This is done, any other idea ?
Stuart James a écrit :
Hi,
Depending on your switch, you may have to specifically enable
multicast.
Regards,
On Tue, 11 Sep 2007 09:54:15 +0200
Gérard BUNEL <[EMAIL PROTECTED]> wrote:
I'm facing exactly the same problem, did tou find a solution ?
As you did, I've added a route but that didn't solve the problem
Gerard
George Elefter a écrit :
Hi Stuart,
Thanks for your helping. I am using mode=1 (active-backup) in
Ethernet Bonding configuration. But I have two ip address one is
Public IP (Bond0:0) and another one is Local IP (Bond0).
I have added the route as you mention below
route add -host 224.1.1.5 dev bond0
while checking tcpdump -i bond0 host 224.1.1.5 its going to Public
IP. Still the both controllers are not communicating. How I can
change the group communication to local IP or any other way to
solve this problem.
Thanks in Advance.
George Elefter
On 9/5/07, Stuart James <[EMAIL PROTECTED]> wrote:
Hi George,
On Wed, 5 Sep 2007 19:10:48 +0530
"george elefter" <[EMAIL PROTECTED]> wrote:
Hello Everyone.
I have installed sequoia controller in two machine's. Controllers
were started separately. Though the console I could not able to
see the other controller. Following is the network settings.
1. Hostname is translated to the real IP address of the controller
node. This is verified by ping the hostname. And its resolved to
real ip address also as per the document given by you.
2. I have configured *Ethernet Bonding for eth0 and eth1 to
achieve *redundancy for our network. Bond0 is local
ip(172.20.100.85) and Bond0:0 in public ip and default route is
defined in local ip as 172.20.0.1
What mode of bonding are you using?
Multicast and bonding are not out of the box working, you must add
a route as followings for the multicast addresses (which you can
find in the appia.xml i believe)
route add -host 224.1.1.5 dev bond0
route add -host 224.2.2.5 dev bond0
to verify
tcpdump -i bond0 host 224.1.1.5
I am using hederaPropertiesFile="/hedera_appia.properties" in
virtualdatabase xml file for group communication. Controller1 is
not communicating to contrller2 and I am strucked up. Could
someone help me please.
Thanks in Advance.
Elefter
--
Stuart James
Senior Systems Administrator
PayPoint Internet Payment Services
203 High Street, Tonbridge TN9 1BW, UK
Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773
SECPay Ltd registered offices. 1 The Boulevard, Shire Park, Welwyn
Garden City, Hertfordshire, AL7 1EL
This e-mail message is confidential and for use by the addressee
only. If the message is received by anyone other than the
addressee, please return the message to the sender by replying to
it and then delete the message from your computer. Internet
e-mails are not necessarily secure. SECPay Ltd does not accept
responsibility for changes made to this message after it was sent.
Whilst all reasonable care has been taken to avoid the
transmission of viruses, it is the responsibility of the recipient
to ensure that the onward transmission, opening or use of this
message and any attachments will not adversely affect its systems
or data. No responsibility is accepted by SECPay Ltd in this
regard and the recipient should carry out such virus and other
checks as it considers appropriate.
_______________________________________________ Sequoia mailing
list [email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
------------------------------------------------------------------------
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
--
*Gérard BUNEL
*Chef de Projet
____________________________________________________________________
Technopôle Brest Iroise
Site du Vernis – CS 23866
29238 Brest Cedex 3
Tél : + 33 2 98 05 43 21
Fax : + 33 2 98 05 20 34
www.altran.com <http://www.altran.com>
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
