Hi Paul, thanks for answering! Unfortunately, that doesn't solve my issues. (I already have this setting configured. Sorry, didn't mention that before.)
> Am 14.01.2017 um 11:10 schrieb Paul Sture <[email protected]>: > > On 14 Jan 2017, at 11:06, Paul Sture wrote: > > Small correction follows: > >> >> >> What I did with my Gen8 was to change the BIOS so that it doesn't use the HP >> RAID setup. >> >> I've got the BIOS setup in front of me now. >> >> In the BIOS I selected System Setup (F9), then System -> SATA Controller >> Options -> Embedded SATA Configuration. >> >> IIRC I then selected "SATA Legacy Support" - the other options in there are >> "SATA AHCI Support" and "Dynamic HP Smart Array B120i RAID Support". My aim >> here was to disabled the HP RAID. > > Now that I've done a reboot, it came up with "HP SATA AHCI", so it looks like > I didn't select the "Legacy Support" option. > >> FWIW the HP Microserver brochures and documentation (Gen8 and previous >> models) leave you in no doubt that disk Hot Swap is not supported, but >> as far as I can tell, this only applies to the HP RAID setup. > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
