RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
They come with the standard u-bolts, but they will accommodate a 4" u-bolt as well (at this point we are not offering a 4" u-bolt, but might in the future if there is enough demand). I think most measurements are based on the outside diameter so the 2" galvanized pipe would work with our standard u-bolt. Ben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Rogato Sent: Thursday, January 04, 2007 11:41 AM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Does this mount fit around a 2" galvi pipe? I think a 2" galvi pipe has outside dimensions of 2 3/8" Nt quite sure. George Marketing wrote: > Sorry Mark. I should have explained in more detail. > > The 5200223 is the complete hardware kit with the heavy duty L-Bracket > included. This is setup to be used on the wire grids. > > The 5200224 is the complete hardware kit with the heavy duty L-Bracket > included. This is setup to be used on the die cast grids. > > The L-Bracket can be purchased separately if you already have all of the > hardware (U-Bolts, pipe clamps, screws, nuts, etc...). > > Let me know if there are any other questions. > > Thanks, > Ben Moore > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Thursday, January 04, 2007 9:58 AM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > ok, we're close... Help me out. I'm not familiar with your grid antennas at > all, and therefore not familiar with your mounts, and I'm sure that others > aren't as well. > > You mentioned: > >> 5600687 - L-Bracket Only >> 5200223 - Wire Grid Bracket kit >> 5200224 - Die Cast Bracket kit > > So what we will need if we have a grid dish is a 5600687 and a 5200223, or > do we need all 3 parts to make the HD mount work? > > Thanks for your patience... > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998-5555 > 541-998-5599 fax > > - Original Message - > From: "Marketing" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Thursday, January 04, 2007 8:53 AM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > >> The L-Bracket is the main difference. The hardware included in the kit is >> also a bit different due to the fact that the L-Bracket is tapped. >> >> Thanks, >> Ben Moore >> [EMAIL PROTECTED] >> >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Mark Nash - Lists >> Sent: Thursday, January 04, 2007 9:22 AM >> To: WISPA General List >> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> Thanks...to confirm... >> >> It sounds like the only thing that is different is the L-Bracket to make > it >> the HDGD5X-XX? >> >> Mark Nash >> Network Engineer >> UnwiredOnline.Net >> 350 Holly Street >> Junction City, OR 97448 >> http://www.uwol.net >> 541-998- >> 541-998-5599 fax >> >> - Original Message - >> From: "Marketing" <[EMAIL PROTECTED]> >> To: "'WISPA General List'" >> Sent: Thursday, January 04, 2007 7:47 AM >> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> >>> Hello Mark, >>> >>> Yes, the new model will work fine with the stock that distributors have > on >>> hand or parts that have been shipped in the past. >>> >>> The parts can be purchased separately. Part #'s are as follows: >>> >>> 5600687 - L-Bracket Only >>> 5200223 - Wire Grid Bracket kit >>> 5200224 - Die Cast Bracket kit >>> >>> Regards, >>> Ben Moore >>> [EMAIL PROTECTED] >>> >>> >>> -Original Message- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >>> Behalf Of Mark Nash - Lists >>> Sent: Wednesday, January 03, 2007 11:45 PM >>> To: WISPA General List >>> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion >>> >>> Ben, >>> >>> A) Will these fit the models that the resellers have in stock now? >>> B) If so, can we order mounts separately? >>> >>> Mark Nash >>> Network Engineer >>> UnwiredOnline.Net >>> 350 Holly Street >>> Junction City, OR 97448 >>> http://www.uwol.
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Does this mount fit around a 2" galvi pipe? I think a 2" galvi pipe has outside dimensions of 2 3/8" Nt quite sure. George Marketing wrote: Sorry Mark. I should have explained in more detail. The 5200223 is the complete hardware kit with the heavy duty L-Bracket included. This is setup to be used on the wire grids. The 5200224 is the complete hardware kit with the heavy duty L-Bracket included. This is setup to be used on the die cast grids. The L-Bracket can be purchased separately if you already have all of the hardware (U-Bolts, pipe clamps, screws, nuts, etc...). Let me know if there are any other questions. Thanks, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Thursday, January 04, 2007 9:58 AM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion ok, we're close... Help me out. I'm not familiar with your grid antennas at all, and therefore not familiar with your mounts, and I'm sure that others aren't as well. You mentioned: 5600687 - L-Bracket Only 5200223 - Wire Grid Bracket kit 5200224 - Die Cast Bracket kit So what we will need if we have a grid dish is a 5600687 and a 5200223, or do we need all 3 parts to make the HD mount work? Thanks for your patience... Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 8:53 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion The L-Bracket is the main difference. The hardware included in the kit is also a bit different due to the fact that the L-Bracket is tapped. Thanks, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Thursday, January 04, 2007 9:22 AM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks...to confirm... It sounds like the only thing that is different is the L-Bracket to make it the HDGD5X-XX? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 7:47 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Hello Mark, Yes, the new model will work fine with the stock that distributors have on hand or parts that have been shipped in the past. The parts can be purchased separately. Part #'s are as follows: 5600687 - L-Bracket Only 5200223 - Wire Grid Bracket kit 5200224 - Die Cast Bracket kit Regards, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Wednesday, January 03, 2007 11:45 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Ben, A) Will these fit the models that the resellers have in stock now? B) If so, can we order mounts separately? