Hi Gary What setting do you have for Auto clear avg after decode ( under the decode tab)?
For normal operation this should be checked. I suspect you have it unchecked, so that messages which are still in the accumulator appear as 'fresh' decodes. In such a case you can sometimes see decodes after the other station has stopped transmitting. 73 Charlie DL3WDG On Sun, 16 Apr 2023 at 15:31, K9RX via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hello all. > > > > I was running Q65-60A on 6M EME this morning. I am using version 2.6.0 > b15b7. I have DEEP and ENA AVG turned on. I decoded the station I was > calling every sequence. However twice WSJT decoded the “proper” signal > (right doppler and seq) but then decoded, in the AVG window, a 2nd that > was one sequence previously. Unfortunately I didn’t see that my TX then > reverted back to the original and was not the follow on (proper one). > > > > This happened again the next sequence but I caught it that time. > Unfortunately I do not normally have SAVE turned on so I don’t have the > data file. > > > > I mentioned this as an FYI re false decodes. I don’t remember ever getting > this before (this version). > > > > But I have a question: I have Q65-60A as a configuration and switch to it > when doing EME. Can I set the SAVE as on for this config and will it then > be off for the other configs I have built? > > > > Gary > > K9RX > > > > You can see below at 1303 I got, at -24, his RX3. WSJT started to send TX4 > at 1304. Then it (almost) immediately decoded his TX1 and WSJT switched > back to TX2. I did not catch this. The next sequence you can see this > repeated at 1307. I have since turned on SAVE DECODED and finally you can > see false (AVG) decodes at 1309 – 1317. He was not transmitting during > these sequences. I can send tis file if that would help. > > > > > > *1302 Tx 1500 : W5WP K9RX -26* > > *1303 -24 2.8 1442 : K9RX W5WP R-32 q3* > > *1304 Tx 1500 : W5WP K9RX RRR* > > *1303 -24 2.8 1447 : K9RX W5WP EM00 q35* > > *1304 Tx 1500 : W5WP K9RX -24* > > *1305 -19 2.8 1439 : K9RX W5WP R-32 q3* > > *1306 Tx 1500 : W5WP K9RX RRR* > > *1307 -24 2.8 1439 : K9RX W5WP RRR q3* > > *1308 Tx 1500 : W5WP K9RX 73* > > *1307 -23 2.8 1441 : K9RX W5WP R-32 q37* > > *1308 Tx 1500 : W5WP K9RX 73* > > *1309 -24 2.8 1441 : K9RX W5WP R-32 q38* > > *1311 -26 2.8 1441 : K9RX W5WP R-32 q39* > > *1313 -28 2.8 1441 : K9RX W5WP R-32 q3** > > *1315 -29 2.8 1441 : K9RX W5WP R-32 q3** > > *1317 -31 2.8 1441 : K9RX W5WP R-32 q3** > > *1319 -32 2.8 1441 : K9RX W5WP R-32 q3** > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
