Has anyone had any experience with the Mushroom Truffle BBNA Router?
http://www.mushroomnetworks.com/product.aspx?product_id=1000
WISPA Wants You! Join today!
http://signup.wispa.org/
Has anyone had problems with the new Firmware TR6-5.0.2Rt?
If so what and what is the fix?
WISPA Wants You! Join today!
http://signup.wispa.org/
I upgraded 50 TR-902 client and 2 AP's now they are erratic, and have to be
reboot from the client side. Also I am having problem accessing some clients
via the web. The AP have to be rebooted at their location.
NGL
--
From: D. Ryan Spott rsp
, December 01, 2009 3:27 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Tranzeo TR-902 Firmware
Noise?
Any stats?
I have 30 or so updated and no issues so far.
ryan
On Tue, Dec 1, 2009 at 3:20 PM, NGL n...@ngl.net wrote:
I upgraded 50 TR-902 client and 2 AP's now
I also would be interested in the alarm information.
Thanx
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Monday, January 18, 2010 9:03 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] stolen solar site
Be sure
What wrong with you kids? I am 75 and still doing installs. Just have to be
careful. Same thing when you 20.
NGL
--
From: Patrick Leary ple...@apertonet.com
Sent: Thursday, March 05, 2009 8:12 AM
To: joe.mil...@dslbyair.com; WISPA General List
I need a 12 volt router to install at a tower location that runs on solar +
batteries. What router has the least wattage requirement and what it it.
WISPA Wants You! Join today!
http://signup.wispa.org/
Is malicious damage to a tower a federal offense if I have government agencies
using my service to send and receive email and data?
Thanx
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
flag.gif
Is malicious damage to a tower a federal offense if I have government
agencies using my service to send and receive email and data?
Thanx
NGL
WISPA Wants You! Join today!
http://signup.wispa.org
I am talking about physical damage i.e.: stolen components, broken solar
panels etc. Not use of the system.
Thanx
NGL
--
From: Brian Webster bwebs...@wirelessmapping.com
Sent: Monday, March 30, 2009 9:10 AM
To: WISPA General List wireless@wispa.org
I need a means to monitor a 24 volt battery system in a remote area. I can
open and close relays via cell phone. It can be digital or through a tone
generator or second best would be IP.
Any suggestions?
Thanx
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier
this and you have a remote network sniffer to
boot ;)
Scott Carullo
Brevard Wireless
321-205-1100 x102
Original Message
From: NGL n...@ngl.net
Sent: Tuesday, April 21, 2009 11:00 AM
To: wireless@wispa.org wireless@wispa.org
Subject: [WISPA] Monitor a 24 volt battery
I need
Anyone have service in area code 95476. I have a customer lead for you.
Thanx
NGL
n...@ngl.net
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
WISPA Wants You! Join today!
http
Should read zip code :)
Brain dead
NGL
--
From: NGL n...@ngl.net
Sent: Sunday, May 10, 2009 1:49 PM
To: WISPA General List wireless@wispa.org
Subject: [WISPA] Wireless Service in 95476
Anyone have service in area code 95476. I have a customer
What is the general opinion of the NetEqualizer NE2000?
Pros
Cons
What manufacture do you prefer?
Thanx
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
WISPA Wants You! Join today
Where can I get information on the Forrests SiteMonitors or similar
products?
Thanx
NGL
--
From: Kevin Neal ke...@safelink.net
Sent: Tuesday, June 16, 2009 2:16 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] UPS RFP
Have
Does anyone have a copy of the manual for a Packeteer 4000, I sure could use
one. If there is one one the net please let me know.
Thanx
NGL
WISPA Wants You! Join today!
http://signup.wispa.org
My last post should have read,
Does anyone have a copy of the manual for a Packeteer 4500 (not 4000) , I sure
could use one. If there is one one the net please let me know.
Thanx
NGL
WISPA Wants You! Join today
Which model Trendnet?
Thanx
From: Steve Barnes
Sent: Monday, July 12, 2010 6:21 AM
To: WISPA General List
Subject: Re: [WISPA] Autoreply: Wireless Digest, Vol 31, Issue 10
We have had very little issues with Trendnet. $24 Sell for $45. Easy money.
Guys keep 5 in the trucks at all
What ratio of bandwidth per 100 customers is being used to deliver 2M down and
1M up?
