I'd second Greg's request.
Also, is there something I haven't set that is preventing replies to my
callsign appearing in the RX Frequency pane? As it is now, they only appear in
the Band Activity pane. Yesterday evening (EU Time), 20m was so busy with FT8
that I had to wait for a lot of
On 04/07/2017 05:01, Phil Karn wrote:
Has anyone installed or rebuilt wsjtx on the new Debian release 9.0,
codename "stretch"?
Stretch dropped some packages that weren't being supported upstream,
apparently including libreadline6 that wsjtx has as a dependency.
libreadline5 is still present in
Trivial matter: uncheck the box labelled 'Control' to stop displaying the wide
graph controls - - when WSJT-X is restarted, the controls remain hidden but
there is the small issue that the box has become checked.
Erik EI4KF.
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only way to reset the frequency is to either
On 04/07/2017 04:05, Jordan Sherer wrote:
I've reproduced this partly on my IC-706MKIIG using r going from
JT to FT modes on 20m. CAT control works perfectly in JT mode. In
switching to FT, the software does not move to the correct frequency.
It also does not let me open the drop down to
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only way to reset the frequency is to either
I agree with Greg.
FT8 combines the best of 'slow' and 'fast' modes but operationally it's
quite challenging because there's a lot of information to absorb and
very little thinking time. More automation is appropriate, IMHO.
As far as grabbing a response to a CQ from the stack goes, for general
Hi Rick,
comments in line below.
On 04/07/2017 01:50, K5GZR - Rick wrote:
Couldn't figure out how to reply on the SourceForge site. Sorry about
possible weird reply format.
This list is an email one. SourceForge, sensibly IMHO, do not attempt to
wrap email forums in fancy web interfaces.
Hi Bill -
I’ve started encountering the libreadline dependency when building wsjtx-x on
OS X since a couple of days ago when I updated my macports installation. The
wsjt-x build wants to see readline 6 whereas the latest macports installs
readline 7. On the other hand, the gnu octave version
Hi Steve,
I am pretty sure only Hamlib has a libreadline dependency and that is
optional. If you rebuild Hamlib with your preferred libreadline
installed you should be able stick with one version.
73
Bill
G4WJS.
On 04/07/2017 12:27, Steven Franke wrote:
Hi Bill -
I’ve started encountering
Hi Bill,
See below ..
On 7/4/2017 5:05 AM, Bill Somerville wrote:
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the
On 7/4/2017 5:07 AM, Bill Somerville wrote:
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only
Ok, joined the list.
I downloaded and installed WSJT-X v1.7.1-devel r7752, running on Windows 7
64bit. Having fun with JT8 on 14.079, but have noticed a tendency to not
decode strong signals. Tried turning rx gain down, but does not seem to
help. Loosing QSO's due to this. Other than
Bill,
I see the same problem Neil sees. I have tried both with and without
"Monitor returns to last used frequency" checked and see no difference. I
still have to manually change the frequency from the dropdown list.
Dan Malcolm - K4SHQ
-Original Message-
From: Bill Somerville
After successfully building WSJT-X for several months, today I experienced this
issue:
-
CMake Error at CMake/Modules/LibFindMacros.cmake:87 (message):
Required library hamlib NOT FOUND.
Install the library (dev version) and try again. If the library is already
installed, use
That was easy. Thanks Mike!
73 de Sebastian, W4AS
> On Jul 4, 2017, at 11:36 AM, Black Michael via wsjt-devel
> wrote:
>
> Sounds like something is hosed on your system.
>
> Try "enable-clean" and build again.
>
> de Mike W9MDB
>
>
> From: Seb
Doug - change to the latest build (7782 I think) as somewhere between your 7752
and 7782 that decoding problem on strong signals became not so prevalent.
Erik EI4KF.
From: svtdoug [mailto:svtd...@gmail.com]
Sent: 03 July 2017 19:16
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel]
Hello All,
There looks to be a fair bit of confusion around the names for readline. I
found several bugs that point to using:
libreadline-dev for Debian >= Stretch
You may need to enable a different repository to do that though.
https://packages.debian.org/search?suite=stretch=any=path
Mike,
> And does autoseq sequence to "TX 6" by itself? That would explain why
> autoseq modes get their time reset.
I suspect this may be the cause. Activity is low today so I have not had the
chance to test this.
If this is the case, I assume there should be a simple fix: if (auto_seq)
On 04/07/2017 15:21, Neil Zampella wrote:
Hi Neil,
I forgot to mention that the two options in WSJT-X
"Settings->General" "Monitor off at startup" and "Monitor returns to
last used frequency" control what happens when you start WSJT-X.
