Re: [WISPA] Slow Internet across MT Router
Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
Version 2.9.32- Travis - I don't know much about routers/MT. When you say Interface Stats do you mean looking at the Interface List? If so, it shows like 1/2 loaded, max. -Original Message- From: Travis Johnson [mailto:[EMAIL PROTECTED] Sent: Friday, April 13, 2007 06:37 PM To: 'WISPA General List' Subject: Re: [WISPA] Slow Internet across MT Router What version of MT? What do the interface stats show on the MT box when it's slow? Travis Ron Wallace wrote: Travis,YES, Ihave an ethernet switch on either side of the MT box. On the Inet side, 2.7 Mb/s, on the Wireless side, beforethe MT box whenit seems loaded, that iswhen itsslow. -Original Message-From: Travis Johnson [mailto:[EMAIL PROTECTED]: Friday, April 13, 2007 06:31 PMTo: 'WISPA General List'Subject: Re: [WISPA] Slow Internet across MT RouterHi,What do you mean this only happens across the Mikrotik box? If you by-pass the MT box, everything is fine?TravisMicroservRon Wallace wrote: To All,I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit.PLEASE HELP, I'M A DUNCE.Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED]@tigernet.bz-- WISPA Wireless List: [EMAIL PROTECTED]/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
Yes... MT in combination with the SBE card will cause lockups. Never found a fix, instead just had to replace with a different solution. Travis Microserv Sam Tetherow wrote: Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Slow Internet across MT Router
Hello Sam, Curious if both DS3 cards have the lockup problem? You do still have two of them, right? If so, it is unlikely you have two bad DS3 cards. Especially because if they are the ones you bought from me I know they are good! grin We never had any trouble with them interfacing our ATT DS3s. Sure sounds like a hardware issue or possibly MikroTik made a change in their code that now causes this problem. MikroTik has been known to make a change in their drivers (unknowingly) and render an entire revision of make and model interface useless. Happened to us with Intel SC Fiber adapters. Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Saturday, April 14, 2007 4:04 AM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Slow Internet across MT Router
Wow, then it has to be a MikroTik issue. We ran them under v2.8.x for better than a year (or two?) can't remember that far back these days it seems! sigh Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson Sent: Saturday, April 14, 2007 8:08 AM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Yes... MT in combination with the SBE card will cause lockups. Never found a fix, instead just had to replace with a different solution. Travis Microserv Sam Tetherow wrote: Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
We use SBE DS-3 cards and have had zero lockups. Currently on MT 2.9.41. Been running with them for about 6 months, knock on wood. We have them on SuperMicro hardware, which tends to be pretty stable. I mention that only in case it is an issue of card and motherboard combination. Dave - Original Message - From: Brad Belton [EMAIL PROTECTED] To: 'WISPA General List' [EMAIL PROTECTED] Sent: Saturday, April 14, 2007 10:34 AM Subject: RE: [WISPA] Slow Internet across MT Router Hello Sam, Curious if both DS3 cards have the lockup problem? You do still have two of them, right? If so, it is unlikely you have two bad DS3 cards. Especially because if they are the ones you bought from me I know they are good! grin We never had any trouble with them interfacing our ATT DS3s. Sure sounds like a hardware issue or possibly MikroTik made a change in their code that now causes this problem. MikroTik has been known to make a change in their drivers (unknowingly) and render an entire revision of make and model interface useless. Happened to us with Intel SC Fiber adapters. Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Saturday, April 14, 2007 4:04 AM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
Yep, still got both of them and yes there were the two I bought from you. I got an Imagestream Rebel in last week and am swapping it in tonight. I'm sure the issue is driver related and I have tried various version of RouterOS from 2.9.23 through 2.9.42 and all of the will lock up if left running. It depends on load on the machine as well as time up. Which makes me think there is a memory leak somewhere in the driver code. The machines were put together using the the MB, RAM, NIC and CPUs you said you used in your router so I don't think it was that either. Sam Tetherow Sandhills Wireless Brad Belton wrote: Hello Sam, Curious if both DS3 cards have the lockup problem? You do still have two of them, right? If so, it is unlikely you have two bad DS3 cards. Especially because if they are the ones you bought from me I know they are good! grin We never had any trouble with them interfacing our ATT DS3s. Sure sounds like a hardware issue or possibly MikroTik made a change in their code that now causes this problem. MikroTik has been known to make a change in their drivers (unknowingly) and render an entire revision of make and model interface useless. Happened to us with Intel SC Fiber adapters. Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Saturday, April 14, 2007 4:04 AM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
