Yeah I have fonud that the yellow comes easily when you dont use a bubbler. Whenever I use a bubbler then I get perfectly clear CS and it usually reads about 25 ppm with the TDS tester. So get an aqairium bubbler and try making some with that runnnig in there and you get much better results.
Take care, V > I did measure it with the tester V just recommended in his post. > http://www.sunstoneherbals.com/tds3.htm<http://www.sunstoneherbals.com/tds3.htm> > I actually have that one. The longer I would go with my silver, the more > yellow it gets. Also, The black debris on the silver wire would get > really thick and crusty. If I stopped the process to clean the wire - and > then started again, the silver would get dark or very yellow. I couldn't > get it past 2-3 ppm with clear water. I don't want the yellow silver as I am > aware that represents clumping. > ----- Original Message ----- > From: Robert Berger<mailto:[email protected]> > To: [email protected]<mailto:[email protected]> > Sent: Wednesday, December 14, 2005 9:03 AM > Subject: RE: CS>HOMEMADE VS. SOVEREIGN, LYME DISEASE > Hi Andrea, > Where did you get the dat that the 3-9 only produce a 2 to 3 ppm silver > solution? > Whoever told you that is illiterate about the whole process. > you can get almost whatever concentration you want. > Its just a matter of time. > How do you know the concentration ? Have you had it measured with an > approved device? If not you have no idea what you have.!!!!!! > Don't spend your money on sovereign silver, your home made will work just > as well. > "Ole Bob" -- -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Address Off-Topic messages to: [email protected] The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour <[email protected]>
