Try running this simple web app from your browser,
you will know right away whether your computers clock is synced to UTC.
https://time.is/
Dave - wb9own
On Tuesday, December 5, 2023 at 08:17:28 AM CST, robert evans LAST_NAME
via wsjt-devel wrote:
All good suggestions. Thank You.
Bob,
My linux system, Kubuntu 22.04 has been handling my FT991a just fine, the usb
drivers were probably in the distribution. It sees the rig just fine over the
single usb cable and is using the on-board sound card.
I never needed to download them at all. I did have trouble with a previous
Thanks Kari, oh2gqc for that kb9rlw video.
$ sudo adduser 'user' dialout
&
Thanks Fred N2XK.
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
On 12/6/23 21:16, robert evans LAST_NAME via wsjt-devel wrote:
I wonder if Icom and Yeasu will offer usb drivers
for linux soon.
For IC705 you do not need special USB drivers under Linux.
Just plug in your USB cable, add your username to the 'dialout' group
and off you go.
See this
Linux doesn’t need any drivers added. It comes with Silicon Labs USB to UART
drivers already in the OS. All you have to do is add your username to the
dialout group.
Matter of fact there is no need to install manufacturers drivers in Windows
because all they are is old versions of Silicon Labs
An update of my windows IC-705 testing ...
The asus win11 i9 laptop / WSJT-X 2.7.0-rc2 / IC-705
still was NOT decoding.
Everything, including rig control, was working fine.
(BTW this IC-705 firmware ver has a FT8 preset.)
Installed fldigi 4.2.? that i use for nbems traffic nets
for thor22 msfk
All good suggestions. Thank You.
Last night..
Double checked everything on the old dell i3 win10
and it started decoding just fine.
The thing is, that it is so slow, i loose track of what
i did and didn't do when i make changes.
And it takes forever to reboot.
I keep it around because it
OM,
Also make sure that you are not in "Hound" mode with the "Rx All Freqs"
unchecked.
73's de Kari, oh2gqc
On 12/4/23 20:57, robert evans LAST_NAME via wsjt-devel wrote:
Using a IC-705 over the weekend and after
installing the usb drivers in a asus win11
i9 laptop i started WSJT-X
Could there be some audio enhancements that should be switched off, either
windows or in rig such as noise blanker or some automatic interference
reduction?
Does your computer have two time services activated, perhaps not in the both
computers?
On those few decodes, what are the dT values?
Is the IC-705 in Lower Side band mode or A data mode that is inverted?
On 12/4/2023 12:57 PM, robert evans LAST_NAME via wsjt-devel wrote:
Using a IC-705 over the weekend and after
installing the usb drivers in a asus win11
i9 laptop i started WSJT-X 2.7.0-rc2.
The rig control worked fine
you have the Wide Graph opened out? you will only decode what you see on
the wide graph yes?
Alan
On Tue, 5 Dec 2023 at 05:57, robert evans LAST_NAME via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Using a IC-705 over the weekend and after
> installing the usb drivers in a asus win11
And your clock is dead nuts ?
Ron WV4P
On Mon, Dec 4, 2023 at 4:00 PM robert evans LAST_NAME via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Using a IC-705 over the weekend and after
> installing the usb drivers in a asus win11
> i9 laptop i started WSJT-X 2.7.0-rc2.
>
> The rig
Check your time
http://time.is
Mike W9MDB
On Monday, December 4, 2023 at 03:57:05 PM CST, robert evans LAST_NAME via
wsjt-devel wrote:
Using a IC-705 over the weekend and after
installing the usb drivers in a asus win11
i9 laptop i started WSJT-X 2.7.0-rc2.
The rig
Using a IC-705 over the weekend and after
installing the usb drivers in a asus win11
i9 laptop i started WSJT-X 2.7.0-rc2.
The rig control worked fine and the signals
where being displayed in the spect graph,
but no decodes. Double checked the time set.
Still no decodes.
Walked away for many
14 matches
Mail list logo
