On 05/07/2017 12:25, Neil Zampella wrote:
Bill ... thanks for your pointers.
However, think about this for the future. If I switch to a new
configuration that is using a different mode, I shouldn't need to have
a setting checked for the configuration to reset the frequency to the
mode
[mailto:ne...@techie.com]
Sent: Tuesday, July 04, 2017 4:08 PM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] Frequency doesn't shift when changing
configurations
Urp .. sent this reply directly to Bill .. so I'm including that here, along
with this up
4, 2017 4:08 PM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] Frequency doesn't shift when changing
configurations
Urp .. sent this reply directly to Bill .. so I'm including that here, along
with this update below:
On 7/4/2017 4:16 PM, Neil Zamp
Urp .. sent this reply directly to Bill .. so I'm including that here,
along with this update below:
On 7/4/2017 4:16 PM, Neil Zampella wrote:
On 7/4/2017 2:07 PM, Bill Somerville wrote:
On 04/07/2017 18:52, Neil Zampella wrote:
OK .. Scenario I often use is this; I'm monitoring JT65/JT9
On 04/07/2017 18:52, Neil Zampella wrote:
OK .. Scenario I often use is this; I'm monitoring JT65/JT9 on 20M,
I want to switch over to FT8 to see what is happening so I change
config. I'm thinking that the program on restart should check the
band and/or mode to verify the freq setting.
On 7/4/2017 1:17 PM, Bill Somerville wrote:
On 04/07/2017 15:21, Neil Zampella wrote:
Hi Neil,
I forgot to mention that the two options in WSJT-X
"Settings->General" "Monitor off at startup" and "Monitor returns to
last used frequency" control what happens when you start WSJT-X.
Switching
Bill, Neil,
That works for me now with r7782.
Dan – K4SHQ
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Tuesday, July 04, 2017 12:17 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Frequency doesn't shift when changing configurations
On 04/07/2017 15:21
On 04/07/2017 15:21, Neil Zampella wrote:
Hi Neil,
I forgot to mention that the two options in WSJT-X
"Settings->General" "Monitor off at startup" and "Monitor returns to
last used frequency" control what happens when you start WSJT-X.
Switching configurations is equivalent to starting
Somerville [mailto:g4...@classdesign.com]
Sent: Tuesday, July 04, 2017 4:08 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Frequency doesn't shift when changing
configurations
On 04/07/2017 03:08, Neil Zampella wrote:
> Switching configurations from what I have setup for FT8 to t
On 7/4/2017 5:07 AM, Bill Somerville wrote:
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only
Hi Bill,
See below ..
On 7/4/2017 5:05 AM, Bill Somerville wrote:
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only way to reset the frequency is to either
On 04/07/2017 03:08, Neil Zampella wrote:
Switching configurations from what I have setup for FT8 to the
'normal' JT65/JT9 setup, the frequency does not move from the FT8 to
the JT modes frequency. This also occurs going the other way. The
only way to reset the frequency is to either
On 04/07/2017 04:05, Jordan Sherer wrote:
I've reproduced this partly on my IC-706MKIIG using r going from
JT to FT modes on 20m. CAT control works perfectly in JT mode. In
switching to FT, the software does not move to the correct frequency.
It also does not let me open the drop down to
I've reproduced this partly on my IC-706MKIIG using r going from JT to FT
modes on 20m. CAT control works perfectly in JT mode. In switching to FT, the
software does not move to the correct frequency. It also does not let me open
the drop down to switch bands until I switch back to JT mode.
15 matches
Mail list logo
