Re: [wsjt-devel] Credits mismatch

out...do i have to upgradethe instructions you sent out for the upgrade look a bit daunting 73 David VK4BDJ On 26/09/14 05:50, Joe Taylor wrote: > Mike -- > >> Credits mismatch between About window and the manual > Thanks for catching this discrepancy. The online manual

Re: [wsjt-devel] Hamlib update - was: Credits mismatch

Hi Billyep im on Linux...ok will try and follow your instructions for the update of Hamlib3 Just worked Pierre F5LMI with about 30 watts so the new update of WSJT-X is working well 73 David VK4BDJ On 26/09/14 06:25, Bill Somerville wrote: > On 25/09/2014 21:02, David wrote: > Hi

[wsjt-devel] hamlib 3

Hi Billtrying to use the Script to build your latest Hamlib 3 followed the script to the letter and i get this error checking for gcc...gcc checkingwhether the C compiler worksNO configure: error: in /home/djmunn/hamlib-prefix/build C compiler cannot create executables -- 73 David

Re: [wsjt-devel] Decoder optimizations

Hi JoeI have upgraded my WSJT-X to r4507 and get the same Fortran error 73 David VK4BDJ On 20/11/14 05:02, Michael Black wrote: > Ran into an error with r4607. > Fortran runtime error: Index '659827' of dimension 1 of array 'ca' above > upper bound of 3360

Re: [wsjt-devel] Decoder optimizations

Hi Again..should be r4607 David On 20/11/14 05:36, David wrote: > Hi JoeI have upgraded my WSJT-X to r4507 and get the same Fortran > error > > 73 David VK4BDJ > > > > > > > On 20/11/14 05:02, Michael Black wrote: >> Ran into an error with r4607. >

Re: [wsjt-devel] Decoder optimizations

Hi Joe.. at line 102 of file filbig.f90 David On 20/11/14 05:40, Joe Taylor wrote: > David -- > > Does the error message report a line number? > > -- Joe > > On 11/19/2014 2:36 PM, David wrote: >> Hi JoeI have upgraded my WSJT-X to r4507 and get the sam

Re: [wsjt-devel] Decoder optimizations

HI Joe.it hasnt stopped to program decoding... just worked YC8HG David On 20/11/14 05:49, Michael Black wrote: > How did you get a line# and I didn't??? > > -Original Message- > From: David [mailto:djm...@bigpond.com] > Sent: Wednesday, November 19, 201

Re: [wsjt-devel] Decoder optimizations

Hi Joe.upgraded and no error messages when it runs on my system David On 20/11/14 06:27, Joe Taylor wrote: > Hi David, Michael, > > Thanks for catching the indexing error. Please try r4609. > > -- Joe > >>> Hi Joe.. >>> at line

[wsjt-devel] Back on air

Hi All..in December 2014 we had a very strong storm and it broke my fibreglass vertical down towards the base.yesterday i repaired it with a kit and now its back up in the air and im Tx on 10m jt65..sorry to be away so long...WSJT-X is up to date -- 73 David VK4BDJ

Re: [wsjt-devel] RC 5 preparation

Hi Joe and BillWSJT-X v1.5.0-devel working 100% hereim on 10m working into Asia 73 David VK4BDJ On 27/03/15 09:43, Bill Somerville wrote: > On 26/03/2015 23:34, Joe Taylor wrote: >> Hi all, > Hi Joe, >> Concerning a coming rc5: please look carefully again at the v1.4.0

[wsjt-devel] WSJT-X v1.6

Hi Bill or Joe where do i find the new version of WSJT-X would like to test it out also Bill does it compile on Linux with the same script that you compile v1.5 -- 73 David VK4BDJ -- BPM Camp - Free Virtual Workshop

[wsjt-devel] JTSDK

Hi Gregwhere do i find JTSDK for Linuxfound the Windows version but not the Linux Version -- 73 David VK4BDJ -- BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance