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Tuesday, January 02, 2007 10:32 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Hello Tim, When purchasing the grids the next time, select the HDGD58-29 antennas. These come with a new L-Bracket that attaches to the reflector in 4 locations. The L-Bracket is also tapped for easy installation. This can be seen on page 2 of the spec sheet: http://pacwireless.com/products/GD58_Data_Sheet.pdf If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not provided). Drop me your address and we can send you a sample of the L-bracket. Let me know if you have any questions. Regards, Ben Moore Sales Manager Pacific Wireless [EMAIL PROTECTED] -Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Kerns Sent: Saturday, December 30, 2006 6:48 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. ----- Original Message ----- From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Sorry Mark. I should have explained in more detail. The 5200223 is the complete hardware kit with the heavy duty L-Bracket included. This is setup to be used on the wire grids. The 5200224 is the complete hardware kit with the heavy duty L-Bracket included. This is setup to be used on the die cast grids. The L-Bracket can be purchased separately if you already have all of the hardware (U-Bolts, pipe clamps, screws, nuts, etc...). Let me know if there are any other questions. Thanks, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Thursday, January 04, 2007 9:58 AM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion ok, we're close... Help me out. I'm not familiar with your grid antennas at all, and therefore not familiar with your mounts, and I'm sure that others aren't as well. You mentioned: > 5600687 - L-Bracket Only > 5200223 - Wire Grid Bracket kit > 5200224 - Die Cast Bracket kit So what we will need if we have a grid dish is a 5600687 and a 5200223, or do we need all 3 parts to make the HD mount work? Thanks for your patience... Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 8:53 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > The L-Bracket is the main difference. The hardware included in the kit is > also a bit different due to the fact that the L-Bracket is tapped. > > Thanks, > Ben Moore > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Thursday, January 04, 2007 9:22 AM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Thanks...to confirm... > > It sounds like the only thing that is different is the L-Bracket to make it > the HDGD5X-XX? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > > ----- Original Message - > From: "Marketing" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Thursday, January 04, 2007 7:47 AM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Hello Mark, > > > > Yes, the new model will work fine with the stock that distributors have on > > hand or parts that have been shipped in the past. > > > > The parts can be purchased separately. Part #'s are as follows: > > > > 5600687 - L-Bracket Only > > 5200223 - Wire Grid Bracket kit > > 5200224 - Die Cast Bracket kit > > > > Regards, > > Ben Moore > > [EMAIL PROTECTED] > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Mark Nash - Lists > > Sent: Wednesday, January 03, 2007 11:45 PM > > To: WISPA General List > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Ben, > > > > A) Will these fit the models that the resellers have in stock now? > > B) If so, can we order mounts separately? > > > > Mark Nash > > Network Engineer > > UnwiredOnline.Net > > 350 Holly Street > > Junction City, OR 97448 > > http://www.uwol.net > > 541-998- > > 541-998-5599 fax > > - Original Message - > > From: "Marketing" <[EMAIL PROTECTED]> > > To: "'WISPA General List'" > > Sent: Tuesday, January 02, 2007 10:32 AM > > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > > > Hello Tim, > > > > > > When purchasing the grids the next time, select the HDGD58-29 antennas. > > > These come with a new L-Bracket that attaches to the reflector in 4 > > > locations. The L-Bracket is also tapped for easy installation. This > can > > > be > > > seen on page 2 of the spec sheet: > > > > > > http://pacwireless.com/products/GD58_Data_Sheet.pdf > > > > > > If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts > not > > > provided). > > > > > > Drop me your address and we can send you a sample of the L-bracket. > > > > > > Let me know if you have any questions. > > > > > > Regards, > > > Ben Moore > > > Sales Manager > > > Pacific Wireless
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
ok, we're close... Help me out. I'm not familiar with your grid antennas at all, and therefore not familiar with your mounts, and I'm sure that others aren't as well. You mentioned: > 5600687 - L-Bracket Only > 5200223 - Wire Grid Bracket kit > 5200224 - Die Cast Bracket kit So what we will need if we have a grid dish is a 5600687 and a 5200223, or do we need all 3 parts to make the HD mount work? Thanks for your patience... Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 8:53 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > The L-Bracket is the main difference. The hardware included in the kit is > also a bit different due to the fact that the L-Bracket is tapped. > > Thanks, > Ben Moore > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Thursday, January 04, 2007 9:22 AM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Thanks...to confirm... > > It sounds like the only thing that is different is the L-Bracket to make it > the HDGD5X-XX? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > > ----- Original Message - > From: "Marketing" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Thursday, January 04, 2007 7:47 AM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Hello Mark, > > > > Yes, the new model will work fine with the stock that distributors have on > > hand or parts that have been shipped in the past. > > > > The parts can be purchased separately. Part #'s are as follows: > > > > 5600687 - L-Bracket Only > > 5200223 - Wire Grid Bracket kit > > 5200224 - Die Cast Bracket kit > > > > Regards, > > Ben Moore > > [EMAIL PROTECTED] > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Mark Nash - Lists > > Sent: Wednesday, January 03, 2007 11:45 PM > > To: WISPA General List > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Ben, > > > > A) Will these fit the models that the resellers have in stock now? > > B) If so, can we order mounts separately? > > > > Mark Nash > > Network Engineer > > UnwiredOnline.Net > > 350 Holly Street > > Junction City, OR 97448 > > http://www.uwol.net > > 541-998- > > 541-998-5599 fax > > - Original Message - > > From: "Marketing" <[EMAIL PROTECTED]> > > To: "'WISPA General List'" > > Sent: Tuesday, January 02, 2007 10:32 AM > > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > > > Hello Tim, > > > > > > When purchasing the grids the next time, select the HDGD58-29 antennas. > > > These come with a new L-Bracket that attaches to the reflector in 4 > > > locations. The L-Bracket is also tapped for easy installation. This > can > > > be > > > seen on page 2 of the spec sheet: > > > > > > http://pacwireless.com/products/GD58_Data_Sheet.pdf > > > > > > If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts > not > > > provided). > > > > > > Drop me your address and we can send you a sample of the L-bracket. > > > > > > Let me know if you have any questions. > > > > > > Regards, > > > Ben Moore > > > Sales Manager > > > Pacific Wireless > > > [EMAIL PROTECTED] > > > > > > > > > -----Original Message- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > > Behalf Of Tim Kerns > > > Sent: Saturday, December 30, 2006 6:48 PM > > > To: WISPA General List > > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > > Mac, > > > Have PacWireless made any changes to the mount on the 29db grids... I > have > > > > > 4 > > > > > > in use and the mount isn't very solid. The grid deflects a lot in the > > > wind. > > > I can watch the signal go up and down as it moves. > > > Tim Kerns > > > CV
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
The L-Bracket is the main difference. The hardware included in the kit is also a bit different due to the fact that the L-Bracket is tapped. Thanks, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Thursday, January 04, 2007 9:22 AM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks...to confirm... It sounds like the only thing that is different is the L-Bracket to make it the HDGD5X-XX? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 7:47 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > Hello Mark, > > Yes, the new model will work fine with the stock that distributors have on > hand or parts that have been shipped in the past. > > The parts can be purchased separately. Part #'s are as follows: > > 5600687 - L-Bracket Only > 5200223 - Wire Grid Bracket kit > 5200224 - Die Cast Bracket kit > > Regards, > Ben Moore > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Wednesday, January 03, 2007 11:45 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Ben, > > A) Will these fit the models that the resellers have in stock now? > B) If so, can we order mounts separately? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > ----- Original Message ----- > From: "Marketing" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Tuesday, January 02, 2007 10:32 AM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Hello Tim, > > > > When purchasing the grids the next time, select the HDGD58-29 antennas. > > These come with a new L-Bracket that attaches to the reflector in 4 > > locations. The L-Bracket is also tapped for easy installation. This can > > be > > seen on page 2 of the spec sheet: > > > > http://pacwireless.com/products/GD58_Data_Sheet.pdf > > > > If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not > > provided). > > > > Drop me your address and we can send you a sample of the L-bracket. > > > > Let me know if you have any questions. > > > > Regards, > > Ben Moore > > Sales Manager > > Pacific Wireless > > [EMAIL PROTECTED] > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Tim Kerns > > Sent: Saturday, December 30, 2006 6:48 PM > > To: WISPA General List > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Mac, > > Have PacWireless made any changes to the mount on the 29db grids... I have > > > 4 > > > > in use and the mount isn't very solid. The grid deflects a lot in the > > wind. > > I can watch the signal go up and down as it moves. > > Tim Kerns > > CV-Access, Inc. > > > > - Original Message - > > From: "Mac Dearman" <[EMAIL PROTECTED]> > > To: "'WISPA General List'" > > Sent: Saturday, December 30, 2006 12:53 PM > > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > >>I do use their dishes where I have a large enough tower, water tower or a > >> roof. I will tell ya though - - the 29dbi grids are mighty fine, much > >> less > >> expensive than a solid dish, wind load is no comparison as well as the > >> ease > >> of mounting. If you are leasing tower space - - the grid is a no brainer > >> unless you have to have the extra db that comes with a dish. > >> > >> Mac Dearman > >> > >> -Original Message- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Mark Nash - Lists > >> Sent: Saturday, December 30, 2006 2:28 PM > >> To: WISPA General List > >> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > >> > >> Are we preferring their grids to dishes? > >> > >> Mark Nash > >> Network Engineer > >> UnwiredOnline.Net > >> 350 Holly Street > >> Junction City, OR 97448 > >> http://www.uwol.net > >> 541-9
