Hi Gary,
On 4/26/2023 7:59 AM, K9RX wrote:
I had sent this on the 16^th of April but did not get a response… I
believe these are germane questions – and as far as I’ve been able to
tell they are not addressed in the manual. These pertain to the use of
“average” when running Q65. I’ve asked
Mail for Windows
From: Joe Taylor via wsjt-devel
Sent: Sunday, April 16, 2023 11:48 AM
To: WSJT software development
Cc: Joe Taylor
Subject: Re: [wsjt-devel] Q65 false decode
Hi Gary and Don:
Those are not false decodes. They are not spurious decodes. Evidently
you have "Enable aver
for Windows
From: Joe Taylor via wsjt-devel
Sent: Sunday, April 16, 2023 11:48 AM
To: WSJT software development
Cc: Joe Taylor
Subject: Re: [wsjt-devel] Q65 false decode
Hi Gary and Don:
Those are not false decodes. They are not spurious decodes. Evidently
you have "Enable averaging&qu
Hi Gary and Don:
Those are not false decodes. They are not spurious decodes. Evidently
you have "Enable averaging" turned on, but not "Auto Clear Avg after
decode". And you did not do a "Clear Avg" manually. Not a good plan,
generally, for the type of operating you are doing. You must
this.
Gary
Sent from Mail for Windows
From: Charles Suckling via wsjt-devel
Sent: Sunday, April 16, 2023 10:08 AM
To: WSJT software development
Cc: Charles Suckling
Subject: Re: [wsjt-devel] Q65 false decode
Hi Gary
What setting do you have for Auto clear avg after decode ( under the decode
tab
Hi Gary
What setting do you have for Auto clear avg after decode ( under the decode
tab)?
For normal operation this should be checked. I suspect you have it
unchecked, so that messages which are still in the accumulator appear as
'fresh' decodes. In such a case you can sometimes see decodes
I have noticed a similar problem. Spurious decode. Sometimes the old decode can even be from a previous contact. Very strange. Never did this before. v2.6Sent from my iPadOn Apr 16, 2023, at 9:30 AM, K9RX via wsjt-devel wrote:Hello all. I was running Q65-60A on 6M EME this morning. I am
Hello all.
I was running Q65-60A on 6M EME this morning. I am using version 2.6.0 b15b7. I
have DEEP and ENA AVG turned on. I decoded the station I was calling every
sequence. However twice WSJT decoded the “proper” signal (right doppler and
seq) but then decoded, in the AVG window, a 2nd
