(note: noone has ever reported getting at&t to allow sending to port 5080, we had a template in the system from the very original days of testing with at&t when sipxbrdidge was being built. truly we have some templates in there that need updating, removal and insertion.)
On Tue, Dec 6, 2011 at 1:54 PM, Michael Picher <[email protected]> wrote: > The role(s) of the SBC are generally: > > Terminate SIP Trunks > Firewall SIP connections > Deal with signalling differences > > > We have a software based SBC integrated into sipXecs called sipXbridge. > It however is not as robust as specialized products from Ingate, Acme > Packet and the like. > > Additionally, some SIP trunk providers will only work with their certified > products. So, leveraging the certifications of a big name SBC let's you get > around this. > > So, the real questions, if AT&T will let you connect a SIP trunk directly > to sipXecs are, will they route to 5080 udp, and does sipXbridge have all > the settings that you'll need. I believe there's a template for them > already in the system. > > Thanks, > Mike > > > On Tue, Dec 6, 2011 at 1:44 PM, Pete Burgess <[email protected]> wrote: > >> I’ll expand on this a bit as I’m really not familiar with SBCs and as >> such the Karoo example on the wiki is a bit confusing to me at the moment. >> I guess I’ve never really understood correctly the role of an SBC.**** >> >> ** ** >> >> We’re just going to have a Flex IP trunk straight into SipX (at least, >> hopefully). The AT&T pipe will have a 1.1.x.x address and SipX will also >> have an address on that network. It’s a VM so I can just throw another >> vmNIC on it.**** >> >> ** ** >> >> Do I still need an SBC or can I just get AT&T to point all the SIP >> traffic from their end to port 5080 on my SipX ?**** >> >> ** ** >> >> Thanks >> >> Pete**** >> >> ** ** >> >> ** ** >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Tony Graziano >> *Sent:* Tuesday, December 06, 2011 1:08 PM >> >> *To:* Discussion list for users of sipXecs software >> *Subject:* Re: [sipx-users] AT&T IP Flex**** >> >> ** ** >> >> Neither of those are very robust. You should consider Karoo.**** >> >> On Tue, Dec 6, 2011 at 1:04 PM, Pete Burgess <[email protected]> wrote:* >> *** >> >> Well, they’ll be just throwing in whatever AT&T throws in these days. I >> assume it’s either a Cisco or an Edgemarc 4608T.**** >> >> **** >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Tony Graziano >> *Sent:* Tuesday, December 06, 2011 1:03 PM >> *To:* Discussion list for users of sipXecs software >> *Subject:* Re: [sipx-users] AT&T IP Flex**** >> >> **** >> >> they work fine as long as you use a very capable external sbc.**** >> >> On Tue, Dec 6, 2011 at 12:50 PM, Pete Burgess <[email protected]> wrote: >> **** >> >> Hi folks**** >> >> **** >> >> Anyone aware of the latest on running SipX with AT&T IP Flex ? It’s not >> on AT&T’s “officially approved” list so they’re reticent. I did see a post >> from Ranga about it working well but that was from a couple of years ago. >> Just hoping to make sure the situation is still the same.**** >> >> **** >> >> Thanks >> >> Pete**** >> >> **** >> >> ___________________________________________________**** >> >> Pete Burgess >> Integrated Technical Services >> 919.674.0044**** >> >> www.itsco.com**** >> >> **** >> >> Advanced Engineering Services**** >> >> *Aruba Networks, Barracuda, EMC/VMware, Microsoft, Cisco, Linux, Symantec >> ***** >> >> *Data Center, Business Continuity, Software and Systems Design >> IT Management Consulting, Enterprise LAN/WAN and***** >> >> *Carrier Network Services***** >> >> **** >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/**** >> >> >> >> **** >> >> **** >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services!**** >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/**** >> >> >> >> **** >> >> ** ** >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.465.6833 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services!**** >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > Michael Picher, Director of Technical Services > eZuce, Inc. > > 300 Brickstone Square**** > > Suite 201**** > > Andover, MA. 01810 > O.978-296-1005 X2015 > M.207-956-0262 > @mpicher <http://twitter.com/mpicher> > www.ezuce.com > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services!
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