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Thanks...to confirm... It sounds like the only thing that is different is the L-Bracket to make it the HDGD5X-XX? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Thursday, January 04, 2007 7:47 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > Hello Mark, > > Yes, the new model will work fine with the stock that distributors have on > hand or parts that have been shipped in the past. > > The parts can be purchased separately. Part #'s are as follows: > > 5600687 - L-Bracket Only > 5200223 - Wire Grid Bracket kit > 5200224 - Die Cast Bracket kit > > Regards, > Ben Moore > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Wednesday, January 03, 2007 11:45 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Ben, > > A) Will these fit the models that the resellers have in stock now? > B) If so, can we order mounts separately? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > ----- Original Message ----- > From: "Marketing" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Tuesday, January 02, 2007 10:32 AM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Hello Tim, > > > > When purchasing the grids the next time, select the HDGD58-29 antennas. > > These come with a new L-Bracket that attaches to the reflector in 4 > > locations. The L-Bracket is also tapped for easy installation. This can > > be > > seen on page 2 of the spec sheet: > > > > http://pacwireless.com/products/GD58_Data_Sheet.pdf > > > > If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not > > provided). > > > > Drop me your address and we can send you a sample of the L-bracket. > > > > Let me know if you have any questions. > > > > Regards, > > Ben Moore > > Sales Manager > > Pacific Wireless > > [EMAIL PROTECTED] > > > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Tim Kerns > > Sent: Saturday, December 30, 2006 6:48 PM > > To: WISPA General List > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Mac, > > Have PacWireless made any changes to the mount on the 29db grids... I have > > > 4 > > > > in use and the mount isn't very solid. The grid deflects a lot in the > > wind. > > I can watch the signal go up and down as it moves. > > Tim Kerns > > CV-Access, Inc. > > > > - Original Message - > > From: "Mac Dearman" <[EMAIL PROTECTED]> > > To: "'WISPA General List'" > > Sent: Saturday, December 30, 2006 12:53 PM > > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > >>I do use their dishes where I have a large enough tower, water tower or a > >> roof. I will tell ya though - - the 29dbi grids are mighty fine, much > >> less > >> expensive than a solid dish, wind load is no comparison as well as the > >> ease > >> of mounting. If you are leasing tower space - - the grid is a no brainer > >> unless you have to have the extra db that comes with a dish. > >> > >> Mac Dearman > >> > >> -Original Message- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Mark Nash - Lists > >> Sent: Saturday, December 30, 2006 2:28 PM > >> To: WISPA General List > >> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > >> > >> Are we preferring their grids to dishes? > >> > >> Mark Nash > >> Network Engineer > >> UnwiredOnline.Net > >> 350 Holly Street > >> Junction City, OR 97448 > >> http://www.uwol.net > >> 541-998- > >> 541-998-5599 fax > >> - Original Message - > >> From: "Mac Dearman" <[EMAIL PROTECTED]> > >> To: "'WISPA General List'" > >> Sent: Saturday, December 30, 2006 12:18 PM > >> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > >> > >> > >>> Mark, > >>>
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Hello Mark, Yes, the new model will work fine with the stock that distributors have on hand or parts that have been shipped in the past. The parts can be purchased separately. Part #'s are as follows: 5600687 - L-Bracket Only 5200223 - Wire Grid Bracket kit 5200224 - Die Cast Bracket kit Regards, Ben Moore [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Wednesday, January 03, 2007 11:45 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Ben, A) Will these fit the models that the resellers have in stock now? B) If so, can we order mounts separately? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Tuesday, January 02, 2007 10:32 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > Hello Tim, > > When purchasing the grids the next time, select the HDGD58-29 antennas. > These come with a new L-Bracket that attaches to the reflector in 4 > locations. The L-Bracket is also tapped for easy installation. This can > be > seen on page 2 of the spec sheet: > > http://pacwireless.com/products/GD58_Data_Sheet.pdf > > If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not > provided). > > Drop me your address and we can send you a sample of the L-bracket. > > Let me know if you have any questions. > > Regards, > Ben Moore > Sales Manager > Pacific Wireless > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Tim Kerns > Sent: Saturday, December 30, 2006 6:48 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Mac, > Have PacWireless made any changes to the mount on the 29db grids... I have > 4 > > in use and the mount isn't very solid. The grid deflects a lot in the > wind. > I can watch the signal go up and down as it moves. > Tim Kerns > CV-Access, Inc. > > ----- Original Message - > From: "Mac Dearman" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Saturday, December 30, 2006 12:53 PM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > >>I do use their dishes where I have a large enough tower, water tower or a >> roof. I will tell ya though - - the 29dbi grids are mighty fine, much >> less >> expensive than a solid dish, wind load is no comparison as well as the >> ease >> of mounting. If you are leasing tower space - - the grid is a no brainer >> unless you have to have the extra db that comes with a dish. >> >> Mac Dearman >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Mark Nash - Lists >> Sent: Saturday, December 30, 2006 2:28 PM >> To: WISPA General List >> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> Are we preferring their grids to dishes? >> >> Mark Nash >> Network Engineer >> UnwiredOnline.Net >> 350 Holly Street >> Junction City, OR 97448 >> http://www.uwol.net >> 541-998- >> 541-998-5599 fax >> - Original Message - >> From: "Mac