Hi,
On Tue, 11 Sep 2007 10:38:05 +0200 Gérard BUNEL <[EMAIL PROTECTED]> wrote: > This is done, any other idea ? Do you see any packets for the multicast IP address arriving on the second controller, do a tcpdump on the interface you expect to see the traffic on. Are there any firewall rules that maybe preventing the packets from being received? > > Stuart James a écrit : > > Hi, > > > > Depending on your switch, you may have to specifically enable > > multicast. > > > > Regards, > > > > > > > > On Tue, 11 Sep 2007 09:54:15 +0200 > > Gérard BUNEL <[EMAIL PROTECTED]> wrote: > > > > > >> I'm facing exactly the same problem, did tou find a solution ? > >> As you did, I've added a route but that didn't solve the problem > >> Gerard > >> > >> George Elefter a écrit : > >> > >>> Hi Stuart, > >>> > >>> Thanks for your helping. I am using mode=1 (active-backup) in > >>> Ethernet Bonding configuration. But I have two ip address one is > >>> Public IP (Bond0:0) and another one is Local IP (Bond0). > >>> > >>> I have added the route as you mention below > >>> > >>> route add -host 224.1.1.5 dev bond0 > >>> > >>> while checking tcpdump -i bond0 host 224.1.1.5 its going to Public > >>> IP. Still the both controllers are not communicating. How I can > >>> change the group communication to local IP or any other way to > >>> solve this problem. > >>> > >>> Thanks in Advance. > >>> > >>> George Elefter > >>> > >>> On 9/5/07, Stuart James <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>>> Hi George, > >>>> > >>>> On Wed, 5 Sep 2007 19:10:48 +0530 > >>>> "george elefter" <[EMAIL PROTECTED]> wrote: > >>>> > >>>> > >>>> > >>>>> Hello Everyone. > >>>>> > >>>>> I have installed sequoia controller in two machine's. > >>>>> Controllers were started separately. Though the console I > >>>>> could not able to see the other controller. Following is the > >>>>> network settings. > >>>>> > >>>>> 1. Hostname is translated to the real IP address of the > >>>>> controller node. This is verified by ping the hostname. And its > >>>>> resolved to real ip address also as per the document given by > >>>>> you. > >>>>> > >>>>> 2. I have configured *Ethernet Bonding for eth0 and eth1 to > >>>>> achieve *redundancy for our network. Bond0 is local > >>>>> ip(172.20.100.85) and Bond0:0 in public ip and default route is > >>>>> defined in local ip as 172.20.0.1 > >>>>> > >>>>> > >>>> What mode of bonding are you using? > >>>> > >>>> Multicast and bonding are not out of the box working, you must > >>>> add a route as followings for the multicast addresses (which you > >>>> can find in the appia.xml i believe) > >>>> > >>>> > >>>> route add -host 224.1.1.5 dev bond0 > >>>> route add -host 224.2.2.5 dev bond0 > >>>> > >>>> to verify > >>>> > >>>> tcpdump -i bond0 host 224.1.1.5 > >>>> > >>>> > >>>> > >>>> > >>>>> I am using hederaPropertiesFile="/hedera_appia.properties" in > >>>>> virtualdatabase xml file for group communication. Controller1 is > >>>>> not communicating to contrller2 and I am strucked up. Could > >>>>> someone help me please. > >>>>> > >>>>> Thanks in Advance. > >>>>> > >>>>> Elefter > >>>>> > >>>>> > >>>> -- > >>>> Stuart James > >>>> Senior Systems Administrator > >>>> PayPoint Internet Payment Services > >>>> 203 High Street, Tonbridge TN9 1BW, UK > >>>> Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773 > >>>> > >>>> > >>>> SECPay Ltd registered offices. 1 The Boulevard, Shire Park, > >>>> Welwyn Garden City, Hertfordshire, AL7 1EL > >>>> > >>>> This e-mail message is confidential and for use by the addressee > >>>> only. If the message is received by anyone other than the > >>>> addressee, please return the message to the sender by replying to > >>>> it and then delete the message from your computer. Internet > >>>> e-mails are not necessarily secure. SECPay Ltd does not accept > >>>> responsibility for changes made to this message after it was > >>>> sent. Whilst all reasonable care has been taken to avoid the > >>>> transmission of viruses, it is the responsibility of the > >>>> recipient to ensure that the onward transmission, opening or use > >>>> of this message and any attachments will not adversely affect > >>>> its systems or data. No responsibility is accepted by SECPay Ltd > >>>> in this regard and the recipient should carry out such virus and > >>>> other checks as it considers appropriate. > >>>> _______________________________________________ Sequoia mailing > >>>> list [email protected] > >>>> https://forge.continuent.org/mailman/listinfo/sequoia > >>>> > >>>> > >>>> > >>> > >>> ------------------------------------------------------------------------ > >>> > >>> _______________________________________________ > >>> Sequoia mailing list > >>> [email protected] > >>> https://forge.continuent.org/mailman/listinfo/sequoia > >>> > >> > > > > > > > > -- Stuart James Senior Systems Administrator PayPoint Internet Payment Services 203 High Street, Tonbridge TN9 1BW, UK Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773 SECPay Ltd registered offices. 1 The Boulevard, Shire Park, Welwyn Garden City, Hertfordshire, AL7 1EL This e-mail message is confidential and for use by the addressee only. If the message is received by anyone other than the addressee, please return the message to the sender by replying to it and then delete the message from your computer. Internet e-mails are not necessarily secure. SECPay Ltd does not accept responsibility for changes made to this message after it was sent. Whilst all reasonable care has been taken to avoid the transmission of viruses, it is the responsibility of the recipient to ensure that the onward transmission, opening or use of this message and any attachments will not adversely affect its systems or data. No responsibility is accepted by SECPay Ltd in this regard and the recipient should carry out such virus and other checks as it considers appropriate. _______________________________________________ Sequoia mailing list [email protected] https://forge.continuent.org/mailman/listinfo/sequoia