Re: [wsjt-devel] JTSDK

Hi Greg..just saw your post to Pino so will use that David On 15/04/15 06:31, David wrote: > Hi Gregwhere do i find JTSDK for Linuxfound the Windows version > but not the Linux Version -- 73 David

Re: [wsjt-devel] JTSDK

Hi againwith the autogen.sh set to mint it runs then comes up with an error that there are 4 packages missing.run make to get them and get an error that it cant find 2 list lines and doesnt say what the packages are...even with make simulate any work around 73 David VK4BDJ On 15

Re: [wsjt-devel] JTSDK

Hi again...pkgs were clang-3.5,packaging-dev,python-dev,python-pip have d/l via Synaptic nowto see if it works David On 15/04/15 07:48, KI7MT wrote: > Hi David, > > Ok, thanks, thats good feedback. > > The file that houses the "needed files in just that: > > cat ./

Re: [wsjt-devel] JTSDK

yep it worked and did the rest ot the install as per instructions David On 15/04/15 08:14, David wrote: > Hi again...pkgs were clang-3.5,packaging-dev,python-dev,python-pip > > have d/l via Synaptic nowto see if it works > > David > > On 15/04/15 07:48, KI7MT wrote:

Re: [wsjt-devel] JTSDK

Greg...i find synaptic the easy way for me..Mint 17.1 Rebecca with Cinn desktop... David On 15/04/15 08:21, KI7MT wrote: > Hi David, > > You shouldn't have to use synaptic. > > I need to look at that list, as python-pip should not be on it at all, > python3-pip should

Re: [wsjt-devel] JTSDK

yep it was python3-pip On 15/04/15 08:26, David wrote: > Greg...i find synaptic the easy way for me..Mint 17.1 Rebecca with > Cinn desktop... > > David > On 15/04/15 08:21, KI7MT wrote: >> Hi David, >> >> You shouldn't have to use synaptic. >> &

[wsjt-devel] Fwd: No ptt on odd

Forwarded Message Subject:No ptt on odd Date: Thu, 23 Apr 2015 11:37:38 +1000 From: David To: KI7MT Hi Gregthis is not a jtsdk problem.have upgraded WSJTX v1.6 and it shows as WSJTX v1.6.1. PTT does not work on odd minute but does work on even

Re: [wsjt-devel] Fwd: No ptt on odd

OK Bill no problemsjust doing my job as tester 73 David VK4BDJ On 23/04/15 11:50, Bill Somerville wrote: On 23/04/2015 02:44, David wrote: Hi David, Forwarded Message Subject:No ptt on odd Date: Thu, 23 Apr 2015 11:37:38 +1000 From: David To: KI7MT

Re: [wsjt-devel] JTSDK Nix v2.0.4 is Available

Hi Gregwhat is the best way to uninstall JTSDK v2.0.0 Nix 73 David VK4BDJ On 31/05/15 00:50, KI7MT wrote: > Hi Mike, > > Yes, there will definitely be a Windows version, I'm working on that today. > > > 73's > Greg, KI7MT > > On 05/30/2015 05:51 AM, Mich

[wsjt-devel] WSJT-X 1.7.0 dev

Hidoes the WSJT-X 1.7.0-devlop v 1641 use kvasd or the newer decoder that has been worked on for a while..as im using a vertical and signals are fairly weak here if the new decoder is being used it will give me some comparison to work by -- 73 David VK4BDJ

Re: [wsjt-devel] WSJT-X 1.7.0 dev

Hi Bill.thanks ...i thought as much...the new decoder works well here will keep trialling it. 73David VK4BDJ On 21/11/15 07:18, Bill Somerville wrote: > On 20/11/2015 21:15, David wrote: >> does the WSJT-X 1.7.0-devlop v 1641 use kvasd or the newer decoder >> that has been

Re: [wsjt-devel] Linux build of WSJT-X with jtsdk

Hi Allfound the same thing when i went to update yesterday problems with Hamlib3 script and 1.7.0.v 6278 on Linux 73 David VK4BDJ On 16/12/15 07:44, Joe Taylor wrote: > Hi Greg, > > Could you check to see whether jtsdk builds WSJT-X r6278 properly in > Linux? I checked in a b