Dearman" <[EMAIL PROTECTED]> >> To: "'WISPA General List'" >> Sent: Saturday, December 30, 2006 12:18 PM >> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> >>> Mark, >>> >>> I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi >>> grids, >>> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I >>> have >>> built a wireless network that covers 12% of Louisiana utilizing their >>> antennas exclusively for my BH. Well - I do have several of the Trango >>> dual >>> polarity ext's. >>> >>> Mac Dearman >>> >>> -Original Message- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >>> Behalf Of Mark Nash - Lists >>> Sent: Saturday, December 30, 2006 1:12 PM >>> To: WISPA General List >>> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion >>> >>> I have usually used Trango backhauls, so I have not had to worry about 5 >>> GHz >>> >>> antennas and what to choose. Now I'm going to try a MikroTik backhaul >>> with >>> a CM9. Currently, I've got two applications: >>> &g
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Ben, A) Will these fit the models that the resellers have in stock now? B) If so, can we order mounts separately? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Marketing" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Tuesday, January 02, 2007 10:32 AM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Hello Tim, When purchasing the grids the next time, select the HDGD58-29 antennas. These come with a new L-Bracket that attaches to the reflector in 4 locations. The L-Bracket is also tapped for easy installation. This can be seen on page 2 of the spec sheet: http://pacwireless.com/products/GD58_Data_Sheet.pdf If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not provided). Drop me your address and we can send you a sample of the L-bracket. Let me know if you have any questions. Regards, Ben Moore Sales Manager Pacific Wireless [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Kerns Sent: Saturday, December 30, 2006 6:48 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipe
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Hello Tim, When purchasing the grids the next time, select the HDGD58-29 antennas. These come with a new L-Bracket that attaches to the reflector in 4 locations. The L-Bracket is also tapped for easy installation. This can be seen on page 2 of the spec sheet: http://pacwireless.com/products/GD58_Data_Sheet.pdf If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts not provided). Drop me your address and we can send you a sample of the L-bracket. Let me know if you have any questions. Regards, Ben Moore Sales Manager Pacific Wireless [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Kerns Sent: Saturday, December 30, 2006 6:48 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion >I do use their dishes where I have a large enough tower, water tower or a > roof. I will tell ya though - - the 29dbi grids are mighty fine, much less > expensive than a solid dish, wind load is no comparison as well as the > ease > of mounting. If you are leasing tower space - - the grid is a no brainer > unless you have to have the extra db that comes with a dish. > > Mac Dearman > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Saturday, December 30, 2006 2:28 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Are we preferring their grids to dishes? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > - Original Message - > From: "Mac Dearman" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Saturday, December 30, 2006 12:18 PM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > >> Mark, >> >> I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, >> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I >> have >> built a wireless network that covers 12% of Louisiana utilizing their >> antennas exclusively for my BH. Well - I do have several of the Trango >> dual >> polarity ext's. >> >> Mac Dearman >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Mark Nash - Lists >> Sent: Saturday, December 30, 2006 1:12 PM >> To: WISPA General List >> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> I have usually used Trango backhauls, so I have not had to worry about 5 >> GHz >> >> antennas and what to choose. Now I'm going to try a MikroTik backhaul >> with >> a CM9. Currently, I've got two applications: >> >> 1. 2-mile link that I can perhaps use 5.3GHz over. >> >> 2. 8-mile link that I'll go 5.8GHz over. >> >> What antennas have you used to accomplish links such as these... >> >> Also, kI have heard that the output power of the CM9 in a MikroTik can be >> adjusted. Experience? >> >> Mark Nash >> Network Engineer >> UnwiredOnline.Net >> 350 Holly Street >> Junction City, OR 97448 >> http://www.uwol.net >> 541-998- >> 541-998-5599 fax >> >> >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Hi, We use either a GPS at each side, or just bearing coordinates and a compass. I have aligned several links at 20+ miles only doing one side and then going to the other side and having a perfect signal. :) And actually the longer the distance the easier it becomes... most 5.8ghz dishes have around a 4 degree beamwidth... which means at 30 miles is a much broader area than at 5 miles, thus easier to get inside that beam. We aligned a 137 mile link (just for testing) within 10 minutes. ;) Travis Microserv chris cooper wrote: Can you share the method you use to link them up so quickly over such a distance? Thanks Chris I have aligned 5.8ghz links up to 73 miles (and even a test link at 137 miles) within 5 minutes start to finish. Is it possible you have another problem? -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Can you share the method you use to link them up so quickly over such a distance? Thanks Chris I have aligned 5.8ghz links up to 73 miles (and even a test link at 137 miles) within 5 minutes start to finish. Is it possible you have another problem? -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
