Hi George,

On Wed, 5 Sep 2007 19:10:48 +0530
"george elefter" <[EMAIL PROTECTED]> wrote:

> Hello Everyone.
> 
> I have installed sequoia controller in two machine's.  Controllers
> were started separately.  Though the console I could not able to see
> the other controller. Following is the network settings.
> 
> 1. Hostname is translated to the real IP address of the controller
> node. This is verified by ping the hostname. And its resolved to real
> ip address also as per the document given by you.
> 
> 2. I have configured *Ethernet Bonding for eth0 and eth1 to achieve
> *redundancy for our network. Bond0 is local ip(172.20.100.85) and
> Bond0:0 in public ip and default route is defined in local ip as
> 172.20.0.1

What mode of bonding are you using?

Multicast and bonding are not out of the box working, you must add a
route as followings for the multicast addresses (which you can find in
the appia.xml i believe)


route add -host 224.1.1.5 dev bond0
route add -host 224.2.2.5 dev bond0

to verify

tcpdump -i bond0 host 224.1.1.5


> 
> I am using  hederaPropertiesFile="/hedera_appia.properties" in
> virtualdatabase xml file for group communication. Controller1 is not
> communicating to contrller2 and I am strucked up. Could someone help
> me please.
> 
> Thanks in Advance.
> 
> Elefter


-- 
Stuart James
Senior Systems Administrator
PayPoint Internet Payment Services
203 High Street, Tonbridge TN9 1BW, UK
Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773 


SECPay Ltd registered offices. 1 The Boulevard, Shire Park, Welwyn
Garden City, Hertfordshire, AL7 1EL

This e-mail message is confidential and for use by the addressee only.
If the message is received by anyone other than the addressee, please
return the message to the sender by replying to it and then delete the
message from your computer. Internet e-mails are not necessarily
secure. SECPay Ltd does not accept responsibility for changes made to
this message after it was sent. Whilst all reasonable care has been
taken to avoid the transmission of viruses, it is the responsibility of
the recipient to ensure that the onward transmission, opening or use of
this message and any attachments will not adversely affect its systems
or data. No responsibility is accepted by SECPay Ltd in this regard and
the recipient should carry out such virus and other checks as it
considers appropriate.
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia

Reply via email to