un...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, April 28, 2010 11:58 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From:w
into only MT cards?
>>>
>>> Bob-
>>>
>>>
>>> -Original Message-----
>>> From:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>>> Behalf Of Robert West
>>> Sent: Wednesday, April 28, 2010 11
.
I'd set the noise floor to a -75 or -80 too.
marlon
- Original Message -
From: "Akinlolu Ajayi-Obe"
To:
Sent: Tuesday, April 27, 2010 11:23 PM
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance
uot;
> Sent: Thursday, April 29, 2010 1:04 AM
> Subject: Re: [WISPA] MT PtP
>
>
> Noted. Thanks, Rick!
>
> You da man!
>
>
> - Original Message -
> From: "RickG"
> To: "WISPA General List"
> Sent: Thursday, April 29, 2010 12:1
Rick, I love ya. If you were a woman I'd divorce ya though.
- Original Message -
From: "Robert West"
To: "WISPA General List"
Sent: Thursday, April 29, 2010 1:04 AM
Subject: Re: [WISPA] MT PtP
Noted. Thanks, Rick!
You da man!
- Original Message
Noted. Thanks, Rick!
You da man!
- Original Message -
From: "RickG"
To: "WISPA General List"
Sent: Thursday, April 29, 2010 12:11 AM
Subject: Re: [WISPA] MT PtP
That helps with the frustration! I recommend a 5 pound sledge :)
On Thu, Apr 29, 2010 at 12:01 AM
neral List
Subject: Re: [WISPA] MT PtP
Works good for me.
Robert West wrote:
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wedn
day, April 28, 2010 3:30 PM
> Subject: Re: [WISPA] MT PtP
>
>
> For ufl use hot glue. Works wonders. Little dab around the connector
> and another to attach the coax to the minipci board for leverage.
>
> On 4/28/10, Robert West wrote:
>> Oh, no, not the MMCX! That stupid U
I use a hammer. works well.
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Wednesday, April 28, 2010 3:30 PM
Subject: Re: [WISPA] MT PtP
For ufl use hot glue. Works wonders. Little dab around the connector
and another to attach the
sage -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Wednesday, April 28, 2010 3:30 PM
Subject: Re: [WISPA] MT PtP
For ufl use hot glue. Works wonders. Little dab around the connector
and another to attach the coax to the minipci board for leverage.
On 4/28/10, Robe
] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 3:30 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Some people say there is 1db or 2db loss on the pigtail due to the MMCX
connector. This is not the MMCX connectors fault but it is due to the
connector being a &q
rd the MMCX MT. Crazy premium for
> good connectors.
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Josh Luthman
> Sent: Wednesday, April 28, 2010 3:00 PM
> To: WISPA General List
> Subject: Re: [WI
al Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, April 28, 2010 3:09 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Oh, no, not the MMCX! That stupid U.fl crap. Love the MMCX.
All my MT cards are u.
esday, April 28, 2010 3:00 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Mmcx connector popped off???
On 4/28/10, Robert West wrote:
> I've had two burn out from the connector popping off for whatever reason.
I
> learned to tape them on after that. But even with that, I finally p
...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Bret Clark
Sent: Wednesday, April 28, 2010 3:02 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
What is the general or best case throughput on these radios in PTP
configuration (speed/distance)? I googled for it, but saw a lot of very
old
Go figure.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, April 28, 2010 3:00 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Mmcx connector popped off???
On 4/28/10, Robert West wrote:
> I
-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Josh Luthman
> Sent: Wednesday, April 28, 2010 10:30 AM
> To: WISPA General List
> Subject: Re: [WISPA] MT PtP
>
> Have you used the r5h? The r52n is very disappointing.
>
> O
ay, April 28, 2010 2:29 PM
> To: 'WISPA General List'
> Subject: Re: [WISPA] MT PtP
>
> Yes I have used the R5H and LOVE IT. Very nice card and a good price. I
> think it performs better than the XR5. However some people say that the card
> burns up easily but I run the
n see
everything with them.
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 2:29 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Yes I have used the R5H and LOVE IT.
f
Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 2:25 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
How much throughput are you getting on the 900mhz with N-stream? 10mhz and
5mhz channels?