[wsjt-devel] Im Partly Back

compiling on Linux any help here would be a bonus will be good to be back to testing the program 73 David VK4BDJ -- Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new

Re: [wsjt-devel] Im Partly Back

Hi Greg...tried this URL but it doesnt seem to work on sourceforge David On 16/04/14 17:56, Greg Beam wrote: > Hi David, > > Glad to see your back in action. > > Here's the URL: svn://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx > > It's probably best to ask B

Re: [wsjt-devel] Im Partly Back

Hi all...tnx for all the replies dumb fingers wont do what brain tells them putting in right letters sure helps tnx Bill for how to get cmake to work will try that after brekky David On 17/04/14 05:25, Joe Taylor wrote: > Hi David, > > On 4/16/2014 3:07 PM, David wrote: >>

[wsjt-devel] WSJTX 1.4.0

Hi Bill .thanks Bill for the install script every thing is working well i notice on the bottom line of the main GUI a box labelled Tx-Enable Disarmed it doesnt change when TX on JT65what is it meant to do 73 David VK4BDJ

Re: [wsjt-devel] WSJTX 1.4.0

Hi Billthanks for reply..i knew it would be some thing simple working with a dummy load at the moment havent got too much space for an antennahave a dipole that i could use in a inverted V but will also be a dog leg to fit it in. David On 21/04/14 06:18, Bill Somerville wrote: >

Re: [wsjt-devel] WSJT-X Building from source on Ubuntu 14.04 LTS.

hi Bill..just did an install on Ubuntu 14.04 32bit using this script found i had problems at the first cmake command...said it couldnt find a2x searched and found its part of asciidoc ..added that dep and then cmake worked.might be good to add that to the dep lists 73 David VK4BDJ On

Re: [wsjt-devel] WSJT-X Building from source on Ubuntu 14.04 LTS.

Hi Greg..I just added asciidoc from the repository in Ubuntu 14.04...it took some time to d/l and i think it may have put in Latex David On 21/04/14 13:56, KI7MT wrote: > Hi David, > > Be careful when installing Asciidoc --with-recommends, as this pulls in > dblatex, which on it&

Re: [wsjt-devel] WSJT-X Building from source on Ubuntu 14.04 LTS.

hat is the command and where do i use it David On 21/04/14 21:30, Bill Somerville wrote: > On 21/04/2014 12:04, KI7MT wrote: >> GM Bill, >> On 04/21/2014 04:52 AM, Bill Somerville wrote: >>> On 21/04/2014 04:56, KI7MT wrote: >>> >>> Hi Greg, >>>>

[wsjt-devel] WSJTX 1.4.0 r4063

Hi .I have just d/l and compiled the latest version compiles 100% but i have found the line at the top of the main GUI has the Files Mode etc line missing and F2 dosent bring up the settings GUI 73 David VK4BDJ

Re: [wsjt-devel] WSJTX 1.4.0 r4063

Hi again..should have said compiling on Ubuntu 14.04 David On 24/04/14 08:05, David wrote: > Hi .I have just d/l and compiled the latest version > compiles 100% > but i have found the line at the top of the main GUI has the > Files Mode etc line missing and F2 dosent bring up

Re: [wsjt-devel] WSJTX 1.4.0 r4063

Hi Bill.4062 was oksomeone updated main.cpp and that became 4063 and has the missing menu bar David On 24/04/14 08:20, Bill Somerville wrote: > On 23/04/2014 23:05, David wrote: > Hi David, >> Hi .I have just d/l and compiled the latest version >> compiles

Re: [wsjt-devel] WSJTX 1.4.0 r4063

Hi Billthe autoremove of appmenu did nothing here...as i said its in the update of the main.cpp file David On 24/04/14 08:30, Bill Somerville wrote: > On 23/04/2014 23:10, David wrote: > Hi David, >> Hi again..should have said compiling on Ubuntu 14.04 > Looks like the U