WISPA Wants You! Join today!
http://signup.wispa.org/
How much bandwidth do you purchase per 100 customers to deliver 2M down and 1M
up?
From: ~NGL~
Sent: Saturday, July 31, 2010 7:37 AM
To: WISPA General List
Subject: [WISPA] Bandwidth Ratio to Customers
What ratio of bandwidth per 100 customers is being used to deliver 2M down
Anyone having problems related to solar flares that have reported on the
news?
Are there any expected?
Thanx
WISPA Wants You! Join today!
http://signup.wispa.org/
I need to add a second AP on a tower and need help.
How far apart must the 90 degree sector antenna be placed?
Can they be the same polarity?
Can I run LMR-400 to them about 70ft?
Anything else I should consider?
Thanx
NGL
and this could break us
NGL
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.org
Subscribe
All clients
Changed channels several times
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Wednesday, August 18, 2010 8:11 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
Changed frequencies?
Are all
Quarter 5 MHZ
908/5 MHZ
--
From: Leon D. Zetekoff wa4...@arrl.net
Sent: Wednesday, August 18, 2010 8:39 AM
To: wireless@wispa.org
Subject: Re: [WISPA] Major Disaster
On 8/18/2010 11:31 AM, ~NGL~ wrote:
All clients
Changed channels several times
://www.mtin.net/blog - xISP News
http://www.twitter.com/j2sw - Follow me on Twitter
Wisp Consulting - Tower Climbing - Network Support
--
From: ~NGL~ n...@ngl.net
Reply-To: WISPA General List wireless@wispa.org
Date
, or hardware issues.
--
Justin Wilson j...@mtin.net
http://www.mtin.net/blog - xISP News
http://www.twitter.com/j2sw - Follow me on Twitter
Wisp Consulting - Tower Climbing - Network Support
--
From: ~NGL~ n
customer radios.
Change secondary SSID on the CPE to something different from your APs
SSID.
Change your AP SSID to match this new one.
Do this a few times until you find the problem client(s).
50 clients is A LOT for a TR902F.
ryan
On Wed, Aug 18, 2010 at 8:05 AM, ~NGL~ n...@ngl.net
If I replace the 180 degree antenna and replace it with 3 tr-902 -11 what
spacing do I need between them?
NGL
--
From: ~NGL~ n...@ngl.net
Sent: Wednesday, August 18, 2010 12:02 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Major
Anyone have experience with a wind farm coming into their area. They are
planning on 29 wind turbines about 8 miles from my tower. Should I panic and
raise objections or what.
Thanx
NGL
WISPA Wants You! Join
Do you charge when you have to relocate and rewire the equipment at a
clients location, because the trees have grown to a point where the signal
is very weak? If so at what rate?
NGL
--
From: Chris Gotstein ch...@uplogon.com
Sent: Monday
45373
On Mon, Sep 20, 2010 at 4:57 PM, Marco Coelhocoelh...@gmail.com wrote:
If it's tree growth, no. That means we messed up during install.
If the customers moves to a new house, we recharge the installation fee.
Marco
On Mon, Sep 20, 2010 at 3:52 PM, ~NGL~n...@ngl.net wrote:
Do
Anyone having a problem flashing Open-Mesh on a Engenius 1650 using XP Pro.
It seems when I flash a unit the flash completes, but the unit does not
work.
When used as an AP the power and the lan lights are on but when I log in to
it via wireless laptop the IP address is 169.xxx.xxx.xxx.
I have a
test
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
What Dual Wan Routers do you recommend. I now use the Hotbrick LB2, but I is
now requiring rebooting too often.
Thanx
NGL
WISPA Wants You! Join today!
http://signup.wispa.org
Exactly what model do you use?
Thanx
NGL
--
From: Marlon K. Schafer o...@odessaoffice.com
Sent: Thursday, April 01, 2010 6:35 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] What Dual Lan Router
I've moved to the MT 5 port units
Is it the same as the TR 902 Series?
NGL
--
From: Kosinet Wireless wirel...@kosinet.com
Sent: Thursday, April 01, 2010 8:23 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Speaking of Tranzeo..
Tried the Hotfix firmware 4.0.5
Does anyone know how to setup a PacketShaper Software Version 6.1.1
If so contact me at n...@ngl.net.
