Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <46857> Message-ID: <[email protected]>
I had it setup all internally, I was able to call from Cisco to polycom and talk but from polycom to Cisco it would go directly to VM, this was a while back but I'll set it all up again and see because I could use it. Also, I had the same issue from the ACD, if I added the Cisco phones to the ACD and sign in and then call the ACD it would just sit on the ACD and never go to the phone, when I set the Polycom instead it would work just fine. On both cases I'd capture the traffic going into the Cisco and see the traffic hitting the Cisco phone and getting rejected with an sip error message, I'll have to do it again to give you the message number. I'll need a few days to set this back up and I'll posted as soon as I do it. Thanks, _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