My experience as well.The mount is wayyy to flimsy. Equinox has some much heavier duty mounts which I hope to get my hands on in a week or two. They would fix that flimsy thing right up and make it quite solid. I have seen an example of one that wasn't for the grids, and they are incredibly solid. +++ neofast.net - fast internet for North East Oregon and South East Washington email me at mark at neofast dot net 541-969-8200 Direct commercial inquiries to purchasing at neofast dot net - Original Message - From: "Tim Kerns" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Saturday, December 30, 2006 5:48 PM Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > Mac, > Have PacWireless made any changes to the mount on the 29db grids... I have 4 > in use and the mount isn't very solid. The grid deflects a lot in the wind. > I can watch the signal go up and down as it moves. > Tim Kerns > CV-Access, Inc. > > - Original Message - > From: "Mac Dearman" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Saturday, December 30, 2006 12:53 PM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > >I do use their dishes where I have a large enough tower, water tower or a > > roof. I will tell ya though - - the 29dbi grids are mighty fine, much less > > expensive than a solid dish, wind load is no comparison as well as the > > ease > > of mounting. If you are leasing tower space - - the grid is a no brainer > > unless you have to have the extra db that comes with a dish. > > > > Mac Dearman > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Mark Nash - Lists > > Sent: Saturday, December 30, 2006 2:28 PM > > To: WISPA General List > > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > Are we preferring their grids to dishes? > > > > Mark Nash > > Network Engineer > > UnwiredOnline.Net > > 350 Holly Street > > Junction City, OR 97448 > > http://www.uwol.net > > 541-998- > > 541-998-5599 fax > > - Original Message - > > From: "Mac Dearman" <[EMAIL PROTECTED]> > > To: "'WISPA General List'" > > Sent: Saturday, December 30, 2006 12:18 PM > > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > > > > >> Mark, > >> > >> I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, > >> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I > >> have > >> built a wireless network that covers 12% of Louisiana utilizing their > >> antennas exclusively for my BH. Well - I do have several of the Trango > >> dual > >> polarity ext's. > >> > >> Mac Dearman > >> > >> -Original Message- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Mark Nash - Lists > >> Sent: Saturday, December 30, 2006 1:12 PM > >> To: WISPA General List > >> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion > >> > >> I have usually used Trango backhauls, so I have not had to worry about 5 > >> GHz > >> > >> antennas and what to choose. Now I'm going to try a MikroTik backhaul > >> with > >> a CM9. Currently, I've got two applications: > >> > >> 1. 2-mile link that I can perhaps use 5.3GHz over. > >> > >> 2. 8-mile link that I'll go 5.8GHz over. > >> > >> What antennas have you used to accomplish links such as these... > >> > >> Also, kI have heard that the output power of the CM9 in a MikroTik can be > >> adjusted. Experience? > >> > >> Mark Nash > >> Network Engineer > >> UnwiredOnline.Net > >> 350 Holly Street > >> Junction City, OR 97448 > >> http://www.uwol.net > >> 541-998- > >> 541-998-5599 fax > >> > >> > >> > >> -- > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> -- > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > > > > > > > -- > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -- > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Hi, Having personally aligned many, many 2ft and 3ft dishes at 5.3ghz - 5.8ghz, I can say that I have never actually found a "side lobe" with any of our links. The signal starts low and goes up as we find center, and then slowly drops down on the other side. The only links I have ever actually seen (and incorrectly aligned to) a side lobe was with 38ghz. Are you sure you are seeing a side lobe? I have aligned 5.8ghz links up to 73 miles (and even a test link at 137 miles) within 5 minutes start to finish. Is it possible you have another problem? Travis Microserv Lawrence E. Bakst wrote: 1. Does anyone have any experience with the XtremeWave MPR Series from PCTEL/MaxRad? 2. Can anyone comapre the PacWireless offerings to the XtremeWave MPR Series? I suspect the MPR's are more expensive/ 3. Some of the MPR's have side lobes that make alignment challenging. In this case we are talking about the 24" 5.8 GHz model.Does anyone have an tips or ideas on how to align 24" dishes on 70-100 foot towers. To be honest our installer seems to be having issues getting it right. I actually think we'll get it next time. There are 3 cases: side lobe to side lobe main lobe to side lobe main lobe to main lobe We started out with side lobe to side lobe. In the second attempt we briefly saw what I believe was main lobe to main lobe, but person to person communication problems forced us to settle for main lobe to side lobe, which was 5 dB more RSSI and not the 10 dB we had seen or hoped for. Best, leb At 11:11 AM -0800 12/30/06, Mark Nash - Lists wrote: I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
1. Does anyone have any experience with the XtremeWave MPR Series from PCTEL/MaxRad? 2. Can anyone comapre the PacWireless offerings to the XtremeWave MPR Series? I suspect the MPR's are more expensive/ 3. Some of the MPR's have side lobes that make alignment challenging. In this case we are talking about the 24" 5.8 GHz model.Does anyone have an tips or ideas on how to align 24" dishes on 70-100 foot towers. To be honest our installer seems to be having issues getting it right. I actually think we'll get it next time. There are 3 cases: side lobe to side lobe main lobe to side lobe main lobe to main lobe We started out with side lobe to side lobe. In the second attempt we briefly saw what I believe was main lobe to main lobe, but person to person communication problems forced us to settle for main lobe to side lobe, which was 5 dB more RSSI and not the 10 dB we had seen or hoped for. Best, leb At 11:11 AM -0800 12/30/06, Mark Nash - Lists wrote: >I have usually used Trango backhauls, so I have not had to worry about 5 GHz >antennas and what to choose. Now I'm going to try a MikroTik backhaul with a >CM9. Currently, I've got two applications: > >1. 2-mile link that I can perhaps use 5.3GHz over. > >2. 8-mile link that I'll go 5.8GHz over. > >What antennas have you used to accomplish links such as these... > >Also, kI have heard that the output power of the CM9 in a MikroTik can be >adjusted. Experience? > >Mark Nash >Network Engineer >UnwiredOnline.Net >350 Holly Street >Junction City, OR 97448 >http://www.uwol.net >541-998- >541-998-5599 fax > > >-- >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
