jr_dakota wrote:
> Your main problem will be having both SDRadio and PowerSDR running at
> the same time because in order to tune and change bands you have to
> use the PowerSDR software ... So you'll have to figure out a way to
> get PowerSDR to tune the SDR-1000 but route the outputs to SDRadio and
> disable the outputs from PowerSDR ... it's probably doable but you
> never know how well they'll play together until you try
>
> As for specifics on how to do it I can't help much because I don't
> have an SDR-1000
>
I didn't realise that SDRadio wouldn't be able to alter the frequency.
That's going to be a big limiting factor...
So, there must be a way to copy the I/Q channels across to SDRadio
then? I'll do a bit of digging.
Regards - Dave (G0DJA)
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/soft_radio/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/soft_radio/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
