The phone's interface (Siemens OpenStage) works by telling the phone
to contact the server, then having the server respond with the commands
once the phone requests them. Downloading a configuration is done by
having the server's command be "write these items to your
configuration", a reboot is done by saying "restart" instead so the
procedure is identical between restart and config update, just that a
different command is sent at the end. The restart isn't necessary for
deploying the configuration. However after projecting the config the
next page in the config web interface asks if you want to restart the
phone aned has that checked by default, it's an unnecessary step for
these phones since the reboot does nothing except add more downtime. I'm
wondering whether the phone needs the reboot option in the web interface
at all if it isn't needed for provisioning so it wouldn't confuse the
user. The only use would be troubleshooting and in that case I could
imagine it being feasible to be physically near the phone anyway.
Am 07.09.2010 14:41, schrieb Tony Graziano:
The restart is so the phone picks up the config (assuming it is
subscribed at the time of projection), by restarting it so it grabs
the new config file.
That is a default setting, and to change it would require a JIRA issue
and agreement with user/developers that this should be "optional".
I (for one) do not find it an issue.
If the phone is NOT subscribed or does not respond to the restart
request in a timely manner, it will show as a failed job in "Job
Status". This IS a design intent.
- Tony
On Tue, Sep 7, 2010 at 8:36 AM, Michal Bielicki
<[email protected]
<mailto:[email protected]>> wrote:
send config creates a config in the tftp directory. Restarting the
phone makes it reload the config.
How else do you want to get the config into the phone ?
Am 07.09.2010 um 14:30 schrieb David Becker:
I'm adding a phone model to SipXconfig that has its config
pushed to
it when you hit "send config" (or project config? It's localized as
send) but afterwards the interface will prompt for a restart with
"restart affected devices" ticked by default. Since that'd
unnecessarily
waste a lot of time (AFAIK none of the settings require a restart
when
changed) I don't want the phones to restart by default, can I
change the
default, should I remove the restart function for the phone or is
there
another solution?
_______________________________________________
sipx-dev mailing list
[email protected] <mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
Michal Bielicki
Geschäftsführer / CEO
Seventh Signal Ltd. & Co. KG
Meiereifeld 2A
14532 Kleinmachnow
Büro Berlin:
Weigandufer 45, Büro 115
12059 Berlin
Amtsgericht Potsdam HRA 4866 P, Ust.-ID: DE266981999
Geschäftsführer: Michal Bielicki
Persönlich Haftende Gesellschafterin:
Seventh Signal Ltd, 69 Great Hampton St. Birmingham,
B18 6EW, GB, Company Nr.: 06889439
WWW.: http://www.seventhsignal.de
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
