>ICP and the transmission electron microscope don't lie...
>30VDC - Using three nine volt batteries and one liter of heated, super
>quality distilled water I easily get 22 PPM (drawing 12 mA). But my
>particle size is 0.0259 micron - not in ideal spec. It appears light
>yellow, but the size is still too big... I'm busy working on this right now
>to see if I can make yellow CS with particle size between 0.001 and 0.015
>micron. Has anyone made yellow CS with this particle size?
>Christian

   ALLRIGHT Christian!!! Now we finally have a way to find out what works
the best voltage-amps when it comes to partical size if Christian is
willing to do a few tests. 

   I used around 100 volts DC to make my CS and managed to get it tested
once and it tested .00?? at one time. Here's what I think will determin
the partical size. The distance between the wires, the amount of voltage,
and the milliamps.

   If your willing to do a few tests and the people are willing to
test the product I have a few ideas in mind for you to try. That should
lead us to an accurate way of producing CS  and a reliable device.

   Here's what I've gathered so far. Voltage is the speed of electrons,
amps is the amount of electrons and the distance between the wires it
the distance they have to travel. First thing to test is the distance.
Make one batch with the wires 1/2 inch apart and another with them 
1 inch or 3/4 or 1/4 either way or all of them. Test the partical size
and don't worry about the PPM.

    Next test voltage try 2 batterys, then one. Allways make the time 
exactly the same and allways wash the container then rinse TWICE with 
distilled water for each and every test. Even try 4-5 etc. batterys.

    Next heat one and do one without heat.


    If you can get me the results of those tests I should be able to figure
out a formula and a device so that we can make the  .00?? each and every
time.  If nothing else we'll get a better understanding of what is going
on when we make CS.

    Another thing that crosses my mind is who came up with the .001 partical
size is nessary to insure that we don't get algura? If it was true and from
what Christian just wrote then there sould be alot of blue smerf looking
people running around now. Myself included!


Take Care 

Reid



--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the subject: line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>