Ooops, Not exactly. It worked the first time
Now, even if I re-initialize all (droip recovery database, ...),
controllers can't see each other
Gérard BUNEL a écrit :
FYI: The problem is fixed by upgrading to sequoia 2.10.9
Now I've a new problem, when I try to restore a backend, I've the
followin error
MATISSEDB(admin) > restore backend sd11 sd01init
Backend login for restore process > mat_user
Backend password for restore process >
Restoring backend sd11 with dump sd01init
java.io.IOException: mysqladmin: not found
Stuart James a écrit :
Hi,
On Tue, 11 Sep 2007 10:38:05 +0200
Gérard BUNEL <[EMAIL PROTECTED]> wrote:
This is done, any other idea ?
Do you see any packets for the multicast IP address arriving on the
second controller, do a tcpdump on the interface you expect to see the
traffic on. Are there any firewall rules that maybe preventing the
packets from being received?
Stuart James a écrit :
Hi,
Depending on your switch, you may have to specifically enable
multicast.
Regards,
On Tue, 11 Sep 2007 09:54:15 +0200
Gérard BUNEL <[EMAIL PROTECTED]> wrote:
I'm facing exactly the same problem, did tou find a solution ?
As you did, I've added a route but that didn't solve the problem
Gerard
George Elefter a écrit :
Hi Stuart,
Thanks for your helping. I am using mode=1 (active-backup) in
Ethernet Bonding configuration. But I have two ip address one is
Public IP (Bond0:0) and another one is Local IP (Bond0).
I have added the route as you mention below
route add -host 224.1.1.5 dev bond0
while checking tcpdump -i bond0 host 224.1.1.5 its going to Public
IP. Still the both controllers are not communicating. How I can
change the group communication to local IP or any other way to
solve this problem.
Thanks in Advance.
George Elefter
On 9/5/07, Stuart James <[EMAIL PROTECTED]> wrote:
Hi George,
On Wed, 5 Sep 2007 19:10:48 +0530
"george elefter" <[EMAIL PROTECTED]> wrote:
Hello Everyone.
I have installed sequoia controller in two machine's.
Controllers were started separately. Though the console I
could not able to see the other controller. Following is the
network settings.
1. Hostname is translated to the real IP address of the
controller node. This is verified by ping the hostname. And its
resolved to real ip address also as per the document given by
you.
2. I have configured *Ethernet Bonding for eth0 and eth1 to
achieve *redundancy for our network. Bond0 is local
ip(172.20.100.85) and Bond0:0 in public ip and default route is
defined in local ip as 172.20.0.1
What mode of bonding are you using?
Multicast and bonding are not out of the box working, you must
add a route as followings for the multicast addresses (which you
can find in the appia.xml i believe)
route add -host 224.1.1.5 dev bond0
route add -host 224.2.2.5 dev bond0
to verify
tcpdump -i bond0 host 224.1.1.5
I am using hederaPropertiesFile="/hedera_appia.properties" in
virtualdatabase xml file for group communication. Controller1 is
not communicating to contrller2 and I am strucked up. Could
someone help me please.
Thanks in Advance.
Elefter
--
Stuart James
Senior Systems Administrator
PayPoint Internet Payment Services
203 High Street, Tonbridge TN9 1BW, UK
Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773
SECPay Ltd registered offices. 1 The Boulevard, Shire Park,
Welwyn Garden City, Hertfordshire, AL7 1EL
This e-mail message is confidential and for use by the addressee
only. If the message is received by anyone other than the
addressee, please return the message to the sender by replying to
it and then delete the message from your computer. Internet
e-mails are not necessarily secure. SECPay Ltd does not accept
responsibility for changes made to this message after it was
sent. Whilst all reasonable care has been taken to avoid the
transmission of viruses, it is the responsibility of the
recipient to ensure that the onward transmission, opening or use
of this message and any attachments will not adversely affect
its systems or data. No responsibility is accepted by SECPay Ltd
in this regard and the recipient should carry out such virus and
other checks as it considers appropriate.
_______________________________________________ Sequoia mailing
list [email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
------------------------------------------------------------------------
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
------------------------------------------------------------------------
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
--
*Gérard BUNEL
*Chef de Projet
____________________________________________________________________
Technopôle Brest Iroise
Site du Vernis – CS 23866
29238 Brest Cedex 3
Tél : + 33 2 98 05 43 21
Fax : + 33 2 98 05 20 34
www.altran.com <http://www.altran.com>
_______________________________________________
Sequoia mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/sequoia