NGL
WISPA Wants You! Join today!
http://signup.wispa.org
I run up a 3 foot helium balloon and use a pair of binoculars.
Works every time.
NGL
From: Data Technology
Sent: Tuesday, October 19, 2010 9:06 AM
To: WISPA General List
Subject: Re: [WISPA] PtP Dish Alignment
I just did a ptp install of 5g 2ft rocket dishs at 6.47 miles and could
-902 into a mikrotik.
ryan
On Wed, Nov 3, 2010 at 2:50 PM, ~NGL~ n...@ngl.net wrote:
Is there anyway to change from a TR-902 AP to something else, and use the
existing TR-902 Clients?
Thanx
NGL
flag.gif If you can read this Thank A Teacher
I know nothing regarding MT RB or Gz901. When you set these up did you use
any Tranzeo firmware. I have reboot my TR-902 AP's a couple times a day, its
getting to be a pain.
What is the cost of these?
NGL
--
From: Chris Gotstein ch...@uplogon.com
What do I look for a GZ-901 or a GZ-902, I am confused.
NGL
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, November 03, 2010 5:21 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Change AP
The GZ902 is the expensive
Has anyone used a FLR9G30 sold by XAGYL Communications as an AP to Tranzeo
TR-902 Clients?
Thanx
NGL
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, November 03, 2010 9:04 PM
To: wireless@wispa.org
Subject: Re: [WISPA] Change AP
Sorry
I do not know anything regarding Routerboards, if I use a RB493AH which has
3 mini-pci slots, can I install 3 GZ-902 cards and have 3 900mhz AP's in 1
box?
NGL
--
From: ~NGL~ n...@ngl.net
Sent: Thursday, November 04, 2010 10:07 AM
To: WISPA
are not on 5.0.5, try going backwards in
firmware and see what happens.
-- Original Message --
From: ~NGL~ n...@ngl.net
Reply-To: WISPA General List wireless@wispa.org
Date: Tue, 9 Nov 2010 08:05:44 -0800
If you move the AP to Mikrotic are you retaining the TR-902 as CPE's?
If so exactly what Mikrotic are you using.
Thanx
NGL
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, November 10, 2010 9:38 AM
To: wireless@wispa.org
Subject: Re
What throughput are you getting?
Can this setup handle 20 - 30 subs?
Thanx
NGL
--
From: Chris Gotstein ch...@uplogon.com
Sent: Wednesday, November 10, 2010 9:38 AM
To: wireless@wispa.org
Subject: Re: [WISPA] rebooting Tranzeo TR-902
I have seen
Do you mean the AP? It still works with 7 clients now.
NGL
From: RickG
Sent: Friday, November 19, 2010 8:12 PM
To: WISPA General List
Subject: Re: [WISPA] Dropping Clients
swap the suspect unit out with a known working unit.
On Fri, Nov 19, 2010 at 9:29 PM, ~NGL~ n...@ngl.net
All the clients came back on line about 10 pm last night. and are still on line
this morning.
I don't get it!
The AP is a TR-902 11f which has an internal antenna.
The clients that were were dropped were a mix of nearest and furthest from the
AP.
Thanx
NGL
From: Phil Curnutt
Sent: Saturday
switching channels with another AP on that tower .
NGL
From: Bret Clark
Sent: Saturday, November 20, 2010 9:14 AM
To: wireless@wispa.org
Subject: Re: [WISPA] Dropping Clients
Did it rain recently? We had a similar problem where the antenna was not
sealed tight and everytime it rained
Your partially right Tower is only 65 foot, but difficult to get to in good
weather using a quad, and it has been raining all day. No one want to climb a
tower in the rain. I have changed channel and it seems to be stable. I hope!
NGL
Sent: Saturday, November 20, 2010 4:43 PM
To: WISPA
Been up 23 hours since I changed channels, no dropped clients or other problems.
Keeping my fingers crossed.
NGL
From: RickG
Sent: Saturday, November 20, 2010 8:35 PM
To: WISPA General List
Subject: Re: [WISPA] Dropping Clients
I understand that. I hope the frequency change helps
Spoke to soon, starting to drop clients.
