I get mine up to around 40 sometimes with the tester...is that bad?...deb
Marshall Dudley <[email protected]> wrote: Greg Ball wrote: I did
measure it with the tester V just recommended in his post.
http://www.sunstoneherbals.com/tds3.htmI actually have that one. The longer I
would go with my silver, the more yellow it gets. Also, The black debris on the
silver wire would get really thick and crusty. If I stopped the process to
clean the wire - and then started again, the silver would get dark or very
yellow. I couldn't get it past 2-3 ppm with clear water. I don't want the
yellow silver as I am aware that represents clumping.Sounds like any of the
following: 1. Your water is not pure enough
2. You are not limiting to 1 mA per square inch of anode area
3. You are not stirring rapid enough. A light yellow is fine, but you do not
want a strong yellow or dark color. Marshall
