Quoting Scott Lawrence <[email protected]>: > > On Tue, 2008-12-16 at 18:30 -0200, [email protected] wrote: >> >> Looking at the sipregistrar directly there seems to be an error with >> invalid >> nonce. But I haven't a clue to what this means... > > It usually means that the user agent changed either the call-id value or > the From tag parameter value in the request between the request that got > a 401 response and the request it sent with authentication. This is an > error and won't work.
I noticed with the other hardware (non Asterisk) that registers correctly, that it sends 1st register gets a 401 and then sends a 2nd register (with different info) and gets registered. The Asterisk sends the same register over and over. So there is no second attempt, I think that's the problem. > > In your earlier description, you said: > >> Now I need to connect a client that has an Asterisk Server with 10 >> phones. I created a user in Sipxpbx. I created a Sip Trunk Route in >> the >> Asterisk to the Sipxpbx, > > If you're requirement is to route calls _to_ that Asterisk server in > order to call those 10 lines, you could do that by configuring the > address of the Asterisk server as an Unmanaged Gateway and create a dial > plan that routes those numbers there.... > No my problem is to route call out of the asterisk in to the Sipxpbx so I can terminate them on my GSM Gateways. Thanks again for your advice Scott, Alberto _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
