I thought I had tried that combination and still had early media. I'll look again and report back.
On 06/11/2010 09:39 AM, Saint, David (David) wrote: > > > >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of >> Josh Patten >> Sent: Thursday, June 10, 2010 7:00 PM >> To: [email protected] >> Subject: Re: [sipx-users] Audiocodes gateways disable voice detection >> >> I'm at my wits end. If I turn off all voice activity >> detection it simply leaves the call in early media >> (disconnecting it at 60 seconds) Is there any way to make the >> audiocodes show the call as "answered" >> immediately after dialing? >> >> Josh Patten >> Assistant Network Administrator >> Brazos County IT Dept. >> (979) 361-4676 >> >> > Maybe there's a bug in the version of AudioCodes FXO firmware that > you're using? With firmware 5.80A.023.006 and > "ENABLEVOICEDETECTION=0 (disable)" and "ENABLEEARLYMEDIA=1 (enable)" > the outgoing call gets "100 Trying" when it seizes the PSTN line > and "200 OK" after dialing the digits. The far end answers and the > call is still up after 5 minutes. > > Dave. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