Re: [wsjt-devel] WSJTX 1.4.0 r4063

Hi Bill...for you information im using Ubuntu Gnome 14.04 which is Ubuntu 14.04 with Unity and setup for Gnome 3 David On 24/04/14 08:58, Bill Somerville wrote: > On 23/04/2014 23:30, Bill Somerville wrote: > Hi All, >> On 23/04/2014 23:10, David wrote: >> Hi David, >>

Re: [wsjt-devel] WSJTX 1.4.0 r4063

Hi Bill...ok i bow to your excellent knowledge its fixed the problem...your the man hi hi David On 24/04/14 09:30, Bill Somerville wrote: > On 23/04/2014 23:58, Bill Somerville wrote: > Hi All, >> On 23/04/2014 23:30, Bill Somerville wrote: >> Hi All, >>> On 23

[wsjt-devel] svn url

Hi Bill or Joe... has the svn url changed..was using 'svn co svn://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx wsjtx to d/l the latest version but the url wont work 73 David VK4BDJ -- "Accelerate Dev C

Re: [wsjt-devel] svn url

Hi Joe...thanks for the url you use that one works for me David On 30/04/14 07:55, Joe Taylor wrote: > Hi David, > > For various reasons I prefer the following checkout command: > > svn co https://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx wsjtx > > -- Joe, K1JT

[wsjt-devel] RF out

i was. yesterday between 0400 and 0600 zulu i was working ON,IW,F,DL and a few W's thrown in.this morning 2045 to 2145 more EU QSO's ..am i happy you bet i am all QSO's on WSJTX JT65 with the latest software version a good test for the software g

Re: [wsjt-devel] Revision 4138, and OnmiRig.h

Hi Joe.looks good on my large screen...will have to try it on a laptop sometime 73 David VK4BDJ On 15/05/14 01:17, Joe Taylor wrote: > Hi all, > > Some changes to the WSJT-X UI suggested by W7DLG were committed in > revision 4138. Margin widths are reduced to a minimu

Re: [wsjt-devel] Plan for beta release of WSJT-X v1.4

Hi .just had a look in my .local/WSJTX/save file and found about 40 .wav files saved when in the save config i have "none" 73 David VK4BDJ On 15/09/14 06:40, Michael Black wrote: Is your program crashing? Are you letting your computer go to sleep? How often is this happe

Re: [wsjt-devel] Plan for beta release of WSJT-X v1.4

Hi...deleted the 40 .wav files in the .local/share/WSJT-X/save dir and used WSJT-X but no new files have appeared running Linux WSJT-X 1.4 r4312...i update my files each day before i use the program 73 David VK4BDJ On 15/09/14 07:23, Michael Black wrote: How about a directory so we

Re: [wsjt-devel] TUNE and TX levels different, why?

TUNE could be the power setting recommended for your antenna tuner to do its job. And the TX level is for sending messages. My antenna tuner requires at least 25 watts to work properly, but I may only operate with 10 watts. David, AK2L -Original Message- From: Barry Jackson Sent

Re: [wsjt-devel] WSJT-x2.3.0 Anwser problem

Adrian, Regarding your “need to rework the station”, all the data you need to log the QSO is in WSJT-X’s ALL.TXT file. I occasionally have to use that to record a QSO. David, AK2L From: Adrian Sent: Tuesday, February 16, 2021 12:01 To: WSJT software development Subject: Re

[wsjt-devel] WSJT-X v2.3.1 Crash

This message appeared this morning: Running: C:\Program Files\wsjtx\bin\jt9 -s WSJT-X -w 1 -m 3 -e "C:\Program Files\wsjtx\bin" -a C:\Users\david\AppData\Local\WSJT-X -t C:\Users\david\AppData\Local\Temp\WSJT-X At line 614 of file C:\Users\bill\src\k1jt\wsjtx\lib\decoder.f90