Switching configurations is equivalent to starting
When you say "double click" you are talking about the double-clicking the
message in the RX Frequency window? That will reset the start time as of right
now.
de Mike W9MDB
From: Neil Zampella
To: wsjt-devel@lists.sourceforge.net
Sent: Monday, July 3, 2017 6:44 PM
As I mentioned before .. this was happening WAY before FT8 was
introduced on non-autosequenced QSOs under JT65/JT9.
Neil, KN3ILZ
On 7/4/2017 11:24 AM, John Nelson wrote:
Mike,
And does autoseq sequence to "TX 6" by itself? That would explain why autoseq
modes get their time reset.
I
Doug ..
I'm just a member and alpha tester here, so you can take this with a
large teaspoon of salt but ...
The version you 'downloaded' is about 30 revisions behind. So anything
you're seeing may have already been fixed. Don't download any 'builds'
updates are fast and furious. Use
UM .. how else do you respond when using JT65/JT9 .. I don't use the
buttons on TAB 2. Double clicking on a response in the RX window when
I'm calling CQ I agree with, that should start the QSO, but double
clicking in the TX window should not as its a normal way to trigger the
next dialog is
First of all tnx to all the developers for the continuing great sftwe.
I was having problems compiling new version and this morning Mike W9MDB
offered to connect with me via Teamviewer to find the problems.
He solved them quickly and in addition, tweaked many other things, and
explained them
I went through the steps but when I got to JTSDK-QT I can't get it to build
wsjtx 1.7.1 with the new mode. Also I don't see the other programs after
building them ie WSJT and WSJT10. I see their folders but there's no icon to
click on for either of them to run the programs. What have I done
Bill, Neil,
That works for me now with r7782.
Dan – K4SHQ
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Tuesday, July 04, 2017 12:17 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Frequency doesn't shift when changing configurations
On 04/07/2017
Mike,
didn't help ... made the change, built r7782, no change. Made sure the
change was in the .cpp file, and cleaned the build tree. Built it again,
same thing, start equals the end time. See attached screen cap.
Neil, KN3ILZ
On 7/4/2017 1:56 PM, Black Michael wrote:
That sounds
Urp .. sent this reply directly to Bill .. so I'm including that here,
along with this update below:
On 7/4/2017 4:16 PM, Neil Zampella wrote:
On 7/4/2017 2:07 PM, Bill Somerville wrote:
On 04/07/2017 18:52, Neil Zampella wrote:
OK .. Scenario I often use is this; I'm monitoring JT65/JT9
Sounds like something is hosed on your system.
Try "enable-clean" and build again.
de Mike W9MDB
From: Seb
To: Black Michael via wsjt-devel
Sent: Tuesday, July 4, 2017 10:31 AM
Subject: [wsjt-devel] CMake Eror
After successfully
I never learned exactly how debian/ubuntu checks dependencies, so please
excuse this possibly silly question.
In some cases, might it not be possible simply to do:
ln -s libread5 libread6 (??)
I've encountered other situations where the only important difference
between the old and newer
That sounds reasonable to mewhen doing this I just put it in for
double-clicking on either window. But the right side shouldn't need it.
Go ahead and remove the "set_dateTimeQSO(-1)" line from this section of code in
mainwindows.cpp and see if behaves for you.
void
On 7/4/2017 1:17 PM, Bill Somerville wrote:
On 04/07/2017 15:21, Neil Zampella wrote:
Hi Neil,
I forgot to mention that the two options in WSJT-X
"Settings->General" "Monitor off at startup" and "Monitor returns to
last used frequency" control what happens when you start WSJT-X.
Switching
On 04/07/2017 18:52, Neil Zampella wrote:
OK .. Scenario I often use is this; I'm monitoring JT65/JT9 on 20M,
I want to switch over to FT8 to see what is happening so I change
config. I'm thinking that the program on restart should check the
band and/or mode to verify the freq setting.
Neil,
It works for me with Configurations name "FT8 Config" & "JT65-JT9 Config".
Not sure why a renaming would make it work. All I know is it works for me @
r7782.
Dan - K4SHQ
-Original Message-
From: Neil Zampella [mailto:ne...@techie.com]
Sent: Tuesday, July 04, 2017 4:08 PM
To: WSJT
Hi guys, I've been subscribed to this list only since late April, so I'm
a newcomer. (I retired from Qualcomm after 20 years in late 2011 and had
a time- and energy-consuming bout with lymphoma in 2014, so I'm
belatedly discovering how much has gone on in the ham digital world. I
have some
On 05/07/2017 00:51, Phil Karn wrote:
I'd like to pull down a complete list archive in MBOX format so I can
add it to my mailbox archives and search it with my usual local tools as
though I'd been subscribed from the beginning, but sourceforge doesn't
seem to provide this option -- only a
37 matches
Mail list logo