Greg Ball wrote: > I did measure it with the tester V just recommended in his post. > http://www.sunstoneherbals.com/tds3.htmI actually have that one. The > longer I would go with my silver, the more yellow it gets. Also, The > black debris on the silver wire would get really thick and crusty. If > I stopped the process to clean the wire - and then started again, the > silver would get dark or very yellow. I couldn't get it past 2-3 ppm > with clear water. I don't want the yellow silver as I am aware that > represents clumping.
Sounds like any of the following: 1. Your water is not pure enough 2. You are not limiting to 1 mA per square inch of anode area 3. You are not stirring rapid enough. A light yellow is fine, but you do not want a strong yellow or dark color. Marshall
