, 2010 11:58 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28
floor to a -75 or -80 too.
marlon
- Original Message -
From: Akinlolu Ajayi-Obe aajayi...@as-technologies.com
To: wireless@wispa.org
Sent: Tuesday, April 27, 2010 11:23 PM
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena
Ajayi-Obe aajayi...@as-technologies.com
Reply-To: aajayi...@as-technologies.com, WISPA General List
wireless@wispa.org
Date: Wed, 28 Apr 2010 06:23:28 +
To: wireless@wispa.org
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena
Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Akinlolu Ajayi-Obe
Sent: Wednesday, April 28, 2010 2:23 AM
To: wireless@wispa.org
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance is 7km. Is there anything I need to tweak or
watch out for? New to MT. I have setup a basic link and tested in the
office.
Thanks
Akin
Sent from my BlackBerryR
] On
Behalf Of Akinlolu Ajayi-Obe
Sent: Wednesday, April 28, 2010 2:23 AM
To: wireless@wispa.org
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance is 7km. Is there anything I need to tweak or
watch out for? New to MT. I
. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Akinlolu Ajayi-Obe
Sent: Wednesday, April 28, 2010 2:23 AM
To: wireless@wispa.org
Subject: [WISPA] MT PtP
I want to setup
Of Randy Cosby
Sent: Wednesday, April 28, 2010 10:39 AM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
FWIW I've been very pleased with the R52HN.
On 4/28/2010 8:30 AM, Josh Luthman wrote:
Have you used the r5h? The r52n is very disappointing.
On 4/28/10, Kurt Fankhauserk...@wavelinc.com
'
Subject: Re: [WISPA] MT PtP
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H
because their receive sensitivity is so much better. Plus you will use MMCX
connectors with these two cards which is going to save you a lot of
headaches over u.fl. Also definitely turn on N
11:59 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Wait, N-Stream will work with non-mikrotik cards? I thought it was locked
into only MT cards?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent
: Wednesday, April 28, 2010 11:58 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent
...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Wednesday, April 28, 2010 12:04 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
I run all my rb411/XR9 setups with nstream. Seams to keep em nice and
steady.
Steve Barnes
Manager
PCS-WIN
RC-WiFi Wireless Internet Service
Wireless Internet Service
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Robert West
Sent: Wednesday, April 28, 2010 12:11 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
With one radio. So if using one radio, do you add
Yep, you're right. Wasn't aware of using on single card. Thanks!
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Wednesday, April 28, 2010 12:22 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
I think
...@as-technologies.com; 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H
because their receive sensitivity is so much better. Plus you will use MMCX
connectors with these two cards which is going to save you a lot
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, April 28, 2010 11:58 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun
: Wednesday, April 28, 2010 1:08 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Works good for me.
Robert West wrote:
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun
10:30 AM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Have you used the r5h? The r52n is very disappointing.
On 4/28/10, Kurt Fankhauser k...@wavelinc.com wrote:
What 350mw card are you using? I wouldn't use anything less than XR5 or
R5H
because their receive sensitivity is so much better
Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 2:25 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
How much throughput are you getting on the 900mhz with N-stream? 10mhz and
5mhz channels?
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
everything with them.
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 2:29 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Yes I have used the R5H and LOVE IT. Very nice card
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Yes I have used the R5H and LOVE IT. Very nice card and a good price. I
think it performs better than the XR5. However some people say that the card
burns up easily but I run them all locked at 20db power output for all the
modulation rates. I do
: Wednesday, April 28, 2010 10:30 AM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Have you used the r5h? The r52n is very disappointing.
On 4/28/10, Kurt Fankhauser k...@wavelinc.com wrote:
What 350mw card are you using? I wouldn't use anything less than XR5 or
R5H
because
Go figure.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, April 28, 2010 3:00 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Mmcx connector popped off???
On 4/28/10, Robert West robert.w...@just
...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Bret Clark
Sent: Wednesday, April 28, 2010 3:02 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
What is the general or best case throughput on these radios in PTP
configuration (speed/distance)? I googled for it, but saw a lot of very
old
, April 28, 2010 3:00 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Mmcx connector popped off???
On 4/28/10, Robert West robert.w...@just-micro.com wrote:
I've had two burn out from the connector popping off for whatever reason.
I
learned to tape them on after that. But even with that, I
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, April 28, 2010 3:09 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Oh, no, not the MMCX! That stupid U.fl crap. Love the MMCX.
All my MT cards are u.fl, I couldn't afford the MMCX MT
afford the MMCX MT. Crazy premium for
good connectors.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, April 28, 2010 3:00 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Mmcx connector
] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 3:30 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Some people say there is 1db or 2db loss on the pigtail due to the MMCX
connector. This is not the MMCX connectors fault but it is due to the
connector being a right angle
-
From: Josh Luthman j...@imaginenetworksllc.com
To: WISPA General List wireless@wispa.org
Sent: Wednesday, April 28, 2010 3:30 PM
Subject: Re: [WISPA] MT PtP
For ufl use hot glue. Works wonders. Little dab around the connector
and another to attach the coax to the minipci board for leverage
I use a hammer. works well.
- Original Message -
From: Josh Luthman j...@imaginenetworksllc.com
To: WISPA General List wireless@wispa.org
Sent: Wednesday, April 28, 2010 3:30 PM
Subject: Re: [WISPA] MT PtP
For ufl use hot glue. Works wonders. Little dab around the connector
Sent: Wednesday, April 28, 2010 3:30 PM
Subject: Re: [WISPA] MT PtP
For ufl use hot glue. Works wonders. Little dab around the connector
and another to attach the coax to the minipci board for leverage.
On 4/28/10, Robert West robert.w...@just-micro.com wrote:
Oh, no, not the MMCX
Subject: Re: [WISPA] MT PtP
Works good for me.
Robert West wrote:
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April
Noted. Thanks, Rick!
You da man!
- Original Message -
From: RickG rgunder...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, April 29, 2010 12:11 AM
Subject: Re: [WISPA] MT PtP
That helps with the frustration! I recommend a 5 pound sledge :)
On Thu, Apr 29, 2010
Rick, I love ya. If you were a woman I'd divorce ya though.
- Original Message -
From: Robert West robert.w...@just-micro.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, April 29, 2010 1:04 AM
Subject: Re: [WISPA] MT PtP
Noted. Thanks, Rick!
You da man
List wireless@wispa.org
Sent: Thursday, April 29, 2010 1:04 AM
Subject: Re: [WISPA] MT PtP
Noted. Thanks, Rick!
You da man!
- Original Message -
From: RickG rgunder...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, April 29, 2010 12:11 AM
Subject: Re
35 matches
Mail list logo