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
w
sday, April 28, 2010 10:30 AM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Have you used the r5h? The r52n is very disappointing.
On 4/28/10, Kurt Fankhauser wrote:
> What 350mw card are you using? I wouldn't use anything less than XR5 or
R5H
> because their receive sensitivity i
: Wednesday, April 28, 2010 1:08 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
Works good for me.
Robert West wrote:
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun
@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, April 28, 2010 11:58 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wirele
...@as-technologies.com; 'WISPA General List'
Subject: Re: [WISPA] MT PtP
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H
because their receive sensitivity is so much better. Plus you will use MMCX
connectors with these two cards which is going to sa
Yep, you're right. Wasn't aware of using on single card. Thanks!
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Wednesday, April 28, 2010 12:22 PM
To: WISPA General List
Subject: Re: [WISPA] MT Pt
iFi Wireless Internet Service
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Robert West
Sent: Wednesday, April 28, 2010 12:11 PM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
With one radio. So if using one radio,
eless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Wednesday, April 28, 2010 12:04 PM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
I run all my rb411/XR9 setups with nstream. Seams to keep em nice and
steady.
Steve Barnes
Manager
PCS-WIN
RC-WiFi Wireless Intern
bert West
> Sent: Wednesday, April 28, 2010 11:58 AM
> To: 'WISPA General List'
> Subject: Re: [WISPA] MT PtP
>
> What about N-stream with 900Mhz? Is that just asking for trouble?
>
> Bob-
>
>
>
> -Original Message-
> From: wireless-boun...@
11:59 AM
To: 'WISPA General List'
Subject: Re: [WISPA] MT PtP
Wait, N-Stream will work with non-mikrotik cards? I thought it was locked
into only MT cards?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert
7;
Subject: Re: [WISPA] MT PtP
What about N-stream with 900Mhz? Is that just asking for trouble?
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Kurt Fankhauser
Sent: Wednesday, April 28, 2010 10:23 AM
To: aajayi...@as-techno
List'
Subject: Re: [WISPA] MT PtP
What 350mw card are you using? I wouldn't use anything less than XR5 or R5H
because their receive sensitivity is so much better. Plus you will use MMCX
connectors with these two cards which is going to save you a lot of
headaches over u.fl. Also defin
Randy Cosby
Sent: Wednesday, April 28, 2010 10:39 AM
To: WISPA General List
Subject: Re: [WISPA] MT PtP
FWIW I've been very pleased with the R52HN.
On 4/28/2010 8:30 AM, Josh Luthman wrote:
> Have you used the r5h? The r52n is very disappointing.
>
> On 4/28/10, Kurt Fan
>>>
>>>
>>> -----Original Message-
>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>>> Behalf Of Akinlolu Ajayi-Obe
>>> Sent: Wednesday, April 28, 2010 2:23 AM
>>> To: wireless@wispa.org
>>>
t; www.wavelinc.com
>>
>>
>>
>> -Original Message-
>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>> Behalf Of Akinlolu Ajayi-Obe
>> Sent: Wednesday, April 28, 2010 2:23 AM
>> To: wireless@wispa.org
>> Subjec
olu Ajayi-Obe
> Sent: Wednesday, April 28, 2010 2:23 AM
> To: wireless@wispa.org
> Subject: [WISPA] MT PtP
>
> I want to setup an MT point to point using two MT 411 boards, 350mw cards
> and a 23db rootena. Distance is 7km. Is there anything I need to tweak or
> watch out for? New to
--Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Akinlolu Ajayi-Obe
Sent: Wednesday, April 28, 2010 2:23 AM
To: wireless@wispa.org
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena
Reply-To: , WISPA General List
Date: Wed, 28 Apr 2010 06:23:28 +
To:
Subject: [WISPA] MT PtP
I want to setup an MT point to point using two MT 411 boards, 350mw cards
and a 23db rootena. Distance is 7km. Is there anything I need to tweak or
watch out for? New to MT. I have setup a basic link and
I want to setup an MT point to point using two MT 411 boards, 350mw cards and
a 23db rootena. Distance is 7km. Is there anything I need to tweak or watch out
for? New to MT. I have setup a basic link and tested in the office.
Thanks
Akin
Sent from my BlackBerry® smartphone
---
38 matches
Mail list logo