Did you read my previous message (attacked) or can't I express myself ok?
I said it happens ( also) in linux, and quick halt tx/enable tx releases
audio . Read again , please.
--
Saku
OH1KH
20. maaliskuuta 2021 11.40.17 GMT+02:00 Alessandro Gorobey via wsjt-devel
kirjoitti:
>Hi Saku
>
>thi
Hi Saku
this is not limited to MacOS
Also in other platforms (windows, linux)
Try "Halt TX" instead of press "Tune"
Il 20/03/2021 10:12, Saku ha scritto:
In addition:
A) This happens with FT8. It does not happen with FT4
B) If "tune" is not used, I.E. just band changed and double clicked CQ
c
In addition:
A) This happens with FT8. It does not happen with FT4
B) If "tune" is not used, I.E. just band changed and double clicked CQ
caller TX works with audio. Using "Tune" button causes bug.
Saku kirjoitti 20.3.2021 klo 8.44:
Hey !
Now when testing more carefully after reading these
Hey !
Now when testing more carefully after reading these messages I can now
reproduce this 100% with GA 2.3.0 but that problem has been there with
earlier versions as well.
Fedora 32, wsjt-x self compiled, Icom7300 USB audio:
input: alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog
In the past few days I experienced a loss of transmit audio after
leaving WSJT-X 2.4.0-rc3 (64-bit Win10) open on my station laptop for
several hours in FT8 mode. I'm using my IC-7610's built in USB codec
and CAT transmit. In the last two instances, rather than closing and
restarting the prog
Hi Michael,
I found the issue. When I use Win4Icom, I normally run com0com to create
virtual serial port pairs. These pairs are used in Win4Icom as virtual CAT
ports and WSJT-X uses one of these ports. I recently decided to switch to
VSPE for the port emulation. It appears that VSPE creates th
Could you please try this version of WSJT-X and see if it behaves?
https://www.dropbox.com/s/xhaaaikqsfulykn/wsjtx-2.4.0-rc3-win64.exe?dl=0
Mike W9MDB
On Wednesday, March 17, 2021, 06:40:49 AM CDT, Craig
wrote:
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
T
Thu, 18 Mar 2021 12:04:07 + (UTC)
> From: Black Michael mailto:mdblac...@yahoo.com>>
> To: "wsjt-devel@lists.sourceforge.net
> <mailto:wsjt-devel@lists.sourceforge.net>"
><mailto:wsjt-devel@lists.sourceforge.net>>
> Subject: Re:
period.
Al Pawlowski, K6AVP
Los Osos, CA USA
> Date: Thu, 18 Mar 2021 09:28:15 +0200
> From: Saku mailto:oh...@sral.fi>>
> To: wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net>
> Subject: Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue
>
I wonder if some of these rigs are avoiding hot switching PTT and ya'll are in
a borderline case.
Under the Advanced tab try changing the PTT delay to 0.2s instead of 0.1s.
Mike W9MDB
On Thursday, March 18, 2021, 02:49:51 AM CDT, Saku wrote:
HI!
This TX without audio (randomly
HI!
This TX without audio (randomly) has been there from "stone age". There
were some versions backwards that it appeared very seldom. Now with
2.3.0 again little more often.
Usually then when you see rare square or DX and start to transmit ;-( So
always look at Pwr meter and stop/start TX if
Another report of the rc3 MacOS audio issue as well. Flex 6600, SmartSDR for
Mac 1.4.34, and Intel Mac mini OS 11.2.3.
Not always reproducible, but relatively frequent.
George J Molnar, KF2T
College Park, Maryland, USA
___
wsjt-devel mailing list
Hi Bill and [WSJT-X Devel] group:
More info on this bug:
This “TX but no audio” on first transmission after band change issue persists
as well in 2.4-rc3, using an iMac and KX3. Second TX cycle, all is well. The
behaviour is generally reproducible, but not always. I’ve seen it on FT8,
MSK14
>
> I've been having the same issue - no transmit audio although TUNE does
> work. Same setup except I'm connected to the IC7300 directly via USB.
>
dave
k2lyv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/li
For a test please connect WSJT_X directly to the 7300 instead of Win4Icom.See
if that makes a difference.
Mike W9MDB
On Wednesday, March 17, 2021, 06:40:49 AM CDT, Craig
wrote:
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300 vi
For a test please connect WSJT-X directly to the 7300 instead of Win4Icom.See
if that makes a difference.
Mike W9MDB
On Wednesday, March 17, 2021, 06:40:49 AM CDT, Craig
wrote:
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300 via
16 matches
Mail list logo