I've run 2 different SBE card in 3 machines. Two of them were identical Intel server MBs with 3GHz Intel CPUs and Kingston RAM. The other was a Biostar MB, Kingston RAM, (and Ultra RAM) and a dual core Pentium 4 (the biostar was just a board we for another computer so I swapped it in as a different set of hardware to check). All of the exhibit the same behaviour they will run under normal load for between a day and a week and then just lock up hard. The Intel setup mentioned was a duplicate of what Brad successfully used on his network. To aggrevate the problem all I need to do is fire up a popular torrent on an unmetered connection in the office and it will not last a full 24 hours before lock up. Glad to hear that they do work for some people because I won't feel bad about selling them on ebay then ;) Sam Tetherow Sandhills Wireless David Sovereen wrote: We use SBE DS-3 cards and have had zero lockups. Currently on MT 2.9.41. Been running with them for about 6 months, knock on wood. We have them on SuperMicro hardware, which tends to be pretty stable. I mention that only in case it is an issue of card and motherboard combination. Dave - Original Message - From: Brad Belton [EMAIL PROTECTED] To: 'WISPA General List' [EMAIL PROTECTED] Sent: Saturday, April 14, 2007 10:34 AM Subject: RE: [WISPA] Slow Internet across MT Router Hello Sam, Curious if both DS3 cards have the lockup problem? You do still have two of them, right? If so, it is unlikely you have two bad DS3 cards. Especially because if they are the ones you bought from me I know they are good! grin We never had any trouble with them interfacing our ATT DS3s. Sure sounds like a hardware issue or possibly MikroTik made a change in their code that now causes this problem. MikroTik has been known to make a change in their drivers (unknowingly) and render an entire revision of make and model interface useless. Happened to us with Intel SC Fiber adapters. Best, Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Saturday, April 14, 2007 4:04 AM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though. I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself. Sam Tetherow Sandhills Wireless Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
Travis, YES, Ihave an ethernet switch on either side of the MT box. On the Inet side, 2.7 Mb/s, on the Wireless side, beforethe MT box whenit seems loaded, that iswhen itsslow. -Original Message- From: Travis Johnson [mailto:[EMAIL PROTECTED] Sent: Friday, April 13, 2007 06:31 PM To: 'WISPA General List' Subject: Re: [WISPA] Slow Internet across MT Router Hi, What do you mean this only happens across the Mikrotik box? If you by-pass the MT box, everything is fine? Travis Microserv Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
What version of MT? What do the interface stats show on the MT box when it's slow? Travis Ron Wallace wrote: Travis, YES, Ihave an ethernet switch on either side of the MT box. On the Inet side, 2.7 Mb/s, on the Wireless side, beforethe MT box whenit seems loaded, that iswhen itsslow. -Original Message- From: Travis Johnson [mailto:[EMAIL PROTECTED]] Sent: Friday, April 13, 2007 06:31 PM To: 'WISPA General List' Subject: Re: [WISPA] Slow Internet across MT Router Hi, What do you mean this only happens across the Mikrotik box? If you by-pass the MT box, everything is fine? Travis Microserv Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Slow Internet across MT Router
Hi, What do you mean this only happens across the Mikrotik box? If you by-pass the MT box, everything is fine? Travis Microserv Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Slow Internet across MT Router
I use MT 2.9.32 currently on my Dell PowerEdge 350 (850 MHz w/ 512M Memory). I am constantly pegging 6M of throughput, and that is around 2-8% CPU utilization. I have two guesses... 1) you are creating a network loop between switches (either 2 MT boxes or a MT box and a cat5 cable between the switches). This would start out working fine, but then as utilization goes up the network is brought to it's knees. 2) There is a duplex mis-match. You can't force one side if the other side is auto-negotiating. The only way to tell this is to have a managed switch and look at the errors. From the way it sounds, I would put money on guess 1. Eric From: [EMAIL PROTECTED] on behalf of Ron Wallace Sent: Fri 4/13/2007 5:34 PM To: WISPA General List Subject: Re: [WISPA] Slow Internet across MT Router Travis, YES, Ihave an ethernet switch on either side of the MT box. On the Inet side, 2.7 Mb/s, on the Wireless side, beforethe MT box whenit seems loaded, that iswhen itsslow. -Original Message- From: Travis Johnson [mailto:[EMAIL PROTECTED] Sent: Friday, April 13, 2007 06:31 PM To: 'WISPA General List' Subject: Re: [WISPA] Slow Internet across MT Router Hi, What do you mean this only happens across the Mikrotik box? If you by-pass the MT box, everything is fine? Travis Microserv Ron Wallace wrote: To All, I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM. I have a MikroTik in P3 900MHz, w/ 500Mb of ram. Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit. PLEASE HELP, I'M A DUNCE. Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ winmail.dat-- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