Re: [wsjt-devel] 2021 Field Day Logging Issues

track of your total log count as I was. David, AK2L -Original Message- From: Al Pawlowski Sent: Monday, June 28, 2021 08:00 To: WSJT software development Subject: Re: [wsjt-devel] 2021 Field Day Logging Issues WSJT-x worked well for me this FD. However, I would suggest a couple of

[wsjt-devel] WSJTX latest versions

does it at bills suggestion i tried it with a Dummy load so its not a Antenna problem and it still does the same error...have tried version 1.6.1 and it works 100% so i dont now if its a bug in the latest versions any suggestions -- 73 David VK4BDJ

Re: [wsjt-devel] WSJTX latest versions

I have done that ...but that didnt answer the problem 73 David VK4BDJ On 09/08/16 06:20, Craig Treubig wrote: RE: [wsjt-devel] WSJTX latest versions Try recompiling hamlib -Original message- *From:* David *Sent:* Sunday, August 7 2016, 9:30 pm *To:* WSJT software

[wsjt-devel] FT8 testing

Hi Joe and Billhave d/l and compiled r7755 and am trialing it on 14.079 havent had any replies as yet but seems to be working well on Linux Mint 18.1 64bit will keep testing and giving reports to this group 73 David VK4BDJ

[wsjt-devel] FT8 frequency in VK

HI...i would suggest that 14.078 where JT9 would be might be a better frequency for FT8 than 14.079.in VK I know other ops would get curious as to what they are seeing and may be come interested in learning about FT8 73 David VK4BDJ

[wsjt-devel] Contact

Just had a contact with VK6KXW on FT8 his sig -14 and mine -13.works well 73 DAVID VK4BDJ -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm

[wsjt-devel] FT8 in r7800

Hi ...i have just used JTSDK to upgrade to r7800 compiled 100% but when i started WSJT-X it came up with a message "FT8 tempory disabled" went to the Mode tab and found FT8 greyed out used JT65 mode and it runs okis there a problem with FT8 that required this action 73 Da

[wsjt-devel] WSJT-X 1.7.1 r7812

Hi Joe and Bill.compiled r7812 with JTSDK and it works 100% .FT8 RX/TX working well with FT-450D rig.thanks guys maybe we will get a contact...usually on 20m 14074.00 for FT8 73 David VK4BDJ -- Check

[wsjt-devel] FT8 Testing

Hi All...been on 20m 17.074 calling CQ..Gary AG0N called me decode was -19 but the band here is up and down at the moment .tnx Gary hope we can do it sometime 73 David VK4BDJ -- Check out the vibrant tech

[wsjt-devel] FT8 on test

Hi ...made a couple of contacts VK4QG and N7XR..found out that once you double click on the callsign it has an Auto Seq feature.real neat helps with the Qso as the mode is so fast.. Love the mode and will continue to test it 73 David VK4BDJ

[wsjt-devel] FT8

Hi good sigs from USA..tnx guys for QSO David VK4BDJ -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/sla

[wsjt-devel] Remote control

Hi Allim remote control wsjtx1.8 from my upstairs computer using FT8 works very well 73 David VK4BDJ -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org!

Re: [wsjt-devel] wsjt-x connectivity with Kenwood TM-V71 + RC-D710

rconnecting the radio's audio signals to external TNCs or to a PC soundcard for say Echolink. If you really wanted to use WSJT on FM, you'd use this port Unless I'm missing something, this is a very apples and

Re: [wsjt-devel] flrig

I would agree that Flrig compatibility would be a great addition. You can find the XML API here: https://fedorahosted.org/fldigi/wiki/Documentation/HOWTO/xmlrpc --David KI6ZHD -- Comprehensive Server Monitoring

[wsjt-devel] Modifications to fmtest

I've been using the fmtest and associated programs to participate in a number of the FMTs. I've found that I mostly get good (< 1Hz) results but occasionally big errors. The latter seem to be due to weaker signals with QRM present. Because the current fmtest lets one set the "base" frequency to

