I use a MT client radio and set it up to do routing, then put a Belkin router
behind my radio and put it into AP mode. The MT does all the routing and the
Belkin is just a switch and AP... Job done.
Chris
- Original Message -
From: David E. Smith
To: WISPA General List
Sent:
I've mounted J-poles like that, just not sideways! But it is good way to
shoot under trees and what not.
Chris
- Original Message -
From: Steve Barnes st...@pcswin.com
To: WISPA General List wireless@wispa.org
Sent: Friday, July 16, 2010 12:42 PM
Subject: Re: [WISPA] Friday Laugh
Well maybe instead of having these huge frickin applications for millions
and dollars there should be easier access to say $100,000. I could cover a
lot of area here in Oklahoma if I could get simple easy funding.
Chris
- Original Message -
From: MDK rea...@muddyfrogwater.us
To: WISPA
It's definitely working good for us.
Chris
- Original Message -
From: Josh Luthman
To: WISPA General List
Sent: Friday, July 23, 2010 12:44 PM
Subject: Re: [WISPA] IPPay
It's freaking awesome.
Low cost. It works.
On Jul 23, 2010 1:38 PM, RickG
We're using freeside.
Chris
- Original Message -
From: Chris Hudson
To: WISPA General List
Sent: Friday, July 23, 2010 12:50 PM
Subject: Re: [WISPA] IPPay
It's definitely working good for us.
Chris
- Original Message -
From: Josh Luthman
To: WISPA
Yeah, I want to watch a video of that.
Chris
- Original Message -
From: Jason Bailey
To: wireless@wispa.org
Sent: Saturday, August 21, 2010 12:27 PM
Subject: [WISPA] shielded termination
http://www.vpi.us/installation/assemble-cat5eshld.html
I have some Nstreme2 ptp's that are using MTI Dual Pol Panel antennas that work
great. But now I have a Pacwireless Dual Pol 2ft dish and when I am running
with 1 radio in half duplex it works great, and it doesn't matter what
polarization - V or H. As long as one pol is running at a time. And
, Chris Hudson wrote:
I have some Nstreme2 ptp's that are using MTI Dual Pol Panel antennas that
work great. But now I have a Pacwireless Dual Pol 2ft dish and when I am
running with 1 radio in half duplex it works great, and it doesn't matter what
polarization - V or H. As long as one pol
Would have been nice last week for me when my DS3 dumped. I wouldn't have cared
if my customers were natted, as long as the had internet 99% would have been
happy.
Chris
- Original Message -
From: David E. Smith
To: WISPA General List
Sent: Thursday, August 26, 2010 4:59 PM
Cool, have you used those? How reliable are they?
Chris
- Original Message -
From: Phil Curnutt
To: WISPA General List
Sent: Friday, August 27, 2010 6:03 PM
Subject: Re: [WISPA] DC Remote reboot?
Inscape LPS-1000 POE Switch, with reboot capabilites. It will run off
Aren't there some that have a floating leg.
Chris
- Original Message -
From: Mike Hammett wispawirel...@ics-il.net
To: WISPA General List wireless@wispa.org
Sent: Wednesday, September 08, 2010 12:49 PM
Subject: Re: [WISPA] Commercial rooftop - Tripod
I had thought about a non
, Sep 8, 2010 at 2:03 PM, Chris Hudson ch...@htswireless.com wrote:
Aren't there some that have a floating leg.
Chris
- Original Message -
From: Mike Hammett wispawirel...@ics-il.net
To: WISPA General List wireless@wispa.org
Sent: Wednesday, September 08, 2010 12:49
We're fans of the structural steel pipes for the local metal shop. It needs
painting, but definitly weldable... We use the 1.5 ID It has just under 2
OD.
Chris
- Original Message -
From: Robert West robert.w...@just-micro.com
To: 'WISPA General List' wireless@wispa.org
Sent: Wednesday,
We did that same thing with radio mobile a little photoshoping, and google API
http://htswireless.com/coveragearea.php free. I still have to get the site laid
out more properly, oh the todo list
Chris
- Original Message -
From: Josh Luthman
To: WISPA General List
Sent:
Not at all, I have 95 I think with 2-5 miles.
