Re: [WISPA] 48 volt power supplies
Thanks to all for your feedback in helping me to ramp up my backhaul. I learned some very valuable stuff here from the collective...as usual. I sure do appreciate those few people who pay their WISPA dues and actually maintain this organization so we all have resources like this :-) Scriv Bob Moldashel wrote: Blair, OKI went back and re-read my post. And now I see why you are a little "sharp" in your reply. My appologies. It was the way it can be read, not the way it was meant to be said. I was not looking to "correct" you. I was just trying to point out that the units did not appear to be in stock and that the current draw for the units is slightly under one amp. As such, any old 48 vdc POE won't work. It must be with enough current to support it as I'm sure you know. While John may know enough to look for what's needed, it is the "lurker" that may just buy them without knowing that i am trying to inform. And as for anyone being offended or misled..the heck with them! :-) Again, my appologies. It was not meant to be that way. Regards, -B- Blair Davis wrote: Bev's web stock levels are often wrong. I place my orders with her by phone. The intent of the post was to provide a supplier that I knew and that also carried what John was looking for. The current was not mentioned. Wisp-Router carries several different 48V supplies with different current ratings. I would assume that John would pick the unit he needs to do the job. To anyone who was offended or misled by my providing a link to a supplier who was temporally out of stock, I apologize. Bob Moldashel wrote: Blair Davis wrote: Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv Eje has no stock of 48 vdc anything unfortunately. You also need to look at the current draw. john will need a 48 vdc supply to run the radios also. Might as well get something that will do the job right. -B- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
Blair, OKI went back and re-read my post. And now I see why you are a little "sharp" in your reply. My appologies. It was the way it can be read, not the way it was meant to be said. I was not looking to "correct" you. I was just trying to point out that the units did not appear to be in stock and that the current draw for the units is slightly under one amp. As such, any old 48 vdc POE won't work. It must be with enough current to support it as I'm sure you know. While John may know enough to look for what's needed, it is the "lurker" that may just buy them without knowing that i am trying to inform. And as for anyone being offended or misled..the heck with them! :-) Again, my appologies. It was not meant to be that way. Regards, -B- Blair Davis wrote: Bev's web stock levels are often wrong. I place my orders with her by phone. The intent of the post was to provide a supplier that I knew and that also carried what John was looking for. The current was not mentioned. Wisp-Router carries several different 48V supplies with different current ratings. I would assume that John would pick the unit he needs to do the job. To anyone who was offended or misled by my providing a link to a supplier who was temporally out of stock, I apologize. Bob Moldashel wrote: Blair Davis wrote: Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv Eje has no stock of 48 vdc anything unfortunately. You also need to look at the current draw. john will need a 48 vdc supply to run the radios also. Might as well get something that will do the job right. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US & Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
ah, strap a couple of 24 volt batteries on with some chargers.. :-) ps: we do that for backup - less expensive than a UPS. We run Redline equipment - relatively high current - for 4 days w/o electricity. works great. be sure to get a charger that resets properly after the A/C kicks out - we learned that lesson on the 5th day of the first outage :-) Kurt Fankhauser wrote: RFlinx has 48v POE supplies 60watts. www.rflinx.com Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Scrivner Sent: Wednesday, December 21, 2005 6:37 PM To: wireless@wispa.org Subject: [WISPA] 48 volt power supplies Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 48 volt power supplies
RFlinx has 48v POE supplies 60watts. www.rflinx.com Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Scrivner Sent: Wednesday, December 21, 2005 6:37 PM To: wireless@wispa.org Subject: [WISPA] 48 volt power supplies Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.371 / Virus Database: 267.14.3/209 - Release Date: 12/21/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
Bev's web stock levels are often wrong. I place my orders with her by phone. The intent of the post was to provide a supplier that I knew and that also carried what John was looking for. The current was not mentioned. Wisp-Router carries several different 48V supplies with different current ratings. I would assume that John would pick the unit he needs to do the job. To anyone who was offended or misled by my providing a link to a supplier who was temporally out of stock, I apologize. Bob Moldashel wrote: Blair Davis wrote: Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv Eje has no stock of 48 vdc anything unfortunately. You also need to look at the current draw. john will need a 48 vdc supply to run the radios also. Might as well get something that will do the job right. -B- -- Blair Davis AOL IM Screen Name -- Theory240 West Michigan Wireless ISP 269-686-8648 A division of: Camp Communication Services, INC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
Blair Davis wrote: Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv Eje has no stock of 48 vdc anything unfortunately. You also need to look at the current draw. john will need a 48 vdc supply to run the radios also. Might as well get something that will do the job right. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US & Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
http://www.jameco.com/webapp/wcs/stores/servlet/StoreCatalogDisplay?storeId=10001&catalogId=10001&langId=-1 These guys carry a lot of stuff. I've ordered from them. All the items showed up. Blair Davis wrote: Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv -- Brian Rohrbacher Reliable Internet, LLC www.reliableinter.net Cell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
Try http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26 Blair John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv John, Get these: http://tessco.com/products/displayProductInfo.do?sku=50827&eventGroup=4&eventPage=1 Both the radio and the DS3 converters work off 48 vdc if Ii remember correctly. You will kill 2 birds with one stone here I can't help you with the manuals though... Sorry. -B- -- Bob Moldashel Lakeland Communications, Inc. Broadband Deployment Group 1350 Lincoln Avenue Holbrook, New York 11741 USA 800-479-9195 Toll Free US & Canada 631-585-5558 Fax 516-551-1131 Cell -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 48 volt power supplies
The radios that Demarc and Deliberant sell (the b/g zinwell boards) use 48v power supplies. Call Tony at Demarc or Caleb at Deliberant. I bet either would sell you some. How many amp you need? How many power supplies do you need. I might have a few extra. (if they are a fit) Brian John Scrivner wrote: Can anyone hook me up with a source for the 48 volt supplies? I need to buy some of those DS3 to Ethernet converters and they require that supply. I have never seen them before and need a source. Also, does anyone have a manual and/or drawings of the PCOM radios we are buying? I need to start reading up on these radios to make sure I know what all I need to get them installed. Please help if you have a source of information on them. If any of you have experience with the PCOMs and DS3 to Ethernet converters I would like to pick your brain on a few things. Many thanks, Scriv -- Brian Rohrbacher Reliable Internet, LLC www.reliableinter.net Cell 269-838-8338 "Caught up in the Air" 1 Thess. 4:17 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/