"get on the list" for what?When you say you rolled back to a previous version
you mean Windows or WSJT-X?
Mike W9MDB
On Thursday, July 2, 2020, 08:12:33 AM CDT, N1trk Rob
wrote:
I use an ft991A, yaesu's most current rig in the hf/vhf line. I had a hamlib
error after a windows
I use an ft991A, yaesu's most current rig in the hf/vhf line. I had a
hamlib error after a windows update which of course happened Saturday
morning of field day with no internet :). I rolled back to a previous
version and fb. The yaesu ft 991 a has regularly been a bear to
configure. Perhaps
The FT-991 is in the list. Is there any particular problem with the FT-991A
that would require changes?
Mike W9MDB
On Thursday, July 2, 2020, 08:39:14 AM CDT, N1trk Rob
wrote:
Michael, sorry. I rolled back windows 10. Wsjt x worked fine after that.
The "list" would be the drop
On 02/07/2020 13:02, Claude Frantz wrote:
On 7/2/20 1:27 PM, Bill Somerville wrote:
Many thanks, Bill !
there are several issues with that series of rigs (you can include
the new FT-818ND in the list too), as there are with almost all rigs.
All have workarounds, why are you asking please,
Michael, sorry. I rolled back windows 10. Wsjt x worked fine after that.
The "list" would be the drop down list for rig set up in wsjt x. I also
use a flex 6600 which has worked flawlessly with wsjt x every time.
Thank you for all of your hard work.
Rob
n1trk
On Thu, Jul 2, 2020 at 9:25 AM
Hi Claude and Steve,
the easiest command to add a user to a group on Linux is:
sudo adduser $USER dialout
then log out (log out means log out of the desktop session, not just the
terminal window), and back in. Use the 'id' command to check membership.
On some systems (non-Linux) the correct
On 7/2/20 1:27 PM, Bill Somerville wrote:
Many thanks, Bill !
there are several issues with that series of rigs (you can include the
new FT-818ND in the list too), as there are with almost all rigs. All
have workarounds, why are you asking please, that will help focus on how
to answer?
I
Hi Mike,
we have had one report of a failure which turned out to be a CAT baud
rate setting issue. As far as I know it faithfully emulated the FT-817ND
and that model can be used without change, surprisingly including the
EEPROM reads that are used when being forced to use the FT-857 model
On 7/2/20 2:11 PM, Bill Somerville wrote:
there are several issues with that series of rigs (you can include
the new FT-818ND in the list too), as there are with almost all rigs.
All have workarounds, why are you asking please, that will help focus
on how to answer?
Many thanks again, Bill
On 02/07/2020 09:28, Claude Frantz wrote:
Hi all,
Can anyone here give us a short but precise description of the
problems related to the equipment mentioned in the subject, please ?
Thanks you !
Best wishes,
Claude (DJ0OT)
Hi Claude,
there are several issues with that series of rigs (you
Bill..have you found the FT-818ND to be compatible with the FT-817ND
backend?Perhaps should add that to the riglist so they don't feel like orphans.
Mike W9MDB
On Thursday, July 2, 2020, 07:15:04 AM CDT, Bill Somerville
wrote:
On 02/07/2020 13:02, Claude Frantz wrote:
On 7/2/20
" * CAT commands to change frequency are rejected if the rig is in SEND
mode, despite the fact that the rig can be tuned with the front
panel VFO knob when transmitting."
Same is true for the TS-590S (and probably the SG). Kenwood did not respond
when asked why.
73,
Andy, k3wyc
I just tested an FT-897 with a user yesterday and it's working fine in the
latest hamlib.
So hopefully whatever problem was being experienced has been fixed for the 817
and 897.
Mike W9MDB
On Thursday, July 2, 2020, 07:45:18 AM CDT, Bill Somerville
wrote:
Hi Mike,
we have had
Bill and Claude (and my SINCEREST apologies for hitting the “d” rather than “s”
and referring to you as you Clause),
The “dialout” group access is needed as a minimum for USB access to device such
as the SCU-17. As you are working primarily with a “tty” group - and for the
purposes of being
On 7/2/20 9:01 PM, Stephen VK3SIR wrote:
Hi Steve, Bill and all,
Bill and Claude (and my SINCEREST apologies for hitting the “d” rather than “s”
and referring to you as you Clause),
No problem, Steve !
The “dialout” group access is needed as a minimum for USB access to device such
as the
On 7/2/20 11:25 AM, Stephen VK3SIR wrote:
Many thanks, Stephen, for this very interesting information and for your
tips.
i.e. sudo usermod -a G adm,tty,disk,dialout,audio,video,plugdev
In my own environment, using Fedora, it was important to add "dialout".
Best wishes,
Claude (DJ0OT)
Clause,
A minor correction here: its -G
> i.e. sudo usermod -a -G adm,tty,disk,dialout,audio,video,plugdev
There is a little "over-caution" in places here !
73
Steve I
VK3VM / VK3SIR
-Original Message-
From: Claude Frantz
Sent: Thursday, 2 July 2020 7:58 PM
To:
Hi all,
Can anyone here give us a short but precise description of the problems
related to the equipment mentioned in the subject, please ?
Thanks you !
Best wishes,
Claude (DJ0OT)
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Claude,
There issues in some cases are wide and various but based primarily around some
"byte dropouts" and acknowledgement-of-commands.
As an example, an issue that is currently being investigated relates to
acknowledgement of commands (i.e. intermittently 3 bytes returned rather than
the
Ps:
> Also for the core developers: For the next source release, can the INSTALL
> files
> packaged at the top level of the tarball/within the "wsjtx.tar" tarball also
> be made
> consistent across the entire package i.e. update/incorporate the changes in
> the
> WSJT-X Linux build script
20 matches
Mail list logo