Chris
- Original Message -
From: ~NGL~ n...@ngl.net
To: WISPA General List wireless@wispa.org
Sent: Saturday, September 11, 2010 5:43 PM
Subject: [WISPA] Wind Turbines
Anyone have experience with a wind farm coming into their area. They
I have 50 to 70 clients on a b MT AP and it handles it fine. I've even heard
of over 100 on a only-g MT AP.
Chris
- Original Message -
From: Steve Barnes st...@pcswin.com
To: WISPA General List wireless@wispa.org
Sent: Monday, September 13, 2010 1:16 PM
Subject: Re: [WISPA] Taking the
c:\windows\system32
- Original Message -
From: Jerry Richardson
To: motor...@afmug.com ; WISPA General List
Sent: Tuesday, September 14, 2010 6:37 PM
Subject: [WISPA] Radio Mobile reload
Had to reload Radio Mobile. Keeps complaing that it can't find rmwdlx32.DLL
Yes, wisp-router.com usually has them. You just unscrew the 4 screws around
the dipole and screw in the dual pol feedhorn.
Chris
- Original Message -
From: Chris Gotstein ch...@uplogon.com
To: WISPA General List wireless@wispa.org; motor...@afmug.com
Sent: Friday, September 17, 2010
I have the whole 59.0.0.0/8 and 61.0.0.0/8 input chain dropped on my core
router...
Chris
- Original Message -
From: Robert West
To: 'WISPA General List'
Sent: Friday, October 01, 2010 4:57 PM
Subject: [WISPA] Brute Force Attack on Mikrotik Gateway
Just had to deal with
We've got a 60' with 18 face and solid steel legs freestanding. Been up for
probably 2 1/2 years.
Chris
- Original Message -
From: RickG
To: WISPA General List
Sent: Tuesday, October 05, 2010 11:45 PM
Subject: Re: [WISPA] Looking for a real tower
Thats all? Its gotta
Is there somewhere on the WISPA site the has some sample contracts? I'm not
having much luck. OR does anyone have one I could adapt.
Chris
WISPA Wants You! Join today!
http://signup.wispa.org/
On Oct 9, 2010, at 3:57 PM, Chris Hudson wrote:
Is there somewhere on the WISPA site the has some sample contracts? I'm not
having much luck. OR does anyone have one I could adapt.
Chris
WISPA Wants
, Chris Hudson wrote:
Is there somewhere on the WISPA site the has some sample contracts? I'm not
having much luck. OR does anyone have one I could adapt.
Chris
WISPA Wants You! Join today!
http
I have a water guy for the town that's concerned about maintenance issues?? I
plan to attach pipe to the railing around the fat part of the tower, so there
shouldn't be anything major.
Chris
- Original Message -
From: Chris Hudson
To: WISPA General List
Sent: Saturday
I have a friend's sister that lives outside the town of Bristow, OK. Does
anyone know who might service up there?
Thanks,
Chris
WISPA Wants You! Join today!
http://signup.wispa.org/
.
- Original Message -
From: Chris Hudson ch...@htswireless.com
To: WISPA General List wireless@wispa.org
Sent: Tuesday, October 12, 2010 11:54 AM
Subject: [WISPA] Service around Bristow, OK
I have a friend's sister that lives outside the town of Bristow, OK. Does
anyone know who might
the direction of the tower.
Don't take your organs to heaven,
heaven knows we need them down here!
Be an organ donor, sign your donor card today.
- Original Message -
From: Chris Hudson ch...@htswireless.com
To: WISPA General List wireless@wispa.org
Sent: Tuesday, October 12, 2010 1:57
I was talking to one of my water tower guys, the town water/sewage/fire type
guy and they are going to for town/emergency management etc us put theirs 10m up
Chris
- Original Message -
From: Dennis Burgess
To: WISPA General List
Sent: Tuesday, September 21, 2010 8:42 AM
I don't use gel filled. I use Belden 1300A and it doesn't give he much
trouble at all.
