Hi Looks like an auth problem to your mysql-db with the dump configurations. Can you paste your virtual_db.xml where the dump is configured?
stefan Gérard BUNEL wrote: > FYI: The problem is fixed by upgrading to sequoia 2.10.9 > Now I've a new problem, when I try to restore a backend, I've the > followin error > > MATISSEDB(admin) > restore backend sd11 sd01init > Backend login for restore process > mat_user > Backend password for restore process > > Restoring backend sd11 with dump sd01init > java.io.IOException: mysqladmin: not found > > Stuart James a écrit : >> Hi, >> >> >> On Tue, 11 Sep 2007 10:38:05 +0200 >> Gérard BUNEL <[EMAIL PROTECTED]> wrote: >> >> >>> This is done, any other idea ? >>> >> >> Do you see any packets for the multicast IP address arriving on the >> second controller, do a tcpdump on the interface you expect to see the >> traffic on. Are there any firewall rules that maybe preventing the >> packets from being received? >> >> >> >> >>> Stuart James a écrit : >>> >>>> Hi, >>>> >>>> Depending on your switch, you may have to specifically enable >>>> multicast. >>>> Regards, >>>> >>>> >>>> >>>> On Tue, 11 Sep 2007 09:54:15 +0200 >>>> Gérard BUNEL <[EMAIL PROTECTED]> wrote: >>>> >>>> >>>>> I'm facing exactly the same problem, did tou find a solution ? >>>>> As you did, I've added a route but that didn't solve the problem >>>>> Gerard >>>>> >>>>> George Elefter a écrit : >>>>> >>>>>> Hi Stuart, >>>>>> >>>>>> Thanks for your helping. I am using mode=1 (active-backup) in >>>>>> Ethernet Bonding configuration. But I have two ip address one is >>>>>> Public IP (Bond0:0) and another one is Local IP (Bond0). >>>>>> >>>>>> I have added the route as you mention below >>>>>> >>>>>> route add -host 224.1.1.5 dev bond0 >>>>>> >>>>>> while checking tcpdump -i bond0 host 224.1.1.5 its going to Public >>>>>> IP. Still the both controllers are not communicating. How I can >>>>>> change the group communication to local IP or any other way to >>>>>> solve this problem. >>>>>> >>>>>> Thanks in Advance. >>>>>> >>>>>> George Elefter >>>>>> >>>>>> On 9/5/07, Stuart James <[EMAIL PROTECTED]> wrote: >>>>>> >>>>>>> Hi George, >>>>>>> >>>>>>> On Wed, 5 Sep 2007 19:10:48 +0530 >>>>>>> "george elefter" <[EMAIL PROTECTED]> wrote: >>>>>>> >>>>>>> >>>>>>>> Hello Everyone. >>>>>>>> >>>>>>>> I have installed sequoia controller in two machine's. >>>>>>>> Controllers were started separately. Though the console I >>>>>>>> could not able to see the other controller. Following is the >>>>>>>> network settings. >>>>>>>> >>>>>>>> 1. Hostname is translated to the real IP address of the >>>>>>>> controller node. This is verified by ping the hostname. And its >>>>>>>> resolved to real ip address also as per the document given by >>>>>>>> you. >>>>>>>> >>>>>>>> 2. I have configured *Ethernet Bonding for eth0 and eth1 to >>>>>>>> achieve *redundancy for our network. Bond0 is local >>>>>>>> ip(172.20.100.85) and Bond0:0 in public ip and default route is >>>>>>>> defined in local ip as 172.20.0.1 >>>>>>>> >>>>>>> What mode of bonding are you using? >>>>>>> >>>>>>> Multicast and bonding are not out of the box working, you must >>>>>>> add a route as followings for the multicast addresses (which you >>>>>>> can find in the appia.xml i believe) >>>>>>> >>>>>>> >>>>>>> route add -host 224.1.1.5 dev bond0 >>>>>>> route add -host 224.2.2.5 dev bond0 >>>>>>> >>>>>>> to verify >>>>>>> >>>>>>> tcpdump -i bond0 host 224.1.1.5 >>>>>>> >>>>>>> >>>>>>> >>>>>>>> I am using hederaPropertiesFile="/hedera_appia.properties" in >>>>>>>> virtualdatabase xml file for group communication. Controller1 is >>>>>>>> not communicating to contrller2 and I am strucked up. Could >>>>>>>> someone help me please. >>>>>>>> >>>>>>>> Thanks in Advance. >>>>>>>> >>>>>>>> Elefter >>>>>>>> >>>>>>> -- >>>>>>> Stuart James >>>>>>> Senior Systems Administrator >>>>>>> PayPoint Internet Payment Services >>>>>>> 203 High Street, Tonbridge TN9 1BW, UK >>>>>>> Direct: +44 (0)1732 300205 Mobile: +44 (0)7809 504773 >>>>>>> >>>>>>> >>>>>>> SECPay Ltd registered offices. 1 The Boulevard, Shire Park, >>>>>>> Welwyn Garden City, Hertfordshire, AL7 1EL >>>>>>> >>>>>>> This e-mail message is confidential and for use by the addressee >>>>>>> only. If the message is received by anyone other than the >>>>>>> addressee, please return the message to the sender by replying to >>>>>>> it and then delete the message from your computer. Internet >>>>>>> e-mails are not necessarily secure. SECPay Ltd does not accept >>>>>>> responsibility for changes made to this message after it was >>>>>>> sent. Whilst all reasonable care has been taken to avoid the >>>>>>> transmission of viruses, it is the responsibility of the >>>>>>> recipient to ensure that the onward transmission, opening or use >>>>>>> of this message and any attachments will not adversely affect >>>>>>> its systems or data. No responsibility is accepted by SECPay Ltd >>>>>>> in this regard and the recipient should carry out such virus and >>>>>>> other checks as it considers appropriate. >>>>>>> _______________________________________________ Sequoia mailing >>>>>>> list [email protected] >>>>>>> https://forge.continuent.org/mailman/listinfo/sequoia >>>>>>> >>>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------ >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Sequoia mailing list >>>>>> [email protected] >>>>>> https://forge.continuent.org/mailman/listinfo/sequoia >>>>>> >>>>> >>>> >>> >> >> >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Sequoia mailing list > [email protected] > https://forge.continuent.org/mailman/listinfo/sequoia
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ Sequoia mailing list [email protected] https://forge.continuent.org/mailman/listinfo/sequoia