[wsjt-devel] v1.4.0-rc2-win32

I'm receiving "hamlib: Invalid configuration while opening connection to rig". I had regular crashes with v 1.3 r 3673 but made many contacts. My setup is: Kenwood TS-2000 poll int = 2 sec Com3 for Cat rate 38400 data bits 8 stop bits one force control lines = rts ptt method = rts com5 transmit

[wsjt-devel] Feedback 1.5-r4989

I've been running 1.5 v4989 for about a week now. No problems; speedup is quite apparent. Decodes take about 1-2 seconds on my Core2Duo 1.5GHz Linux laptop; I've seen as many as 12 decodes at once. dave k2lyv -- Dive int

Re: [wsjt-devel] WSJT-X: ARMv7 builds

Hello Bill, There is quite a lot of documentation out there for this: https://www.raspberrypi.org/documentation/linux/kernel/building.md https://www.google.com/search?q=raspberry+pi+cross+compile+toolchain --David KI6ZHD On 04/27/2015 06:41 AM, Bill Somerville wrote: > Hi All, > >

[wsjt-devel] WSPR mode in WSJT-X 1.6.1-devel

this a lot better than using separate programs! It would make it a little easier if the WSPR and WSJT frequencies were not intermingled in the band select window, or perhaps given a different color or font. 73, David

[wsjt-devel] Band-hopping with v1.6.1 r5414

WSPR band-hopping with r5414 is working well here. I like being able to set different bands for different times of day. Is there a way to designate a band (such as 60 meters) for receive only? David NV0O -- One

[wsjt-devel] Feedback re wsjtx-exp

Upgraded JTSDK and built wsjtx-exp for Windows -- version 1.6.1devel r5425.. Ran for 14 hours on WSPR with band hopping (took a while to figure out how to set it up). Ran flawlessly; shifted band selections from day => sunset => night => sunrise => day. WSJTX seems to be fine, less testing so fa

[wsjt-devel] WSPR TX on "Rx only" bands

rking fine. David NV0O -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] test feedback

Built r5548 and tested with both WSPR and JT modes. works fine with JT65 and JT9. WSPR receives/decodes okay but wont transmit. I ran WSPR for 12 hours and after about 6 hours in it stopped reporting to WSPRNET. Operator error(s)? dave k2lyv

Re: [wsjt-devel] test feedback

On 08/06/2015 21:24, David Birnbaum wrote: Hi Dave, > Built r5548 and tested with both WSPR and JT modes. works fine with > JT65 and JT9. WSPR receives/decodes okay but wont transmit. >>Were you using a single band or band hopping? What Pct Tx were you using I used band hopping.

Re: [wsjt-devel] Successful compile on Debian/ARM but a couple issues

Hey Greg, Though slightly older versions at the moment, Richard Shaw has had WSJTX RPMs available for Fedora for some time: https://copr.fedoraproject.org/coprs/hobbes1069/WSJT/builds/ --David KI6ZHD On 10/22/2015 05:59 PM, KI7MT wrote: > This is what I have collected for package li

[wsjt-devel] OS X builds?

get onto JTMSK! Thanks and 73 de K4DET -- David Tiller Lead Consultant/Architect | CapTech (804) 304-0638 | dtil...@captechconsulting.com<mailto:dtil...@captechconsulting.com> -- _

Re: [wsjt-devel] OS X builds?

ut the 'port install asciidoc' installs 'asciidoc'. A simple symbolic link in /opt/local/bin fixes that. Thanks again - I'll give it a proper thrashing and report my findings. -- David Tiller Sr. Architect/Lead Consultant | CapTech (804) 304-0638 | dtil...@captechconsulti

[wsjt-devel] Runtime error running 1.7.0-devel r6353

g/starting wsjt-x 'fixed' it. Unfortunately I don't remember the exact sequence of events that caused the popup. If that's not one of the valid tags I should be be building against as warned against by Joe, please let me know what tag I should b

