BlackBerry -Original Message- From: Mike Hammett wispawirel...@ics-il.net

Re: [WISPA] stolen solar site

Install eyehooks in each panel and daisey chain a wire through the panels. Connect the cable to a pair of N/C contacts on an ethernet SMS alarm panel. They cut the cable, you grt an alarm. Otherwise find some way to connect them together so its really time consuming or difficult to

Re: [WISPA] stolen solar site

Drag the welder up there. Couple of pieces of 3 x 3 angle and weld the whole mess together to the mounting pipe. Cement the pipe in the ground with 6 bags. They won't be able to carry it. You'll need a grinder to service it or replace the panels Lol Good luck dude. -B- Sent from my

Re: [WISPA] 900Mhz sectors

Rick You need to search the model numvers on line and verify polarity. A lot of cell antennas are 45 degree cross pol. So they are not vert or horiz but stock in between. Jumpers for these are easy to find on Ebay. You need DIN male to N male. If 3' jumpers work for you hit me off list. I

  1   2   3   4   >