From: ~NGL~
Sent: Sunday, November 21, 2010 4:28 PM
To: WISPA General List
Subject: Re: [WISPA] Dropping Clients
Been up 23 hours since I changed channels, no dropped clients or other
problems.
Keeping my fingers crossed.
NGL
From
Rained yesterday, bright and sunny today.
From: Jerry Richardson
Sent: Sunday, November 21, 2010 5:05 PM
To: WISPA General List
Subject: Re: [WISPA] Dropping Clients
Getting any weather or wind?
Jerry Richardson
Sent Mobile
On Nov 21, 2010, at 4:54 PM, ~NGL~ n...@ngl.net
This last time I dropped a total of 5 clients, at about 5 - 15 minutes
intervals. Then in about 1 hour they suddenly appeared.
I still don't get it.
NGL
From: ~NGL~
Sent: Sunday, November 21, 2010 5:35 PM
To: WISPA General List
Subject: Re: [WISPA] Dropping Clients
Rained yesterday
I just used Active@ Partition Recovery on a system where the partition was
deleted. Worked like a champ. They have a free demo to try first it shows the
lost files, but you can't restore them until you purchase it.
NGL
From: Marlon K. Schafer
Sent: Friday, December 03, 2010 9:33 AM
I WAS 42
From: Mike Bushard Jr
Sent: Wednesday, January 26, 2011 9:55 AM
To: WISPA General List
Subject: Re: [WISPA] WISPA DUES -
I was 21.
On Wed, Jan 26, 2011 at 11:48 AM, Blake Covarrubias bl...@beamspeed.com
wrote:
On Jan 26, 2011, at 8:15 AM, Josh Luthman wrote:
YOU CAN HAVE IT, WE SCREWED IT UP
From: Kurt Fankhauser
Sent: Wednesday, January 26, 2011 9:55 AM
To: 'WISPA General List'
Subject: Re: [WISPA] WISPA DUES -
Lets all unite and take over the world!
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
We use Tranzeo TR-902's in hills all the time, and have good luck.
I use this unit to reboot my Ap's on the towers, it is controlled with a
pager.
http://www.wesellpagers.com/wireless_switch.htm
Bob Rothstein
Prime Access
(877) 333-1003
Works flawless
NGL
Where is the login page?
NGL
From: Jim Patient
Sent: Thursday, October 06, 2011 9:03 AM
To: WISPA General List
Subject: Re: [WISPA] New site refresh issue
The how to video is online.
http://www.youtube.com/watch?v=QmcMaC8Rw_Q
Jim Patient
Link Technologies, Inc
What are the Green and Red ? I have never seen them.
NGL
--
From: Patrick D. Nix, Jr pni...@cnetworksolutions.com
Sent: Wednesday, October 19, 2011 9:01 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Aircontrol for UBNT
:) right
Is that the status column? Mine are just grey, How do I change it?
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Wednesday, October 19, 2011 9:50 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Aircontrol for UBNT
That did it, now I have red and green
Thanx
NGL
--
From: Josh Luthman j...@imaginenetworksllc.com
Sent: Wednesday, October 19, 2011 9:50 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Aircontrol for UBNT
Green is connected
900 = Tranzeo TR 902
2.4 = Bullet2 HP
NGL
From: Josh Luthman
Sent: Friday, August 03, 2012 9:02 AM
To: WISPA General List
Subject: Re: [WISPA] 900 AP's and 2.4 AP's
Canopy? Next to none.
Ubiquiti? Watch out - 900 is downconvertered 2.4 =(
Josh Luthman
Office: 937-552-2340
What I have is 7 AP's on a tower. I need to connect tnem a togeather as you
would using a switch. Each AP has its own POE and power.
NGL
From: Josh Luthman
Sent: Saturday, August 11, 2012 4:41 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
Could you use a toughswitch
My main concern is power usage as these towers are all solar. That is why I do
not just use a 12 Volt switch with a 24 - 12 transformer
NGL
From: tfad...@coastinet.com
Sent: Saturday, August 11, 2012 5:00 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
I use
Switch powered by 24 volt DC that is the only power available.
NGL
From: Josh Luthman
Sent: Saturday, August 11, 2012 5:21 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
Wait do you need a switch powered by 24v or spits out 24v?
Cisco uses a lot of power. Mikrotiks
This appears to be AC powered
From: Phil Curnutt
Sent: Saturday, August 11, 2012 5:16 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
Cisco Catalyst 2955C. 12 port, 24 VDC power.