Chris
The biggest problem for me is the sticky gel. I take some isopropyl
alcohol wipes up to clean the wires off and that helps a lot.
On Fri, Nov 12, 2010 at 7:42 PM, ch...@htswireless.com wrote:
I've
I've ordered from Tessco a bracket that is designed for telephone poles, it has
an all thread that goes all the way through the pole.
Scott Reed sr...@nwwnet.net wrote:
I have a customer location where we have mounted the antenna on a
satellite arm at the top of a 30' telephone pole. We need
Some cable provides latch onto the Mac address of the device being plugged into
it. And you have to reset the cable modem.
Chris
Greg Ihnen os10ru...@gmail.com wrote:
I posted this on the MT forum but I wanted to throw it out here too. Thanks.
I've got an RB-750 that I want to replace with
Is this just while using the Jack? Via POE, 24V is the way to go.. IMO.
Do you want to make a full conversion to DC? Or just replace the typical UPS
setup?
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Justin Wilson
Sent: Tuesday, September
+1
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Scott Reed
Sent: Tuesday, September 20, 2011 12:09 PM
To: WISPA General List
Subject: Re: [WISPA] Power for tower sites
I have heard that, but I have 100's of 411s all powered with PacWireless 24V
POE.
We
:
Whatever works best for reasonable $ :-) it's been a nightmare so far.
Starting to upset customers.
Sent from my iPhone
On Sep 20, 2011, at 11:55 AM, Chris Hudson ch...@htswireless.com wrote:
Is this just while using the Jack? Via POE, 24V is the way to go.. IMO.
Do you want to make a full
ERF Wireless serves most of those. I'm pretty sure.
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of rwf
Sent: Monday, October 10, 2011 9:50 AM
To: 'WISPA General List'
Subject: [WISPA] Do you serve these areas in Texas?
Odessa TX
Sherman TX
Who has preorder on these? And is there an ETA yet?
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of James Howard
Sent: Monday, March 26, 2012 2:30 PM
To: WISPA General List
Subject: Re: [WISPA] UBNT AirFiber Radio Pics
The picture they showed was
We've been using those TP-Link TL-WR841N's from Newegg for about 31 free
shipping. Price and shipping fluctuates. But the have a good range,
detachable antennas to use even bigger antennas.
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Darin
We also use those routers for a basic install.
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Chris Fabien
Sent: Thursday, April 26, 2012 1:41 PM
To: WISPA General List
Subject: Re: [WISPA] Customer Routers
We use TP-Link WR340G and can usually
Yeah, Josh I don't get that. I've got at least a half dozen at in various
locations, and have had no problems with them. Order a new one and chunk
that one. I still haven't found an antenna to use as an external on those..
Chris
From: wireless-boun...@wispa.org
We use Freeside that uses IPPAY to initiate the autodrafts.
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of ch...@mycountrylink.com
Sent: Tuesday, May 15, 2012 9:19 AM
To: wireless@wispa.org
Subject: [WISPA] EFT Billing
How do you do your EFT
Looked fine on my Android, I could zoom the pics.
Chris
Sent from my Samsung Galaxy S II on ATTFred Goldstein fgoldst...@ionary.com
wrote: At 7/29/2012 01:18 PM, Greg Ihnen wrote:
I couldn't see it either. I just get taken to a page with 1 album and 0 pics,
and a spinning wheel.
The
I use the industrial ones from automationdirect.com they have a plastic case for about 200 and a metal case for 300 I think.ChrisSent from my Samsung Galaxy S II on ATT ~NGL~ n...@ngl.net wrote:
What I have is 7 AP's on a tower. I need to connect tnem
a togeather as you would using a switch.
http://www.automationdirect.com/adc/Shopping/Catalog/Communications/Ethernet/Ethernet_Switches/Unmanaged_Ethernet_Switches
174 and 260 for plastic case and metal/wide temperature range.
Sent from my Samsung Galaxy S II on ATT~NGL~ n...@ngl.net wrote:My main
concern is power usage as these
I'm using a RB2011LS-IN on a gigabit fiber that I have 100mb service an it's
working great so far.
