I had some initial trouble on this board as well, but in different ways, and a restore of bios defaults fixed it. If you have the v 1.0a bios, upgrade it to the current rev… it’s far better.
> On Jul 13, 2016, at 5:17 PM, Nigel W <[email protected]> wrote: > > On Wed, Jul 13, 2016 at 2:31 PM, Nigel W <[email protected]> wrote: > If the driver isn’t configured with any interfaces, it will automatically > detach shortly after boot finishes. Do the ixgbe interfaces show up when you > run: dladm show-phys > No, just the two igb interfaces. > > Thanks, > Hrmm. So, apparently the answer is to restore optimized defaults in the BIOS. > > I am also having issues with the SOL on this board (the KVM part works fine > though), and in trying to troubleshoot the SOL issue, I restored defaults in > the BIOS and on the next boot the X550 nics were there and working... The > SOL doesn't work in Linux either so, its probably not SmartOS itself causing > that issue. > > Thanks, > smartos-discuss | Archives | Modify Your Subscription ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
