Your main problem will be having both SDRadio and PowerSDR running at the same time because in order to tune and change bands you have to use the PowerSDR software ... So you'll have to figure out a way to get PowerSDR to tune the SDR-1000 but route the outputs to SDRadio and disable the outputs from PowerSDR ... it's probably doable but you never know how well they'll play together until you try
As for specifics on how to do it I can't help much because I don't have an SDR-1000 JR --- In [email protected], "g0dja" <[EMAIL PROTECTED]> wrote: > > Sorry if this has been asked before, I did a search and looked in the > files but couldn't see any other references, but can someone let me > know how to set SDRadio to work with the SDR1000 hardware please? > > I had a quick go, but must have got something badly wrong as the > program hung, stopped responding and the PC would not reboot unless I > pressed the reset button! > > I am using the M-Audio Delta44 soundcard to interface between the PC > and the SDR1000 hardware. > > Thanks for any advice. > > Regards - Dave (G0DJA) > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/soft_radio/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/soft_radio/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