Chris
Sent from my Samsung Galaxy S II on ATTDave Barker
d...@broadlincwireless.com wrote:I'm upgrading my data from the provider.
It's fiber right now but hands off from the provider as
It seems to me that the price is pretty much the same when sm vs mm, just
goes up depending on the distance the sfp needs to go. For my application I
needed to get an 80km sm version And it was 245 from aaxeon.com
Chris
-Original Message-
From: wireless-boun...@wispa.org
I'm in need of a connection in Wagoner Friday night for a football game to
stream video. I would like at least 2M/2M.
Thanks!
Chris Hudson
Hudson Technology Solutions, Inc.
214 W Main St
Weatherford, OK 73096
Office: 580-772-2224
Cell: 580-774-9579
We're being dropped as well. Although I admit that we have had a few months in
a row that we didn't sell any.
Sent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone
Original message
From: Paul Diem pcd...@foxvalley.net
Date: 12/27/2012 3:22 PM (GMT-06:00)
To:
Could you use a cheap 400w power inverter running off of the 12v plug that
most generators have?
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Forrest Christian (List Account)
Sent: Wednesday, May 08, 2013 4:14 PM
To: WISPA General List
Subject:
Watts are the same regardless the voltage. Volts x amps = watts.ChrisSent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone Original message From: Josh Luthman j...@imaginenetworksllc.com Date: 09/24/2013 6:06 PM (GMT-06:00) To: WISPA General List wireless@wispa.org
I noticed while on one of the websites that those are not outdoor rated,
indoor only.
Chris
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Bob Man Van Kim
Sent: Friday, November 08, 2013 10:31 PM
To: WISPA General List
Subject: Re: [WISPA] Network
We’ve been streaming live video of our local high school games for 5 years now.
It’s amazing how many people will watch the games when it’s either a playoff
game or if the team is doing very good. And of course how few will watch when
the team is doing poorly..
Chris
From:
I have a customer with an old telephone pole that wasn't used up the hill
from his house and I put the following: (My costs)
1x Solar Cynergy 100W 12V panel - $125+shipping
1x Morningstar Sunsaver SS-10 10A, 12V Pwm Charge Controller $44.46+shipping
2x 35Ah SLA Batteries $65+tax each
2x
for current and one for cat-5? Anything
to keep pests out of those sweeps?
Do you insulate around the battery to prolong battery life during those
long cold spells?
Thanks.
On 4/8/2014 5:01 PM, Chris Hudson wrote:
I have a customer with an old telephone pole that wasn't used up the hill
from his house
+1 I have been buying my panels from Solar Blvd as well.
Sent via the Samsung Galaxy Note® II, an ATT 4G LTE smartphone
div Original message /divdivFrom: Marlon Schafer
(509.982.2181) o...@odessaoffice.com /divdivDate:04/18/2014 4:41 PM
(GMT-06:00) /divdivTo: WISPA General
I built a Mikrotik cellular 3G/4G/LTE device last year and the Mini-pcie card
that I used was the Sierra Wireless AirPrime MC7700. At the time with ROS 5.x
the drivers sucked bad and wouldn’t stay connected. This week I pulled it back
out and installed ROS 6.13 and so far it has worked good.
www.atlinkwifi.com is currently in and around Tulsa, I believe that they are
WISPA members.
Chris Hudson
Hudson Technology Solutions, Inc.
214 W Main St.
Weatherford, OK 73096
Office: 580-772-2224
ch...@htswireless.com
From: wireless-boun...@wispa.org [mailto:wireless
About the only wisp around Yukon would be Atlinkwifi.com
Chris
Sent via the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone
div Original message /divdivFrom: Walter W. Stumpf Jr.
w...@aol.com /divdivDate:09/09/2014 9:51 PM (GMT-06:00) /divdivTo:
WISPA General List
I'm using the aNag app for android. It gives you alerts and what not.
Chris
Sent via the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone
div Original message /divdivFrom: George Rogato
wi...@oregonfast.net /divdivDate:01/09/2015 7:57 PM (GMT-06:00)
/divdivTo: WISPA General
58 matches
Mail list logo