Phil
On Sat, Aug 11, 2012 at 5:47 PM, ~NGL~ n...@ngl.net wrote:
What I have
What wattage at 24 Volt do they use?
NGL
From: Daniel White
Sent: Saturday, August 11, 2012 4:53 PM
To: 'WISPA General List'
Subject: Re: [WISPA] 24 volt switch
Most Cisco switches come with a DC option.
Almost any industrial switch brand (Moxa and EtherWAN for instance
.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Aug 16, 2012 at 3:09 PM, ~NGL~ n...@ngl.net wrote:
We just had a 8000 acre fire go through our area. Called the Wye Fire. In
fact it is only 75% contained at this time. I
I would like to send it out to all clients, to be seen on their monitor.
NGL
From: Steve Barnes
Sent: Thursday, August 16, 2012 12:15 PM
To: WISPA General List
Subject: Re: [WISPA] Emergency Broadcast
What do you mean by emergency broadcast? Free service to any customer for a
while
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of ~NGL~
Sent: Thursday, August 16, 2012 2:09 PM
To: WISPA General List
Subject: [WISPA] Emergency Broadcast
We just had a 8000 acre fire go through our area. Called the Wye Fire. In
fact it is only
I saw this statement in regards to the Bullet2 HP
NGL
From: Greg Ihnen
Sent: Saturday, September 15, 2012 4:10 PM
To: WISPA General List
Subject: Re: [WISPA] Zero-Variable Wireless Infrastructure Deployment
I think they mean no variables pertaining to pigtail cables, loose miniPCI
Thanx
NGL
From: Josh Luthman
Sent: Wednesday, October 10, 2012 11:45 AM
To: WISPA General List
Subject: Re: [WISPA] Test
pong
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Oct 10, 2012 at 2:40 PM, ~NGL~ n
They are mounted to the antenna with a 2 foot cable then fastened to mast the
cat5 has a 6 inch loop.
It is hard to believe I am the only one with this problem.
Thanx
NGL
From: Dan Petermann
Sent: Wednesday, November 21, 2012 11:15 AM
To: WISPA General List
Subject: Re: [WISPA] Bullets
How does Dude work with Tranzeo 900 Gear and Bullet2s?
NGL
From: Josh Luthman
Sent: Thursday, November 22, 2012 9:07 AM
To: Paul Hendry
Cc: WISPA General List
Subject: Re: [WISPA] Mikrotik the dude
I'm using ROS. It is a known bug.
Josh Luthman
Office: 937-552-2340
Direct
Water could be correct, we have had about 5 inches of rain in the last week.
I will check that out.
Will cutting a slit in the cable solve the water problem?
Thanx for the info!
NGL
From: Josh Luthman
Sent: Wednesday, December 05, 2012 2:42 PM
To: WISPA General List
Subject: Re: [WISPA
Why? Do you have one in service?
NGL
--
From: Christian Palecek christ...@cybernet1.com
Sent: Tuesday, January 08, 2013 2:30 PM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Ubiquiti ERLite-3 3-port Router
I wouldn't touch one
how do you have them configured - Nanobridge to Nanobridge PTP
Channel bandwidth - 20
Link distance Under - 2 miles
Is there a high noise floor = 101
Same setup with Rockets
NGL
--
From: Matt Hoppes mhop...@indigowireless.com
Sent: Saturday
.
On Sat, Mar 30, 2013 at 1:48 PM, ~NGL~ n...@ngl.net wrote:
Will this work on a pure 24 volt solar system?
Will it tolerate the voltage changes 24 to 28 volts?
The specs say max 60 watts, is that with gear attached or just the TS?
Is it a true POE and switch in one unit
Where are you getting the surges?
Are you on battery power?
NGL
From: Clay Stewart
Sent: Saturday, March 30, 2013 11:04 AM
To: WISPA General List
Subject: Re: [WISPA] Ubiquiti's Tough Switch TS5
I would be concerned... although I am a big UBNT fan, out of 8 TS5s, 1/2 have
failed due
We only have 24 volt battery available, charged by solar, so total wattage is
very important. Sounds like you use more watts then we can supply without
adding more solar..
