just played a bit with overclocking... now I pushed PCI GEN in bios back to auto instead of GEN 3 so it is now PCI 2.0 x16 instead of 3.. That alone gave me slightly higher score on cinebench.. and after overclocking CPU to 4.5 now new result in cinebench for titan is 100, and script in softimage gives me ~200 fps. Oh well...
On Thu, Jan 9, 2014 at 8:24 PM, Mirko Jankovic <[email protected]>wrote: > yes fps is score. hmm maybe if I got some time I could get one of titans > and test it out on maximus MBO to see if that is the diference... > > > On Thu, Jan 9, 2014 at 8:09 PM, Emilio Hernandez <[email protected]>wrote: > >> Dumb question here. Where do I see the score? I only get a fps result >> for OpenGl and a 759cb in the CPU results in Cinebench. >> >> and I get 75.78fps at the OpenGl test. >> >> >> >> >> 2014/1/9 Mirko Jankovic <[email protected]> >> >>> cinebench you mean? so what is score? :) >>> >>> >>> On Thu, Jan 9, 2014 at 7:47 PM, Emilio Hernandez <[email protected]>wrote: >>> >>>> Now I am starting to scratch my head to figure out the maze of Nvidia... >>>> >>>> At least my benchmark said the Titatn beated up a Quadro 4000K.... ha ha >>>> >>>> >>>> >>>> >>>> 2014/1/9 Mirko Jankovic <[email protected]> >>>> >>>>> getting around 95 score in cinebench with titan, and again 780 in home >>>>> comp getting 140 score in cinebench... >>>>> wondering how can 780 crash titan so much in opengl. >>>>> >>>>> titan system beside 4 titans have i7 3930K, asus p9x79-e ws MBO >>>>> and home comp i7 4770k on asus maximus VI hero >>>>> >>>>> Will test some redshift rendering later to compare single GPU 780 vs >>>>> titan >>>>> >>>>> >>>>> On Thu, Jan 9, 2014 at 7:11 PM, Emilio Hernandez <[email protected]>wrote: >>>>> >>>>>> Yes specailly if you are getting more than the double speed. >>>>>> >>>>>> I ran the test and I got 75.78 fps >>>>>> >>>>>> Thx >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> 2014/1/9 Mirko Jankovic <[email protected]> >>>>>> >>>>>>> yea I guess that woul dbe the case but just tried.. strange really >>>>>>> no idea.. any chance to run cinebench 15 opengl test then? if that gives >>>>>>> too low result as well then something is not good >>>>>>> >>>>>>> >>>>>>> On Thu, Jan 9, 2014 at 6:58 PM, Emilio Hernandez >>>>>>> <[email protected]>wrote: >>>>>>> >>>>>>>> It is set to ALL. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2014/1/9 Mirko Jankovic <[email protected]> >>>>>>>> >>>>>>>>> hmm another gues.. is it set to RT or ALL in play? >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, Jan 9, 2014 at 6:53 PM, Emilio Hernandez < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> I already did that and still getting the 65 fps limit with the >>>>>>>>>> Titan. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2014/1/9 Mirko Jankovic <[email protected]> >>>>>>>>>> >>>>>>>>>>> just got back , yes 60 is vsync on, turn of vsync in nvida >>>>>>>>>>> control panel >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, Jan 9, 2014 at 5:52 PM, Stefan Kubicek < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> I guess 60fps is the refresh rate of your display, right? >>>>>>>>>>>> Have you disabled VSync in the driver settings? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I just get "60.0 fps +" >>>>>>>>>>>> How are you getting it display a value higher than 60? I'm >>>>>>>>>>>> pretty sure it the actual fps is higher, but the value in the >>>>>>>>>>>> viewport is >>>>>>>>>>>> capped at 60.... >>>>>>>>>>>> -Tim >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 1/9/2014 10:12 AM, Leonard Koch wrote: >>>>>>>>>>>> >>>>>>>>>>>> I get about 28-31 out of my 680. Does anyone have a common >>>>>>>>>>>> explanation for that? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Jan 9, 2014 at 5:10 PM, Emilio Hernandez < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hey Mirko I ran your script and I got 50.7 fps... >>>>>>>>>>>>> >>>>>>>>>>>>> But then I remembered I have my displays plugged in to my >>>>>>>>>>>>> 470.. hahaha. >>>>>>>>>>>>> >>>>>>>>>>>>> Don't ask why, but when using AE with the displays plugged >>>>>>>>>>>>> into the Ti, AE does not like it and disables GPU for >>>>>>>>>>>>> calculations... >>>>>>>>>>>>> >>>>>>>>>>>>> Pffff. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2014/1/9 Mirko Jankovic <[email protected]> >>>>>>>>>>>>> >>>>>>>>>>>>>> Hey Tim >>>>>>>>>>>>>> Would you be able to take 2 minutes of your tmie and run this >>>>>>>>>>>>>> ol python script for SI with your titan? >>>>>>>>>>>>>> I'm getting weird results with an 780 in my home system >>>>>>>>>>>>>> outperforming titan a lot... well here is copy paste from forum >>>>>>>>>>>>>> if you are >>>>>>>>>>>>>> able to check it out as well.. thanks!: >>>>>>>>>>>>>> >>>>>>>>>>>>>> itan: ~170 fps >>>>>>>>>>>>>> 780: ~245 fps >>>>>>>>>>>>>> >>>>>>>>>>>>>> Go figure [image: :)] >>>>>>>>>>>>>> But I'm suspecting something weird with my titan system for >>>>>>>>>>>>>> some time will have to test further but would be great if anyone >>>>>>>>>>>>>> with titan >>>>>>>>>>>>>> as well could run it too? >>>>>>>>>>>>>> This old python script: >>>>>>>>>>>>>> Application.CreatePrim("Cube", "MeshSurface", "", "") >>>>>>>>>>>>>> Application.SetValue("cube.polymsh.geom.subdivu", 831, "") >>>>>>>>>>>>>> Application.SetValue("cube.polymsh.geom.subdivv", 800, "") >>>>>>>>>>>>>> Application.SetValue("cube.polymsh.geom.subdivbase", 800, "") >>>>>>>>>>>>>> Application.SetValue("Camera.camvis.refreshrate", True, "") >>>>>>>>>>>>>> Application.SetDisplayMode("Camera", "shaded") >>>>>>>>>>>>>> Application.DeselectAll() >>>>>>>>>>>>>> Application.SetValue("PlayControl.Out", 5000, "") >>>>>>>>>>>>>> Application.DeselectAll() >>>>>>>>>>>>>> Application.GetPrim("Null", "", "", "") >>>>>>>>>>>>>> Application.SelectObj("Camera_Root", "", "") >>>>>>>>>>>>>> Application.CopyPaste("Camera_Root", "", "null", 1) >>>>>>>>>>>>>> Application.SelectObj("null", "", "") >>>>>>>>>>>>>> Application.SaveKey("null.kine.local.rotx,null.kine.local.roty,null.kine.local.rotz", >>>>>>>>>>>>>> 1, "", "", "", "", "") >>>>>>>>>>>>>> Application.SetValue("PlayControl.Key", 5000, "") >>>>>>>>>>>>>> Application.SetValue("PlayControl.Current", 5000, "") >>>>>>>>>>>>>> Application.Rotate("", 0, 8000, 0, "siAbsolute", "siPivot", >>>>>>>>>>>>>> "siObj", "siY", "", "", "", "", "", "", "", 0, "") >>>>>>>>>>>>>> Application.SaveKey("null.kine.local.rotx,null.kine.local.roty,null.kine.local.rotz", >>>>>>>>>>>>>> 5000, "", "", "", "", "") >>>>>>>>>>>>>> Application.FirstFrame() >>>>>>>>>>>>>> >>>>>>>>>>>>>> Just paste in python script run and hit play. >>>>>>>>>>>>>> Thakns! >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Jan 9, 2014 at 3:34 PM, Tim Crowson < >>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> We've been testing 1 Titan vs. 3 and so far, the speed >>>>>>>>>>>>>>> increase of the triple-Titan box is holding at about 2.45x. In >>>>>>>>>>>>>>> an email >>>>>>>>>>>>>>> exchange (or maybe it was on the forums, can't recall) it was >>>>>>>>>>>>>>> mentioned >>>>>>>>>>>>>>> that on the topic parallelization, Pixar had determined that >>>>>>>>>>>>>>> even for them, >>>>>>>>>>>>>>> 4 units together (of whatever, not necessarily Titans) was the >>>>>>>>>>>>>>> max they >>>>>>>>>>>>>>> could really go before it started to cost more money than it >>>>>>>>>>>>>>> was worth. In >>>>>>>>>>>>>>> our case, I'm thinking 3 might be our max, based on some nerdy >>>>>>>>>>>>>>> mathematics >>>>>>>>>>>>>>> by one of our IT guys analyzing render times per shot, per >>>>>>>>>>>>>>> frame, >>>>>>>>>>>>>>> hardware/software costs, rack space used, etc. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But hey, Redshift aside, the Titan in my workstation is >>>>>>>>>>>>>>> doing wonders for my viewport performance in Soft. I had a 58M, >>>>>>>>>>>>>>> 2500-item >>>>>>>>>>>>>>> model derived from a CAD file the other day, and this thing was >>>>>>>>>>>>>>> letting me >>>>>>>>>>>>>>> tumble around it at ~15fps in Shaded mode. That ain't shabby! >>>>>>>>>>>>>>> -Tim >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 1/9/2014 6:11 AM, Paul Griswold wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> There was a discussion on the RS forums about it. I don't >>>>>>>>>>>>>>> recall the numbers, though. I don't think the speed of the >>>>>>>>>>>>>>> PCIe slot made >>>>>>>>>>>>>>> a huge difference. It's really all about the speed of the card. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Also, although it doesn't load the entire scene into your >>>>>>>>>>>>>>> card's memory, the more memory your card has, the better it is. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But overall, for the type of work I'm mainly doing these >>>>>>>>>>>>>>> days, it's extremely fast. In fact, it's so fast that I was >>>>>>>>>>>>>>> finding the >>>>>>>>>>>>>>> bottleneck was the time taken to export the mesh to Redshift, >>>>>>>>>>>>>>> not >>>>>>>>>>>>>>> rendering. Redshift has a proxy system like Vray & Arnold, but >>>>>>>>>>>>>>> you have to >>>>>>>>>>>>>>> manually create proxies per object & my scene had hundreds and >>>>>>>>>>>>>>> hundreds of >>>>>>>>>>>>>>> objects, so I didn't have time to create them. Therefore, it >>>>>>>>>>>>>>> was creating >>>>>>>>>>>>>>> a renderable mesh per frame - so on a frame that took 28 >>>>>>>>>>>>>>> seconds to render, >>>>>>>>>>>>>>> 20 seconds was spent exporting the mesh and 8 seconds were >>>>>>>>>>>>>>> spent on >>>>>>>>>>>>>>> rendering. But again, it's a beta and they're continuing to >>>>>>>>>>>>>>> improve things >>>>>>>>>>>>>>> like the proxy system. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Once I'm caught up I'm hoping to try rendering the >>>>>>>>>>>>>>> classroom scene and see how it does. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -Paul >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ᐧ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>> Stefan Kubicek >>>>>>>>>>>> ------------------------------------------- >>>>>>>>>>>> keyvis digital imagery >>>>>>>>>>>> Alfred Feierfeilstraße 3 >>>>>>>>>>>> A-2380 Perchtoldsdorf bei Wien >>>>>>>>>>>> Phone: +43/699/12614231 >>>>>>>>>>>> www.keyvis.at [email protected] >>>>>>>>>>>> -- This email and its attachments are -- >>>>>>>>>>>> --confidential and for the recipient only-- >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