Re: [wsjt-devel] Runtime error running 1.7.0-devel r6353

gt; >> On 10/01/2016 13:00, David Tiller wrote: >> At line 155 of file wsjt-x/src/lib/deep4.f90 (unit = 77) >> Fortran runtime error: cannot open file 'fort.77': Permission denied >> >> The decode button stayed blue, but stopping/starting wsjt-x 'fixed&

[wsjt-devel] 'Save' feature request

ve all the audio of every QSO I make automagically. Thanks! -- David Tiller Sr. Architect/Lead Consultant | CapTech (804) 304-0638 | dtil...@captechconsulting.com<mailto:dtil...@captechconsulting.com> --

Re: [wsjt-devel] Raspberry Pi

All, I agree completely with Edson's command-line proposal. Not only would it open up new use cases (recording traffic heard for propagation studies, etc), it may also help with fine-grained functional and performance testing. -- David Tiller Sr. Architect/Lead Consultant | CapTech (804

Re: [wsjt-devel] WAV files not compatible

For what it's worth, both files play properly and I get the following metadata on both files under OS X 10.10.4 http://imgur.com/N9PbAFg Perhaps the odd 12,000 sample/s rate is hosing it up? -- David Tiller Lead Consultant/Architect | CapTech (804) 304-0638 | dtil...@captechconsultin

[wsjt-devel] Question re: Windows development scripts

I've installed the JTSDK-PY package, but when I go to do a build I get a message about python3.dll is missing. It's there in the DLL subdirectory of python. Anybody else have this problem or is due to some other Python distribution on my computer? I'm running Windows 8.1 64 bit. db P.S. I've tr

Re: [wsjt-devel] Another Compound Callsign Problem

Interesting. I just worked 4O4A on 80m FT8 and it proceeded perfectly. I'm using 1.8 final. -- David Tiller Sr. Architect/Lead Consultant | CapTech (804) 304-0638 | dtil...@captechconsulting.com<mailto:dtil...@captechconsulting.com> On Dec 4, 2017, at 9:04 PM, Morris Wideman via

Re: [wsjt-devel] wspr transmit periods random

ansmitting) and activate the Enable Tx button." It's the average percentage. The TXing is randomized to prevent two or more stations from always QRMing each other if they choose the same TX offset and schedule. -- David Tiller | Senior Manager dtil...@captechconsulting.co

Re: [wsjt-devel] dual transmit

x27;t on my end). -- David Tiller | Senior Manager dtil...@captechconsulting.com c 804.304.0638 / o 804.355.0511 [http://www.captechconsulting.com/siggen/logo.png]<http://www.captechconsulting.com/> [http://www.captechconsulting.com/siggen/Dkblue_Facebook.png]<http://www.facebook.co

Re: [wsjt-devel] dual transmit

Mike, I see this sort of overmodulation all the time. In fact I can hear it most of the time (it sounds nasty) even when there are 20 or so signals. Note that the harmonics are at n-times the frequency of the fundamental, and they're n-times wider. This is the result of the modulating audio sig

Re: [wsjt-devel] NA VHF Contest mode

Just a thought, but maybe the devs could only enable that checkbox and functionality if the user's grid is outside the "antipodal region" where NA calls are mapped. > On Dec 19, 2017, at 20:53, Peter Sumner wrote: > > Hi Dev team, >since the inclusion of "NA VHF Contest mode" in WSJT a lo

[wsjt-devel] question and/or feature request

. 73, David K6DAJ -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt-devel mailing list

Re: [wsjt-devel] PSK Reporter ANTENNA

Interestingly there's an article in the Feb QST about this very subject written by Steve Ford, WB8IMY. The article's title? "Antenna Reporting with WSJT-X". If you're a member you can access the article online. From: Gary McDuffie Sent: Thursday, January 25, 2

Re: [wsjt-devel] question and/or feature request

anything but your local time zone. > > Jim > AD0YO > >> On Thu, Jan 25, 2018 at 12:20 AM Georg wrote: >> David, >> >> It does not matter what time zone you are in. My Mac is set to UTC +1. As >> long as the seconds are OK you are fine. >> >&

Re: [wsjt-devel] FT8 DXpedition Mode

Joe et. Al. Your “how to” write-up is great. Are you ready to tell us some details about how it works internally and how it is different from conventional FT8? Dave / NX6D From: Joe Taylor Sent: Friday, February 2, 2018 09:56 To: wsjt-devel@lists.sourceforge.net

[wsjt-devel] WSJT-X support for new Flex 6400 & 6600?

