So far I never run into any problems installing MT on any system because there was stuff on the HD. The load fails right when it starts to pull boot data from the CD. Just curious tried a different CDrom drive ? Tried reset the BIOS settings to "safe mode" settings ?
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - -- GV> Yes, it is set to boot from CD. It is actually a good motherboard, an ECS GV> K7S5A, one we have used a lot in systems and had very good luck with. I GV> think Kevin may have hit it on the head - there may be a previous install of GV> some other software on the HD that is causing the problem. I am going to GV> try and use a disk wipe utility to clear any partitions on the hard drive GV> and try the boot from CD again. GV> Thanks, GV> Gloria GV> ----- Original Message ----- GV> From: "John Banes" <[EMAIL PROTECTED]> GV> To: <[EMAIL PROTECTED]> GV> Sent: Saturday, September 06, 2003 8:05 AM GV> Subject: Re: [smartBridges] Client Authentication >> Your BIOS does support boot from CD? The old junker we use for a test box >> doesn't and we have to load from the Floppy drive. >> >> John >> >> ----- Original Message ----- >> From: "Gloria Vester" <[EMAIL PROTECTED]> >> To: <[EMAIL PROTECTED]> >> Sent: Friday, September 05, 2003 07:16 PM >> Subject: Re: [smartBridges] Client Authentication >> >> >> > Thanks for the offer - let me see if I can get the MikroTik working with >> > Eje's help first. I have already reconfigured my box for that software >> > instead of the BriLan. If I can get the software to load, then it >> shouldn't >> > be any trouble to setup, Eje walked me through the setup portion on his >> demo >> > unit. But the CD image file won't work. >> > >> > Gloria >> > >> > ----- Original Message ----- >> > From: "Martin Moreno" <[EMAIL PROTECTED]> >> > To: <[EMAIL PROTECTED]> >> > Sent: Friday, September 05, 2003 8:57 PM >> > Subject: Re: [smartBridges] Client Authentication >> > >> > >> > > IF you need help with ther brilan contact me offline and I will help >> you.. >> > > >> > > Just have to find a day where we can hook up via phone and walk you GV> thru >> > it.. >> > > >> > > Quoting Gloria Vester <[EMAIL PROTECTED]>: >> > > >> > > > Well, that is what I had heard from others, so decided to try the >> > BriLan. >> > > > I >> > > > got as far as loading the software on the box, gave it an IP, and GV> put >> it >> > on >> > > > my network but couldn't see it. Basically, I couldn't figure out GV> what >> > to >> > > > do >> > > > with it and gave up. Then Eje suggested the MikroTik and it seemed >> easy >> > > > the >> > > > way he told me to set it up, but I can't get the CD version of the >> > software >> > > > to load on my box, which I know is a working PC. Truthfully, I have >> had >> > > > very little time to work on it, I've been so busy getting everything >> > else >> > > > up >> > > > and running and dealing with customers, that I haven't had a lot of >> time >> > to >> > > > spend on it. But I couldn't get either the BriLan or the MikroTik >> > software >> > > > to load and work, and I know the box we put them on is good. >> > > > >> > > > Gloria >> > > > >> > > > ----- Original Message ----- >> > > > From: "Martin Moreno" <[EMAIL PROTECTED]> >> > > > To: <[EMAIL PROTECTED]> >> > > > Sent: Friday, September 05, 2003 8:33 PM >> > > > Subject: Re: [smartBridges] Client Authentication >> > > > >> > > > >> > > > > Brilan is way easier to deal with althought the mikrotik has more >> > > > features >> > > > but >> > > > > Brilan will have the same by the end of the year. The brilan demo >> keep >> > in >> > > > mind >> > > > > only works for 2 hours then you have to reboot the box to get >> another >> > 2 >> > > > hours I >> > > > > found this out the hard way. It will not work well on those all in >> one >> > > > machiens >> > > > > like HP, Compaq etc.. I had mine up and running in less then a 1/2 >> > hour >> > > > > Miktorik is a pain in the ass to set up and maintain with the gui GV> as >> > well >> > > > as >> > > > > without the command line interface.. and trying to get support >> forget >> > ti >> > > > I >> > > > went >> > > > > 3 months postig to their mail forum trying to figure out how to do >> > bridge >> > > > mode >> > > > > and no one ever answered so I went to Brilan Tony is awesome and >> > > > sometimes >> > > > > answers at wierd hours when you least expect it which is awesome.. >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > You have to jump throug 3-4 hoops to make a bandwidth queue then GV> mac >> > > > > autehntication is a pain then you haev to do several other thigns GV> to >> > > > throttle >> > > > > one customer where as brilan takes abotu 2 steps and takes me less >> > then 2 >> > > > min >> > > > > to configure a user.. >> > > > > >> > > > > >> > > > > Quoting Gloria Vester <[EMAIL PROTECTED]>: >> > > > > >> > > > > > OK, can you help me figure out why the MikroTik router software GV> I >> > > > downloaded >> > > > > > and burned to CD won't load on the box we built for it? I have >> > burned >> > > > the CD >> > > > > > three times, downloaded the file twice, but it will not load. >> When >> > I >> > > > try to >> > > > > > boot from the CD, it comes up to the first line, something about >> > > > loading >> > > > a >> > > > > > kernel, then beeps and throws garbage on the