1st is the rotor turning when cranking? I assume so or the hep wouldn't work. Is the cap intact?
Is #3 firing only when it should, or is it firing in place of 1,2,4 also. (back to not turning rotor...) This could happen if you put the coil wire on #3 and the #3 on the coil post, but you can't do that with a normal 2.2 cap right? What happens if you put the timing light on the coil wire? ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Wednesday, October 21, 2009 8:39 PM Subject: SD> odd problem, running on 1 cyl, 88 Shelby Z > For some reason my 88 Shelby Z is only getting spark to cyl 3. Checked it > out, coil is only firing on number 3. Computer is only firing number 3. No > codes. Tried cap rotor and wires first, then put the timing light on coil > wire and saw that it is not giving spark. Gonna try a different > distributor next. Anyone have other ideas? Need this car fixed ASAP. > > > ? > > > Joey Dalton > > > Hillbilly Racing > > > ? > > > 86 Turbo Z C/S > > > 88 Shelby Z > > > 89 Daytona Shelby > > > 76 D100 > > > 79 D150 > > > 66 Coronet > > > 66 Charger > > > 66 Satellite > > > 73 Duster > > > ? > > > coming soon: 72 Duster dirt track racer.... > > ___________REMOVE-FOOTER-WHEN-REPLYING_________ > ShelbyDodge mailing list > [email protected] > http://www.imagilist.com/mailman/listinfo/shelbydodge ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