The die cast would be stronger... the issue is the mount only makes contact at the 3 screws to the grid, this allows the grid to flex and move in the wind. On a 2.4 feed horn the square tube has a "U" shape clamp that ties the grid and feed horn to the mount making it stronger. I spoke to support @ PacWireless over 18 months ago, I was told they were looking at the mount, but never heard if it was redesigned. I might add that using the grid in the horizontal position, it does not flex as much. Tim Kerns CV-Access, Inc. - Original Message - From: "Scott Reed" <[EMAIL PROTECTED]> To: "WISPA General List" Sent: Saturday, December 30, 2006 6:21 PM Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Is it the mount or the grid itself. I haven't noticed it with the mount, but I know moving the wire grids around they will deflect. Get a couple of the die-cast ones if you don't have any and see if they are better. Tim Kerns wrote: Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Is it the mount or the grid itself. I haven't noticed it with the mount, but I know moving the wire grids around they will deflect. Get a couple of the die-cast ones if you don't have any and see if they are better. Tim Kerns wrote: Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Mac, Have PacWireless made any changes to the mount on the 29db grids... I have 4 in use and the mount isn't very solid. The grid deflects a lot in the wind. I can watch the signal go up and down as it moves. Tim Kerns CV-Access, Inc. - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Nice thing about the wire grids from pac, you can just buy new 5 gig feedhorns. I'm sure there are plenty of grids hanging around. George Mac Dearman wrote: I have several 18 & 20 mile links using the MT RB532/SR5 w/Pacwireless Dish on one side and a 26dbi (was out of 29dbi) with complete success Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 3:07 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks Mac and Travis... This does sound like a no-brainer. How about a 12-mile link with 5.3 or 5.8? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
I have a 13 mi like using MT / CM-9' and 32db dishes, got them from DoubleRadius. I am not sure of the brand. Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
I'm assuming this is 5.8, not 5.3, right? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 1:21 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have several 18 & 20 mile links using the MT RB532/SR5 w/Pacwireless Dish on one side and a 26dbi (was out of 29dbi) with complete success Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 3:07 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks Mac and Travis... This does sound like a no-brainer. How about a 12-mile link with 5.3 or 5.8? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
I have several 18 & 20 mile links using the MT RB532/SR5 w/Pacwireless Dish on one side and a 26dbi (was out of 29dbi) with complete success Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 3:07 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks Mac and Travis... This does sound like a no-brainer. How about a 12-mile link with 5.3 or 5.8? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion >I do use their dishes where I have a large enough tower, water tower or a > roof. I will tell ya though - - the 29dbi grids are mighty fine, much less > expensive than a solid dish, wind load is no comparison as well as the > ease > of mounting. If you are leasing tower space - - the grid is a no brainer > unless you have to have the extra db that comes with a dish. > > Mac Dearman > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Saturday, December 30, 2006 2:28 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Are we preferring their grids to dishes? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > - Original Message - > From: "Mac Dearman" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Saturday, December 30, 2006 12:18 PM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > >> Mark, >> >> I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, >> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I >> have >> built a wireless network that covers 12% of Louisiana utilizing their >> antennas exclusively for my BH. Well - I do have several of the Trango >> dual >> polarity ext's. >> >> Mac Dearman >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Mark Nash - Lists >> Sent: Saturday, December 30, 2006 1:12 PM >> To: WISPA General List >> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> I have usually used Trango backhauls, so I have not had to worry about 5 >> GHz >> >> antennas and what to choose. Now I'm going to try a MikroTik backhaul >> with >> a CM9. Currently, I've got two applications: >> >> 1. 2-mile link that I can perhaps use 5.3GHz over. >> >> 2. 8-mile link that I'll go 5.8GHz over. >> >> What antennas have you used to accomplish links such as these... >> >> Also, kI have heard that the output power of the CM9 in a MikroTik can be >> adjusted. Experience? >> >> Mark Nash >> Network Engineer >> UnwiredOnline.Net >> 350 Holly Street >> Junction City, OR 97448 >> http://www.uwol.net >> 541-998- >> 541-998-5599 fax >> >> >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