screen that GV> continues >> > > > rolling >> > > > > > until you shut it off. We built a box with an ECS K7S5A mobo, GV> 700 >> > MHz >> > > > AMD >> > > > > > proc, 3 GB HD, and standard AGP video card. Any ideas? I have >> been >> > on >> > > > the >> > > > > > air for over a month now with no bandwidth control, even though GV> I >> am >> > > > selling >> > > > > > tiered bandwidth, because I have not been able to get anything >> > working. >> > > > I >> > > > > > tried the BriLan demo and couldn't get it working, now the >> MikroTik >> > > > won't >> > > > > > even load. >> > > > > > >> > > > > > Thanks for any help, >> > > > > > Gloria >> > > > > > >> > > > > > ----- Original Message ----- >> > > > > > From: Kevin Summers >> > > > > > To: [EMAIL PROTECTED] >> > > > > > Sent: Friday, September 05, 2003 6:35 PM >> > > > > > Subject: RE: [smartBridges] Client Authentication >> > > > > > >> > > > > > >> > > > > > The MikroTik router OS runs on just about any old PC you might >> > > > > > have laying around. Throw two network cards into it and you've >> got >> > > > > > a router. >> > > > > > Kevin Summers >> > > > > > KISTech Internet Services Inc. >> > > > > > www.kistech.com >> > > > > > >> > > > > > >> > > > > > >> > > > > > -----Original Message----- >> > > > > > From: [EMAIL PROTECTED] >> > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Sevak GV> Avakians >> > > > > > Sent: Friday, September 05, 2003 3:51 PM >> > > > > > To: [EMAIL PROTECTED] >> > > > > > Subject: RE: [smartBridges] Client Authentication >> > > > > > >> > > > > > >> > > > > > Hi Kevin, >> > > > > > >> > > > > > I've taken a look at MicroTik's website and it seems to be >> > software >> > > > that >> > > > > > runs on a desktop. Is this correct or is it a separate piece of >> > > > hardware >> > > > > > similar to a Linksys or Cysco, etc. router? >> > > > > > >> > > > > > Thanks, >> > > > > > Sevak >> > > > > > >> > > > > > On Thu, 2003-09-04 at 19:25, Kevin Summers wrote: >> > > > > > Actually it's just the PPTP and HotSpot clients that get the >> > > > > > DHCP addresses. PPPoE clients just get their assigned IP from >> > > > > > the PPPoE login. >> > > > > > >> > > > > > The MikroTik router actually handles the HotSpot login page. >> Through >> > > > > > the use of Firewall rules we've set things up to allow a link GV> from >> > > > > > the HotSpot login page to a secure page on our web server so GV> that >> > > > > > people can sign up. >> > > > > > >> > > > > > Kevin Summers >> > > > > > KISTech Internet Services Inc. >> > > > > > www.kistech.com >> > > > > > >> > > > > > >> > > > > > >> > > > > > > -----Original Message----- >> > > > > > > From: [EMAIL PROTECTED] >> > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Dennis >> Burgess >> > > > > > > Sent: Thursday, September 04, 2003 4:14 PM >> > > > > > > To: [EMAIL PROTECTED] >> > > > > > > Subject: Re: [smartBridges] Client Authentication >> > > > > > > >> > > > > > > >> > > > > > > Kevin, >> > > > > > > >> > > > > > > Question, >> > > > > > > >> > > > > > > Why do you need to give your clients a DHCP IP ? The PPPOE GV> does >> > that >> > > > > > > already correct? Also, using the hotspot stuff, if a custoemer >> > > > assoicates >> > > > > > > with one of my APs, could i setup a way so that they could GV> only >> > get >> > > > to >> > > > my >> > > > > > > webserver? or a speical page saying, you can get our signal GV> ?? >> > > > > > > >> > > > > > > Dennis >> > > > > > > >> > > > > > > ----- Original Message ----- >> > > > > > > From: "Kevin Summers" <[EMAIL PROTECTED]> >> > > > > > > To: <[EMAIL PROTECTED]> >> > > > > > > Sent: Wednesday, September 03, 2003 6:23 PM >> > > > > > > Subject: RE: [smartBridges] Client Authentication >> > > > > > > >> > > > > > > >> > > > > > > > >> > > > > > > > We're using the MikroTik Router OS for PPTP, PPPoE, and >> HotSpot >> > > > > > > > authentication using username and password. No WEP GV> encryption >> on >> > > > > > > > any of the network. If it's so insecure, why take the >> > performance >> > > > > > > > hit. Can't do WEP when doing HotSpot anyway... >> > > > > > > > >> > > > > > > > Radios and such are on private static IPs, customers get a >> > private >> > > > > > > > DHCP IP until they log in, then they are given either their >> > NATed >> > > > > > > > private DHCP IP, or their public static IP. >> > > > > > > > >> > > > > > > > Kevin Summers >> > > > > > > > KISTech Internet Services Inc. >> > > > > > > > www.kistech.com >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > > -----Original Message----- >> > > > > > > > > From: [EMAIL PROTECTED] >> > > > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of GV> Rudolph >> > > > Worrell >> > > > > > > > > Sent: Wednesday, September 03, 2003 4:08 PM >> > > > > > > > > To: [EMAIL PROTECTED] >> > > > > > > > > Subject: [smartBridges] Client Authentication >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > How do you authenticate your customers? I am simply suing >> WEP >> > > > and >> > > > a >> > > > > > > DHCP >> > > > > > > > > server. >> > > > > > > > > >> > > > > > > > > How many IP's do you have in your IP pool? I have 1000 GV> but >> I >> > am >> > > > > > > > > not sure it >> > > > > > > > > will be enough when I get up to about 250 customers. >> > > > > > > > > >> > > > > > > > > I use