Hi Gary and Don:
Those are not false decodes. They are not spurious decodes. Evidently
you have "Enable averaging" turned on, but not "Auto Clear Avg after
decode". And you did not do a "Clear Avg" manually. Not a good plan,
generally, for the type of operating you are doing. You must learn to
use these tools -- it's not all automated, nor could it be. The
operator is important, and must make informed choices.
Like all other settings, the "Save all" setting is specific to each
Configuration you have defined.
-- 73, Joe, K1JT
On 4/16/2023 9:55 AM, Don Hawbaker via wsjt-devel wrote:
I have noticed a similar problem. Spurious decode. Sometimes the old
decode can even be from a previous contact. Very strange. Never did
this before. v2.6
Sent from my iPad
On Apr 16, 2023, at 9:30 AM, K9RX via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hello all.
I was running Q65-60A on 6M EME this morning. I am using version 2.6.0
b15b7. I have DEEP and ENA AVG turned on. I decoded the station I was
calling every sequence. However twice WSJT decoded the “proper” signal
(right doppler and seq) but then decoded, in the AVG window, a 2^nd
that was one sequence previously. Unfortunately I didn’t see that my
TX then reverted back to the original and was not the follow on
(proper one).
This happened again the next sequence but I caught it that time.
Unfortunately I do not normally have SAVE turned on so I don’t have
the data file.
I mentioned this as an FYI re false decodes. I don’t remember ever
getting this before (this version).
But I have a question: I have Q65-60A as a configuration and switch to
it when doing EME. Can I set the SAVE as on for this config and will
it then be off for the other configs I have built?
Gary
K9RX
You can see below at 1303 I got, at -24, his RX3. WSJT started to send
TX4 at 1304. Then it (almost) immediately decoded his TX1 and WSJT
switched back to TX2. I did not catch this. The next sequence you can
see this repeated at 1307. I have since turned on SAVE DECODED and
finally you can see false (AVG) decodes at 1309 – 1317. He was not
transmitting during these sequences. I can send tis file if that would
help.
*1302 Tx 1500 : W5WP K9RX -26*
*1303 -24 2.8 1442 : K9RX W5WP R-32 q3*
*1304 Tx 1500 : W5WP K9RX RRR*
*1303 -24 2.8 1447 : K9RX W5WP EM00 q35*
*1304 Tx 1500 : W5WP K9RX -24*
*1305 -19 2.8 1439 : K9RX W5WP R-32 q3*
*1306 Tx 1500 : W5WP K9RX RRR*
*1307 -24 2.8 1439 : K9RX W5WP RRR q3*
*1308 Tx 1500 : W5WP K9RX 73*
*1307 -23 2.8 1441 : K9RX W5WP R-32 q37*
*1308 Tx 1500 : W5WP K9RX 73*
*1309 -24 2.8 1441 : K9RX W5WP R-32 q38*
*1311 -26 2.8 1441 : K9RX W5WP R-32 q39*
*1313 -28 2.8 1441 : K9RX W5WP R-32 q3**
*1315 -29 2.8 1441 : K9RX W5WP R-32 q3**
*1317 -31 2.8 1441 : K9RX W5WP R-32 q3**
*1319 -32 2.8 1441 : K9RX W5WP R-32 q3**
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
