Hi Scott, Is there any way to get the details of the old tests? How they were setup, and what was used for load testing/call generation etc (SIPp?) I have some decent hardware available that I could do some load testing on:
Dell PowerEdge R900 - 4 Quad Core 2.4Ghz Processors 16M Cache CPU - 64GB RAM Dell PowerEdge 2950 - 2 Quad Core 2.66Ghz Processors 6M Cache CPU - 32GB RAM Dell PowerEdge 1950 - 2 Quad Core 2.5Ghz Processors 6M Cache CPU - 16GB RAM I don't really know what a typical deployment of sipX looks like, so I'm not sure what a "clean" baseline "should" look like. On Thu, Jun 18, 2009 at 2:14 PM, Scott Lawrence <[email protected]>wrote: > > I agree that the limit is way too low. It was set to this based on > performance testing we did a couple of years ago - it's possible that on > better hardware available now it could be increased. If someone is > interested in doing the testing/development work on this, here's your > chance to be a hero... > > > >
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
