Indeed it is off. But I found that having it on meant not getting AVG decodes when I was watching for Lance, W7GJ, do his thing testing out the contest mode. I had more decodes with it off than with it on. But I’ll change it.
That does makes sense – since I hadn’t seen this before like this. Gary Sent from Mail for Windows From: Charles Suckling via wsjt-devel Sent: Sunday, April 16, 2023 10:08 AM To: WSJT software development Cc: Charles Suckling Subject: Re: [wsjt-devel] Q65 false decode Hi Gary What setting do you have for Auto clear avg after decode ( under the decode tab)? For normal operation this should be checked. I suspect you have it unchecked, so that messages which are still in the accumulator appear as 'fresh' decodes. In such a case you can sometimes see decodes after the other station has stopped transmitting. 73 Charlie DL3WDG On Sun, 16 Apr 2023 at 15:31, K9RX via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Hello all. I was running Q65-60A on 6M EME this morning. I am using version 2.6.0 b15b7. I have DEEP and ENA AVG turned on. I decoded the station I was calling every sequence. However twice WSJT decoded the “proper” signal (right doppler and seq) but then decoded, in the AVG window, a 2nd that was one sequence previously. Unfortunately I didn’t see that my TX then reverted back to the original and was not the follow on (proper one). This happened again the next sequence but I caught it that time. Unfortunately I do not normally have SAVE turned on so I don’t have the data file. I mentioned this as an FYI re false decodes. I don’t remember ever getting this before (this version). But I have a question: I have Q65-60A as a configuration and switch to it when doing EME. Can I set the SAVE as on for this config and will it then be off for the other configs I have built? Gary K9RX You can see below at 1303 I got, at -24, his RX3. WSJT started to send TX4 at 1304. Then it (almost) immediately decoded his TX1 and WSJT switched back to TX2. I did not catch this. The next sequence you can see this repeated at 1307. I have since turned on SAVE DECODED and finally you can see false (AVG) decodes at 1309 – 1317. He was not transmitting during these sequences. I can send tis file if that would help. 1302 Tx 1500 : W5WP K9RX -26 1303 -24 2.8 1442 : K9RX W5WP R-32 q3 1304 Tx 1500 : W5WP K9RX RRR 1303 -24 2.8 1447 : K9RX W5WP EM00 q35 1304 Tx 1500 : W5WP K9RX -24 1305 -19 2.8 1439 : K9RX W5WP R-32 q3 1306 Tx 1500 : W5WP K9RX RRR 1307 -24 2.8 1439 : K9RX W5WP RRR q3 1308 Tx 1500 : W5WP K9RX 73 1307 -23 2.8 1441 : K9RX W5WP R-32 q37 1308 Tx 1500 : W5WP K9RX 73 1309 -24 2.8 1441 : K9RX W5WP R-32 q38 1311 -26 2.8 1441 : K9RX W5WP R-32 q39 1313 -28 2.8 1441 : K9RX W5WP R-32 q3* 1315 -29 2.8 1441 : K9RX W5WP R-32 q3* 1317 -31 2.8 1441 : K9RX W5WP R-32 q3* 1319 -32 2.8 1441 : K9RX W5WP R-32 q3* Sent from Mail for Windows _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
