There's a tower site that has mutliple towers. I'm wanting to mount a 5.8GHz
Trango TLink-10 for a 24-mile link in such a way that it will hit a couple sets
of guy wires from other towers about 100-200 yards away. I've not come across
this situation yet. Are there any issues or problems with
No. You won't even notice they are there. Install away. :)
Travis
Microserv
Mark Nash wrote:
There's a tower site that has mutliple towers. I'm wanting to mount a 5.8GHz
Trango TLink-10 for a 24-mile link in such a way that it will hit a couple sets
of guy wires from other towers about
Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: Butch Evans [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thursday, September 21, 2006 10:42 PM
Subject: Re: [WISPA] PTP Link Recommendations
On Thu, 21 Sep 2006, Tom DeReggi wrote:
Just
I don't know if you are right or wrong Tom...only time will tell...but I'm
clapping!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom DeReggi
Sent: Friday, September 22, 2006 2:15 PM
To: WISPA General List
Subject: Re: [WISPA] PTP Link Recommendations
On Fri, 22 Sep 2006, Tom DeReggi wrote:
I'm jsut saying readers may misinterperete the post if my
statements were not added.
The parts that you added, though, were specifically related to the
radio portion of the network (and you were correct there), but it
has nothing to do with what we
PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, September 22, 2006 5:31 PM
Subject: Re: [WISPA] PTP Link Recommendations - The Future of WISPs
On Fri, 22 Sep 2006, Tom DeReggi wrote:
I'm jsut saying readers may misinterperete the post if my
statements were not added
I have a potential customer that is looking to replace a fiber link with wireless. Need best recommendation for a 1.5mile clear LOS shot. Bridge as it is to replace a fiber link that goes switch to switch. And probably 45Mbps would be good.
Scott Reed
Owner
NewWays
Wireless
Scott,
P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps
full-duplex (90Mbps total). Total equipment cost less than $3,000.
Check on ebay.
Travis
Microserv
Scott Reed wrote:
I have a potential customer that is looking to replace
a fiber link with wireless. Need
Travis Johnson wrote:
P-com 38ghz with DS3 to ethernet converters. 1ms ping times, 45Mbps
full-duplex
(90Mbps total). Total equipment cost less than $3,000. Check on ebay.
As long as it doesn't rain. :)
Seriously, I've got two pair of these, and while they're rock-solid most
of the time, I
This is what I would buy to replace a fiber in this case:
http://www.alvarion.com/B100/?ref=wispabanner
Scott Reed wrote:
I have a potential customer that is looking to replace a fiber link
with wireless. Need best recommendation for a 1.5mile clear LOS
shot. Bridge as it is to replace a
David,
What are your signal levels on each side (the actual RSSI using the
management program)?
Even at 1.5 miles, with 2ft dishes I show you should have a -26db RSSI
and total downtime during a 1 year period of 7 minutes. (99.9%
uptime).
Travis
Microserv
David E. Smith wrote:
heavy mounts sometimes as
large as 4 ID. Cant afford to have this stuff move.
grin
Best,
Brad
-Original
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Of Travis Johnson
Sent: Thursday, September 21, 2006
3:09 PM
To: WISPA General List
Subject: Re: [WISPA] PTP
On Thu, September 21, 2006 3:09 pm, Travis Johnson wrote:
What are your signal levels on each side (the actual RSSI using the
management program)?
I'd have to drive over to one end (or the other) to look, but IIRC, on
that longer link, it shows a signal of about -40 or so.
The link may
.
Patrick
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Reed
Sent: Thursday, September 21, 2006
1:34 PM
To: WISPA General List
Subject: Re: [WISPA] PTP Link
Recommendations
What about unlicensed? Anything that can do this link well?
Scott Reed
Owner
NewWays
nistration
www.nwwnet.net
-- Original Message ---
From: "David E. Smith" [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thu, 21 Sep 2006 14:57:21 -0500
Subject: Re: [WISPA] PTP Link Recommendations
Travis Johnson wrote:
P-com 38ghz with DS3 to
www.nwwnet.net http://www.nwwnet.net/
*-- Original Message ---*
From: David E. Smith [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thu, 21 Sep 2006 14:57:21 -0500
Subject: Re: [WISPA] PTP Link Recommendations
Travis Johnson wrote:
P-com 38ghz with DS3
On Thu, 21 Sep 2006, Matt Larsen - Lists wrote:
I've heard of some folks using an OSPF router on both ends and two
hdx backhaul radios to simulate FDD, with excellent results.
Added benefit of having a backup link already in place if one radio
fails. I will be trying this on my next set of
:52 PM
Subject: Re: [WISPA] PTP Link Recommendations
On Thu, 21 Sep 2006, Matt Larsen - Lists wrote:
I've heard of some folks using an OSPF router on both ends and two hdx
backhaul radios to simulate FDD, with excellent results. Added benefit of
having a backup link already in place if one radio
On Thu, 21 Sep 2006, Tom DeReggi wrote:
Just remember OSPF does not detect packet loss, and does not
properly switch to backup channels or switches to frequently
between channels on marginal links. So when you use two spectrum
channels for 1 link, you double your chance that the link will get
- Original Message -
From: Jory Privett [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, October 07, 2005 10:08 AM
Subject: Re: [WISPA] PTP Link
About 10M and pretty reliable. I am currently looking at the Orthogon
Gemini Lite but would like something a little
meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
- Original Message -
From: Jory Privett [EMAIL PROTECTED]
To: WISPA List wireless@wispa.org
Sent: Wednesday, October 05, 2005 3:14 PM
Subject: [WISPA] PTP Link
I am trying to do a 21 mile PtP link and need some
I am trying to do a 21 mile PtP link and need some equipment. I so far I
would like to have an Orthogon Gemini Lite but the price tag is pretty
high. Is there anything out there that would work as well but be a little
more cost effective? Would someone happen to have some used/refurbish
if your looking for a low cost link, you might want to check out
Star-Os and their new StarVX WAR boards.
They do 5, 10, and 20MHz channel spacing and are only like 320.00 or so
for each end.
They do bridging as well.
www.Star-Os.com
George
Jory Privett wrote:
I am trying to do a 21 mile
sorry, it's 335.00 each end, but you get an extra card.
http://www.star-os.com/prices.php
George
George wrote:
if your looking for a low cost link, you might want to check out
Star-Os and their new starVX WAR boards.
They do 5, 10, and 20MHz channel spacing and are only like 320.00 or so
Sent: Wed, 5 Oct 2005 17:14:32 -0500
Subject: [WISPA] PTP Link
I am trying to do a 21 mile PtP link and need some equipment. I so far I
would like to have an Orthogon Gemini Lite but the price tag is pretty
high. Is there anything out there that would work as well but be a little
more cost
25 matches
Mail list logo