a separate IP scheme for the CPE and backhuals and >> this >> > > > works >> > > > > > > fine. >> > > > > > > > > >> > > > > > > > > Anyone else doing this? >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > -- >> > > > > > > > > Rudolph Worrell >> > > > > > > > > President >> > > > > > > > > Phone:(540)664-3950 >> > > > > > > > > Fax:(270)458-6431 >> > > > > > > > > www.wave2net.com >> > > > > > > > > >> > > > > > > > > ------------------------------------------------- >> > > > > > > > > This mail sent through IMP: http://horde.org/imp/ >> > > > > > > > > ----------ANNOUNCEMENT---------- >> > > > > > > > > Don't forget to register for WISPCON IV >> > > > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > > > > > >> > > > > > > > > The PART-15.ORG smartBridges Discussion List >> > > > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type >> > subscribe >> > > > > > > > > smartBridges <yournickname> >> > > > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> > > > > > > > > unsubscribe smartBridges) >> > > > > > > > > Archives: http://archives.part-15.org >> > > > > > > > >> > > > > > > > ----------ANNOUNCEMENT---------- >> > > > > > > > Don't forget to register for WISPCON IV >> > > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > > > > >> > > > > > > > The PART-15.ORG smartBridges Discussion List >> > > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type >> subscribe >> > > > > > > smartBridges <yournickname> >> > > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> > > > unsubscribe >> > > > > > > smartBridges) >> > > > > > > > Archives: http://archives.part-15.org >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > ----------ANNOUNCEMENT---------- >> > > > > > > Don't forget to register for WISPCON IV >> > > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > > > >> > > > > > > The PART-15.ORG smartBridges Discussion List >> > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type GV> subscribe >> > > > > > > smartBridges <yournickname> >> > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> > > > > > > unsubscribe smartBridges) >> > > > > > > Archives: http://archives.part-15.org >> > > > > > ----------ANNOUNCEMENT---------- >> > > > > > Don't forget to register for WISPCON IV >> > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > > >> > > > > > The PART-15.ORG smartBridges Discussion List >> > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > > > smartBridges >> > > > > > <yournickname> >> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type >> unsubscribe >> > > > > > smartBridges) >> > > > > > Archives: http://archives.part-15.org >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > > Martin Moreno >> > > > > Blazen Wireless >> > > > > 909-907-4106 >> > > > > www.blazenwireless.com >> > > > > ----------ANNOUNCEMENT---------- >> > > > > Don't forget to register for WISPCON IV >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > > >> > > > > The PART-15.ORG smartBridges Discussion List >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > > > smartBridges <yournickname> >> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type GV> unsubscribe >> > > > smartBridges) >> > > > > Archives: http://archives.part-15.org >> > > > > >> > > > > >> > > > >> > > > >> > > > ----------ANNOUNCEMENT---------- >> > > > Don't forget to register for WISPCON IV >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > > >> > > > The PART-15.ORG smartBridges Discussion List >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > smartBridges >> > > > <yournickname> >> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> > > > smartBridges) >> > > > Archives: http://archives.part-15.org >> > > > >> > > >> > > >> > > Martin Moreno >> > > Blazen Wireless >> > > 909-907-4106 >> > > www.blazenwireless.com >> > > ----------ANNOUNCEMENT---------- >> > > Don't forget to register for WISPCON IV >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > > >> > > The PART-15.ORG smartBridges Discussion List >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> > smartBridges <yournickname> >> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> > smartBridges) >> > > Archives: http://archives.part-15.org >> > > >> > > >> > >> > >> > ----------ANNOUNCEMENT---------- >> > Don't forget to register for WISPCON IV >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> > >> > The PART-15.ORG smartBridges Discussion List >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> smartBridges <yournickname> >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> smartBridges) >> > Archives: http://archives.part-15.org >> > >> >> >> ----------ANNOUNCEMENT---------- >> Don't forget to register for WISPCON IV >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm >> >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe GV> smartBridges <yournickname> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe GV> smartBridges) >> Archives: http://archives.part-15.org >> >> GV> ----------ANNOUNCEMENT---------- GV> Don't forget to register for WISPCON IV GV> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm GV> The PART-15.ORG smartBridges Discussion List GV> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> GV> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) GV> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