You can use 5.3 with 28db dishes and your tx set to 3 - 4 db power, that would give you a expected rsss of -75, good if the area is clean of noise. Or do 5.8 full power and expect a -63 using cm9 cards Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 5:07 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Thanks Mac and Travis... This does sound like a no-brainer. How about a 12-mile link with 5.3 or 5.8? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion >I do use their dishes where I have a large enough tower, water tower or a > roof. I will tell ya though - - the 29dbi grids are mighty fine, much less > expensive than a solid dish, wind load is no comparison as well as the > ease > of mounting. If you are leasing tower space - - the grid is a no brainer > unless you have to have the extra db that comes with a dish. > > Mac Dearman > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Saturday, December 30, 2006 2:28 PM > To: WISPA General List > Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > Are we preferring their grids to dishes? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > - Original Message - > From: "Mac Dearman" <[EMAIL PROTECTED]> > To: "'WISPA General List'" > Sent: Saturday, December 30, 2006 12:18 PM > Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > >> Mark, >> >> I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, >> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I >> have >> built a wireless network that covers 12% of Louisiana utilizing their >> antennas exclusively for my BH. Well - I do have several of the Trango >> dual >> polarity ext's. >> >> Mac Dearman >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Mark Nash - Lists >> Sent: Saturday, December 30, 2006 1:12 PM >> To: WISPA General List >> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion >> >> I have usually used Trango backhauls, so I have not had to worry about 5 >> GHz >> >> antennas and what to choose. Now I'm going to try a MikroTik backhaul >> with >> a CM9. Currently, I've got two applications: >> >> 1. 2-mile link that I can perhaps use 5.3GHz over. >> >> 2. 8-mile link that I'll go 5.8GHz over. >> >> What antennas have you used to accomplish links such as these... >> >> Also, kI have heard that the output power of the CM9 in a MikroTik can be >> adjusted. Experience? >> >> Mark Nash >> Network Engineer >> UnwiredOnline.Net >> 350 Holly Street >> Junction City, OR 97448 >> http://www.uwol.net >> 541-998- >> 541-998-5599 fax >> >> >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Thanks Mac and Travis... This does sound like a no-brainer. How about a 12-mile link with 5.3 or 5.8? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:53 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
I do use their dishes where I have a large enough tower, water tower or a roof. I will tell ya though - - the 29dbi grids are mighty fine, much less expensive than a solid dish, wind load is no comparison as well as the ease of mounting. If you are leasing tower space - - the grid is a no brainer unless you have to have the extra db that comes with a dish. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 2:28 PM To: WISPA General List Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion > Mark, > > I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, > MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have > built a wireless network that covers 12% of Louisiana utilizing their > antennas exclusively for my BH. Well - I do have several of the Trango > dual > polarity ext's. > > Mac Dearman > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Mark Nash - Lists > Sent: Saturday, December 30, 2006 1:12 PM > To: WISPA General List > Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion > > I have usually used Trango backhauls, so I have not had to worry about 5 > GHz > > antennas and what to choose. Now I'm going to try a MikroTik backhaul > with > a CM9. Currently, I've got two applications: > > 1. 2-mile link that I can perhaps use 5.3GHz over. > > 2. 8-mile link that I'll go 5.8GHz over. > > What antennas have you used to accomplish links such as these... > > Also, kI have heard that the output power of the CM9 in a MikroTik can be > adjusted. Experience? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998- > 541-998-5599 fax > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Are we preferring their grids to dishes? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax - Original Message - From: "Mac Dearman" <[EMAIL PROTECTED]> To: "'WISPA General List'" Sent: Saturday, December 30, 2006 12:18 PM Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
Mark, I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi grids, MT & CM9's. IMHO you can't go wrong using the PacWireless antennas. I have built a wireless network that covers 12% of Louisiana utilizing their antennas exclusively for my BH. Well - I do have several of the Trango dual polarity ext's. Mac Dearman -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Nash - Lists Sent: Saturday, December 30, 2006 1:12 PM To: WISPA General List Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
The PacWireless dishes, panels and grids (depending on the gain you need, mounting, etc.) all work well. Also, you don't need to adjust the power settings in the MT... just leave it default, it works better. Travis Microserv Mark Nash - Lists wrote: I have usually used Trango backhauls, so I have not had to worry about 5 GHz antennas and what to choose. Now I'm going to try a MikroTik backhaul with a CM9. Currently, I've got two applications: 1. 2-mile link that I can perhaps use 5.3GHz over. 2. 8-mile link that I'll go 5.8GHz over. What antennas have you used to accomplish links such as these... Also, kI have heard that the output power of the CM9 in a MikroTik can be adjusted. Experience? Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998- 541-998-5599 fax -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