Hi all, First, thank you for all the work on WSJT-X. WSJT-X 1.80’s Hamlib version does not have support for the new Flex Radio 6400 or 6600 either by IP or serial (Kenwood TS-2000). December 24th I compiled Hamlib from the Github source with the changes to flex.c and kenwood.c to add the new m

Re: [wsjt-devel] Flex Radio 6400/6600 support in WSJT-X needs Hamlib updating

@lists.sourceforge.net Subject: Re: [wsjt-devel] Flex Radio 6400/6600 support in WSJT-X needs Hamlib updating On 04/02/2018 06:26, David De Coons wrote: > Hi all > > Sending second posting since first one was sent too soon after subscribing. > > Thank you for the work put into WSJX-X. Exce

Re: [wsjt-devel] Diversity Reception

Flex Radios definitely support diversity reception. The 6600, 6600M and 6700 have the necessary dual receivers. In conventional use, we expect the user to route one signal to one ear (via stereo headphones), and the other signal to the other ear. It would be common for phase and timing diff

Re: [wsjt-devel] Space pad for readability

That would be VERY useful. I hope you can get it into the code. Does it involve changes to JTAlertX? Dave / NX6D From: Black Michael via wsjt-devel Sent: Wednesday, February 28, 2018 9:00:29 AM To: wsjt-devel@lists.sourceforge.net Cc: Black Michael Subject: Re

Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7

I’m curious to know what will happen when someone wanders into these tests, without RC2, and tries to send one of the messages not used in these abbreviated sequences. Will those callers be ignored? Dave / NX6D From: Joe Taylor Sent: Sunday, March 4, 201

Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7

-- From: Joe Taylor [mailto:j...@princeton.edu] Sent: Monday, March 5, 2018 2:02 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7 On 3/4/2018 8:12 PM, David Fisher NX6D wrote: > I’m curious to know what will happen when someone wander

Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7

probably not. That's precisely why we are doing more testing! -- 73, Joe, K1JT On 3/5/2018 3:33 PM, David Fisher wrote: > Jim has made the point I was heading towards. Even when 1.9 is released > publically, there will be plenty of users of older versions and some >

[wsjt-devel] FT8 DXPedition mode test

Do you guys want reports of odd things seen during the DXPedition test today on this list? Dave / NX6D -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.lin

[wsjt-devel] DXPedition test results

Joe and everyone: Thanks for the summary of what worked and didn’t last night. The bug in the RR73 logic explains a lot. Here are a few things I noticed: Apart from our friend in Mexico, who simply made a mistake, I noticed a few other instances of people transmitting on top of the Fox’s tran

Re: [wsjt-devel] Frequency Labels Suggestion

mode. How about a separate list for normal ops vs fox/hound ops? David Tiller | Senior Manager dtil...@captechconsulting.com c 804.304.0638 / o 804.355.0511 [http://www.captechconsulting.com/siggen/logo.png]<http://www.captechconsulting.com/> [http://www.captechconsulting.com/siggen

Re: [wsjt-devel] More on Difficulties to get WSJT-X to accept UDP type 4 message from server

In addition to what Laurie said, this part of your reply looks like ASCII where the QTime field should be: 4c4f47474552 "adbccbda000200040006 ---> 4c4f47474552 = LOGGER 0451ba68ffef3fd9a6a700017e000f4b31564b20463642484b204a4e32340000" --

  1   2   3   4   5   6   >