NGL
From: Clay Stewart
Sent: Saturday, March 30, 2013 12:24 PM
To: WISPA General List
Subject: Re: [WISPA
Lets see if I understand the function of a TS-5
If I use ports 1,2 and 3 as POE's and ports 4 and 5 as lan ports will the data
from the POE ports pass to the lan ports?
IN other words is the TS-5 a all in one unit?
NGL
From: ~NGL~
Sent: Saturday, March 30, 2013 1:04 PM
To: WISPA General
, OH 45373
What kind of throughput can I expect with a pair of Bullet M5's PTP with 24
DBI Grids and pure LOS at 2-5 miles?
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
___
Wireless mailing
How else can it be grounded?
NGL
--
From: Matt Hoppes mhop...@indigowireless.com
Sent: Wednesday, May 22, 2013 7:49 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Anyone home
I don't believe that's a proper ground
Matt
The TS-5 is a 24 volt DC unit intended to run on batteries.
NGL
--
From: Matt Hoppes mhop...@indigowireless.com
Sent: Wednesday, May 22, 2013 7:54 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Anyone home
Unless your battery
I have the tower and most of the radios are grounded, which in turn would
more then likely ground the negative side of the DC. If not how do I ground
the TS-5
NGL
--
From: Matt Hoppes mhop...@indigowireless.com
Sent: Wednesday, May 22, 2013 8:11
Most of the radios are Tranzeo TR-902's they have a ground stud on them
connected to the tower.
NGL
--
From: Matt Hoppes mhop...@indigowireless.com
Sent: Wednesday, May 22, 2013 8:24 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA
OK how do I ground it without opening the case and voiding the warrenty?
NGL
--
From: Mike Hammett wispawirel...@ics-il.net
Sent: Wednesday, May 22, 2013 8:37 AM
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] Anyone home
Please
Can I block all Torrents using the Ubiquiti ERLite-3 ?
Thanx
NGL
ERLite-3
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
inline: flag.gif___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org
I am trying to stop or hinder the copyright infringement problem.
Anyone have a good answer?
NGL
From: Josh Reynolds
Sent: Monday, June 03, 2013 11:46 AM
To: wireless@wispa.org
Subject: Re: [WISPA] Blocking Torrents - Steve
I agree with Steve. There are tons of ways to obfuscate
Where do I set the limit?
In the router or radio?
How many?
NGL
From: Bryce Duchcherer
Sent: Monday, June 03, 2013 12:51 PM
To: WISPA General List
Subject: Re: [WISPA] Blocking Torrents
You don't necessarily need to block torrents. They can be used for legitimate
uses, such as Linux
How do I add more than 32 Client on a Bullet2 HP. At 32 the add button is
greyed out.
Thanx'
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
inline: flag.gif___
Wireless mailing list
Wireless@wispa.org
http
What is a good way to monitor and control bandwidth usage.
I am looking for a system that will not cost a arm and a leg.
I am considering converting to tier pricing .
Any suggestions?
Thanx
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
inline
I need a means to regulate the voltage coming out of the Solar Controller I
need a constant 24 volts for Tranzeo and Ubiquiti radios. I now have between 25
and 29 volts.
Any suggestions?
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
inline
physical separation should we plan on between the Tranzeo units and
the Nanobridges?
Thanx
NGL
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
inline
What do you mean by spectrum separation?
NGL
From: Josh Luthman
Sent: Thursday, August 08, 2013 4:38 PM
To: WISPA General List
Subject: Re: [WISPA] 5.8 Separation
Ideally 10 feet vertically. Assuming you have spectrum separation, too.
Josh Luthman
Office: 937-552-2340
10 foot is hard to get on a 65 foot tower, what is the minimum I can get away
with?
Thanx
NGL
From: Josh Luthman
Sent: Thursday, August 08, 2013 4:46 PM
To: WISPA General List
Subject: Re: [WISPA] 5.8 Separation
If the Tranzeo AP is at 5725 in 20 MHz you'll want to be 5745
Every thing is a duplicate link side by side.
NGL
From: Josh Luthman
Sent: Thursday, August 08, 2013 4:52 PM
To: WISPA General List
Subject: Re: [WISPA] 5.8 Separation
Get as much as possible. Are they pointing the same direction or away? If
they're different frequencies, I would
1 - 100 of 182 matches
Mail list logo